Chair of Materials Physics (430)
Organisational unit: Chair
Research output
- 2004
- Published
Metallographische Präparationsmethoden für die Rasterkraftmikroskopie - Rasterkraft-mikroskopie als Werkzeug für die Materialographie
Schöberl, T., 2004, In: Practical metallography = Praktische Metallographie. 41, p. 321-333Research output: Contribution to journal › Article › Research › peer-review
- Published
Microfibril angle in wood: characterisation using X-ray scattering and influence on mechanical properties
Keckes, J., Burgert, I., Lichtenegger, H., Reiterer, A., Stanzl-Tschegg, S. & Fratzl, P., 2004, Proceedings of COST Action E20, Wood Fibre Cell Wall Structure. p. 189-202Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
Microstructural characterization of deformed volume beneath microindentations using FIB, EBSD and TEM
Motz, C., Kiener, D., Kreuzer, H., Prantl, W. & Pippan, R., 2004, Proceedings of the 25th Risø International Symposium on Materials Science: Evolution of Deformation Microstructures in 3D. p. 459-464Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
Microstructure and Thermal Stability of Tungsten based Materials after Severe Plastic Deformation
Vorhauer, A., Knabl, W. & Pippan, R., 2004, Proceedings of the Conference "Nanomaterials by Severe Plastic Deformation - NANOSPD2". p. 648-653Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
Modification of the Microstructure of Severely Deformed Steels
Wetscher, F., Stock, R. & Pippan, R., 2004.Research output: Contribution to conference › Poster › Research › peer-review
- Published
Nanostructured Materials produced by severe plastic deformation
Stüwe, H.-P., 2004, Metallic Materials with High Structural Efficiency. Kluwer Academic Publishers, p. 47-54Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
Numerical studies of crack sensitivity under continuous casting conditions
Böhm, H. J., Duschlbauer, D., Drabek, T., Kolednik, O. & Shan, G. X., 2004, Continuous Casting and Hot-Rolling Conference, CCR'04, Paper No. 6.2. p. ?-?Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
On the homogeneity of deformation by high pressure torsion
Vorhauer, A. & Pippan, R., 2004, In: Scripta materialia. 51, p. 921-925Research output: Contribution to journal › Article › Research › peer-review
- Published
Osteoporosis and local variations in Material Properties
Weber, M., Roschger, P., Reeve, J., Loveridge, N., Fratzl, P. & Klaushofer, K., 2004.Research output: Contribution to conference › Poster › Research › peer-review
- Published
Pulsed laser decomposition of silicon containing carbon thin films
Lackner, J. M., Waldhauser, W., Ebner, R., Fian, A., Jakopic, G., Leising, G. & Schöberl, T., 2004, In: Surface & coatings technology. 177-178, p. 360-364Research output: Contribution to journal › Article › Research › peer-review
- Published
Pulsed laser decomposition of titanium oxide coatings at room temperature - structural and tribological properties
Lackner, J. M., Waldhauser, W., Ebner, R., Major, B. & Schöberl, T., 2004, In: Surface & coatings technology. 180-181, p. 585-590Research output: Contribution to journal › Article › Research › peer-review
- Published
Residual stresses and size-strain phenomena in thermally cycled Cu layers on anisotropical SiO2(110) substrates
Eiper, E., Hafok, M., Eisenmenger-Sittner, C. & Keckes, J., 2004.Research output: Contribution to conference › Poster › Research › peer-review
- Published
Room temperature deposition of (Ti,Al)N and (Ti,Al)(C,N) coatings by pulsed laser deposition for tribological applications
Lackner, J. M., Waldhauser, W., Ebner, R., Keckes, J. & Schöberl, T., 2004, In: Surface & coatings technology. 177-178, p. 447-452Research output: Contribution to journal › Article › Research › peer-review
- Published
Room temperature pulsed laser deposited (Ti,Al)CxN1-x coatings-chemical, structural, mechanical and tribological properties
Lackner, J. M., Waldhauser, W., Ebner, R., Bakker, R. J., Schöberl, T. & Major, B., 2004, In: Thin solid films. 468.2004, 1. December, p. 125-133 9 p.Research output: Contribution to journal › Article › Research › peer-review
- Published
SAXS experiemtns on Y-ZrO powders and solutions using the NanoSTAR
Görgl, R. & Dehm, G., 2004Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
SAXS experiments on Brij400 gels using the NanoSTAR
Görgl, R. & Dehm, G., 2004Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
SAXS experiments on Ni-alloys using the nanoSTAR
Görgl, R. & Dehm, G., 2004Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Short cracks: A problem for the life-time prediction
Pippan, R., 2004, Proceedings of the 22nd CAD-FEM Users' Meeting 2004. p. ?-?Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
Simulation of nanoindentation: a discrete dislocation study
Kreuzer, H. G. M. & Pippan, R., 2004.Research output: Contribution to conference › Poster › Research › peer-review
- Published
Simultaneous evaluation of elastic and thermal strains in thermally-cycled thin films
Keckes, J., 2004.Research output: Contribution to conference › Poster › Research › peer-review
