New-generation biocompatible Ti-based metallic glass ribbons for flexible implants

Yüce, E., Zarazúa-Villalobos, L., Ter-Ovanessian, B., Sharifikolouei, E., Najmi, Z., Spieckermann, F., Eckert, J. & Sarac, B., 13 Sept 2022, In: Materials and Design. 223.2022, November, 13 p., 111139.

Research output: Contribution to journal › Article › Research › peer-review

Prior β grain evolution and phase transformation of selective laser melted Ti6Al4V alloy during heat treatment

Lu, S. L., Zhang, Z. F., Liu, R., Qu, Z., Wang, B., Zhou, X. H., Eckert, J. & Zhang, Z., 5 Sept 2022, In: Journal of alloys and compounds. 914.2022, 5 September, 13 p., 165235.

Research output: Contribution to journal › Article › Research › peer-review

Carbon nanotube-polybutadiene-poly(ethylene oxide)-based composite fibers: Role of cryogenic treatment on intrinsic properties

Gürbüz, R., Sarac, B., Soprunyuk, V., Rezvan, A., Yüce, E., Schranz, W., Eckert, J., Ozcan, A. & Sarac, A. S., 4 Sept 2022, In: Polymers for Advanced Technologies. 33.2022, 12, p. 3966-3976 11 p.

Research output: Contribution to journal › Article › Research › peer-review

Combining hardness measurements of a heat-treated crankshaft bearing with cross-sectional residual stress and retained austenite distributions measured by HEXRD

Mevec, D. G., Jászfi, V., Prevedel, P., Todt, J., Maawad, E., Keckes, J. & Raninger, P., 19 Aug 2022, (E-pub ahead of print) In: Materials Today Communications. 33.2022, December, 8 p., 104267.

Research output: Contribution to journal › Article › Research › peer-review

High-Entropy Alloy-Induced Metallic Glass Transformation: Challenges Posed by in situ Alloying via Additive Manufacturing

Hadibeik Neishaboori, S., Spieckermann, F., Nosko, M., Khodabakhshi, F., Heydarzadeh Sohi, M. & Eckert, J., 18 Aug 2022, (E-pub ahead of print) In: Advanced engineering materials. 24.2022, 2200764.

Research output: Contribution to journal › Article › Research › peer-review

Antibacterial activity, cytocompatibility, and thermomechanical stability of Ti₄₀Zr₁₀Cu₃₆Pd₁₄ bulk metallic glass

Rezvan, A., Sharifikolouei, E., Lassnig, A., Soprunyuk, V., Gammer, C., Spieckermann, F., Schranz, W., Najmi, Z., Cochis, A., Scalia, A. C., Rimondini, L., Manfredi, M., Eckert, J. & Sarac, B., 3 Aug 2022, In: Materials today bio. 16.2022, December, 13 p., 100378.

Research output: Contribution to journal › Article › Research › peer-review

Influence of Hatch Strategy on Crystallographic Texture Evolution, Mechanical Anisotropy of Laserbeam Powder Bed Fused S316L Steel

Bodner, S., Hlushko, K., Kutleša, K., Todt, J., Renk, O., Meindlhumer, M., Resch, F., Nielsen, M.-A., Keckes, J. & Eckert, J., 2 Aug 2022, In: Advanced engineering materials. 2022, 25 p., 2200524.

Research output: Contribution to journal › Article › Research › peer-review

100 years after Griffith: From brittle bulk fracture to failure in 2D materials

Kiener, D. & Han, S. M., Aug 2022, In: MRS Bulletin. 47.2022, August, p. 792-799 8 p.

Research output: Contribution to journal › Article › Research › peer-review

Achieving 1 GPa fatigue strength in nanocrystalline 316L steel through recovery annealing

Renk, O., Hohenwarter, A., Gammer, C., Eckert, J. & Pippan, R., Aug 2022, In: Scripta Materialia. 217.2022, August, 5 p., 114773.

Research output: Contribution to journal › Article › Research › peer-review

Crack propagation resistance of TiAl alloys

Pippan, R. & Hohenwarter, A., Aug 2022, In: MRS Bulletin. 47.2022, 8, p. 824-831 8 p.

Research output: Contribution to journal › Review article › peer-review

In situ micromechanical analysis of a nano-crystalline W-Cu composite

Burtscher, M., Alfreider, M., Kainz, C., Schmuck, K. S. & Kiener, D., Aug 2022, In: Materials and Design. 220.2022, August, 9 p., 110848.

Research output: Contribution to journal › Article › Research › peer-review

FIB and Wedge Polishing Sample Preparation for TEM Analysis of Sol-Gel Derived Perovskite Thin Films

Sanz-Mateo, J., Deluca, M., Sartory, B., Benes, F. & Kiener, D., 20 Jul 2022, In: Ceramics. 5.2022, 3, p. 288-300 13 p.

Research output: Contribution to journal › Article › Research › peer-review

Residual stress distribution of a locally and inductively quenched and tempered 50CrMo4 steel analysed by synchrotron transmission techniques

Jászfi, V., Prevedel, P., Raninger, P., Todt, J., Mevec, D., Godai, Y., Maawad, E. & Ebner, R., 16 Jul 2022, (E-pub ahead of print) In: Materials & design. 221.2022, September, 9 p., 110936.

Research output: Contribution to journal › Article › Research › peer-review

Enhanced Oxygen Evolution Reaction of Zr-Cu-Ni-Al Metallic Glass with an Oxide Layer in Alkaline Media

Sarac, B., Ivanov, Y. P., Micusik, M., Omastova, M., Sarac, A. S., Bazlov, A. I., Zadorozhnyy, V., Greer, A. L. & Eckert, J., 14 Jul 2022, In: ACS Catalysis. 12.20220, 15, p. 9190-9200 11 p.

Research output: Contribution to journal › Article › Research › peer-review

Mechanical behavior and deformation mechanism of shape memory bulk metallic glass composites synthesized by powder metallurgy

He, T., Lu, T., Şopu, D., Han, X., Lu, H., Nielsch, K., Eckert, J., Ciftci, N., Uhlenwinkel, V., Kosiba, K. & Scudino, S., 1 Jul 2022, In: Journal of Materials Science and Technology. 114.2022, 1 July, p. 42-54 13 p.

Research output: Contribution to journal › Article › Research › peer-review

Interaction of metallic magnesium with ammonia: Mechanochemical synthesis of Mg(NH₂)₂ for hydrogen storage

Hu, M., Sun, X., Li, B., Li, P., Xiong, M., Tan, J., Ye, Z., Eckert, J., Liang, C. & Pan, H., 25 Jun 2022, In: Journal of alloys and compounds. 907.2022, 25 June, 6 p., 164397.

Research output: Contribution to journal › Article › Research › peer-review

Fabrication of stainless-steel microfibers with amorphous-nanosized microstructure with enhanced mechanical properties

Sharifikolouei, E., Sarac, B., Zheng, Y., Bala, P. & Eckert, J., 24 Jun 2022, In: Scientific reports. 12.2022, 12 p., 10784.

Research output: Contribution to journal › Article › Research › peer-review

Influence of the 1% Ti content on microstructure, friction coefficient and contribution to the strengthening mechanisms in the Al20Sn1Cu alloy

Lucchetta, M. C., Ramasamy, P., Saporiti, F., Eckert, J. & Audebert, F. E., 22 Jun 2022, (E-pub ahead of print) In: Results in Engineering. 15.2022, September, 8 p., 100506.

Research output: Contribution to journal › Article › Research › peer-review

X-ray nanodiffraction analysis of residual stresses in polysilicon electrodes of vertical power transistors

Karner, S., Blank, O., Rösch, M., Burghammer, M., Zalesak, J., Keckes, J. & Todt, J., 20 Jun 2022, (E-pub ahead of print) In: Materialia. 24.2022, August, 6 p., 101484.

Research output: Contribution to journal › Article › Research › peer-review

Mapping Shear Bands in Metallic Glasses: From Atomic Structure to Bulk Dynamics

Sheng, H., Şopu, D., Fellner, S., Eckert, J. & Gammer, C., 16 Jun 2022, In: Physical review letters. 128.2022, 24, 6 p., 245501.

Research output: Contribution to journal › Article › Research › peer-review

Mitigating the detrimental effects of galvanic corrosion by nanoscale composite architecture design

Renk, O., Weißensteiner, I., Cihova, M., Steyskal, E.-M., Sommer, N., Tkadletz, M., Pogatscher, S., Schmutz, P., Eckert, J., Uggowitzer, P., Pippan, R. & Weinberg, A. M., 16 Jun 2022, In: npj Materials degradation. 47.2022, 6, 9 p.

Research output: Contribution to journal › Article › Research › peer-review

The importance of lamellar architecture to obtain ductility in heavily cold-worked pearlitic steels revealed by microbending experiments

Kapp, M. W., Renk, O., Eckert, J. & Pippan, R., 15 Jun 2022, In: Acta Materialia. 232.2022, 15 June, 8 p., 117935.

Research output: Contribution to journal › Article › Research › peer-review

Thermoplasticity of metallic glasses: Processing and applications

Sarac, B. & Eckert, J., Jun 2022, In: Progress in materials science. 127.2022, June, 57 p., 100941.

Research output: Contribution to journal › Review article › peer-review

Axially and radially inhomogeneous swelling in commercial 18650 Li-ion battery cells

Blazek, P., Westenberger, P., Erker, S., Brinek, A., Zikmund, T., Rettenwander, D., Wagner, N. P., Keckes, J., Kaiser, J., Kazda, T., Vyroubal, P., Macak, M. & Todt, J., 27 May 2022, (E-pub ahead of print) In: Journal of energy storage. 52.2022, 15 August, 10 p., 104563.

Research output: Contribution to journal › Article › Research › peer-review

The influence of chemistry on the interface toughness in a WTi-Cu system

Alfreider, M., Bodlos, R., Romaner, L. & Kiener, D., 15 May 2022, In: Acta Materialia. 230.2022, 15 May, 13 p., 117813.

Research output: Contribution to journal › Article › Research › peer-review

Helium-induced swelling and mechanical property degradation in ultrafine-grained W and W-Cu nanocomposites for fusion applications

Wurmshuber, M., Balooch, M., Huang, X., Hosemann, P. & Kiener, D., May 2022, In: Scripta materialia. 213.2022, May, 5 p., 114641.

Research output: Contribution to journal › Article › Research › peer-review

Additive Manufacturing of CoCrFeMnNi High-Entropy Alloy/AISI 316L Stainless Steel Bimetallic Structures

Sokkalingam, R., Chao, Z., Sivaprasad, K., Muthupandi, V., Jayaraj, J., Ramasamy, P., Eckert, J. & Prashanth, K. G., 27 Apr 2022, (E-pub ahead of print) In: Advanced engineering materials. 25.2023, 7, 9 p., 2200341.

Research output: Contribution to journal › Article › Research › peer-review

Composition design, synthesis and hydrogen storage ability of multi-principal-component alloy TiVZrNbTa

Zadorozhnyy, V., Tomilin, I., Berdonosova, E., Gammer, C., Zadorozhnyy, M., Savvotin, I., Shchetinin, I., Zheleznyi, M., Novikov, A., Bazlov, A., Serov, M., Milovzorov, G., Korol, A., Kato, H., Eckert, J., Kaloshkin, S. & Klyamkin, S., 25 Apr 2022, In: Journal of alloys and compounds. 901.2022, 25 April, 10 p., 163638.

Research output: Contribution to journal › Article › Research › peer-review

Deformation-induced medium-range order changes in bulk metallic glasses

Nomoto, K., Li, B., Gammer, C., Ceguerra, A. V., Bilal, H., Hohenwarter, A., Eckert, J., Gludovatz, B., Ringer, S. P. & Kruzic, J. J., 25 Apr 2022, In: Physical review materials . 6.2022, 4, 043603.

Research output: Contribution to journal › Article › Research › peer-review

Ca solubility in a BiFeO3‑based system with a secondary Bi2O3 phase on a nanoscale

Haselmann, U., Radlinger, T., Pei, W., Popov, M. N., Spitaler, T., Romaner, L., Ivanov, Y. P., Chen, J., He, Y., Kothleitner, G. & Zhang, Z., 21 Apr 2022, In: Journal of physical chemistry C (C, Nanomaterials and interfaces). 126.2022, 17, p. 7696-7703 8 p.

Research output: Contribution to journal › Article › Research › peer-review

Microstructural Impact on Fatigue Crack Growth Behavior of Alloy 718

Gruber, C., Raninger, P., Maierhofer, J., Gänser, H. P., Stanojevic, A., Hohenwarter, A. & Pippan, R., 21 Apr 2022, In: Metals. 12.2022, 5, 14 p., 710.

Research output: Contribution to journal › Article › Research › peer-review

Tuning mechanical properties of ultrafine-grained tungsten by manipulating grain boundary chemistry

Wurmshuber, M., Jakob, S., Doppermann, S., Wurster, S., Bodlos, R., Romaner, L., Maier-Kiener, V. & Kiener, D., 19 Apr 2022, (E-pub ahead of print) In: Acta materialia. 232.2022, 15 June, 13 p., 117939.

Research output: Contribution to journal › Article › Research › peer-review

Maximizing the degree of rejuvenation in metallic glasses

Yuan, X., Şopu, D., Spieckermann, F., Song, K. K., Ketov, S. V., Prashanth, K. G. & Eckert, J., 15 Apr 2022, In: Scripta Materialia. 212.2022, 15 April, 5 p., 114575.

Research output: Contribution to journal › Article › Research › peer-review

Thermal stress analysis and structural optimization of ladle nozzle based on finite element simulation

Rong, Z., Yi, J., Li, F., Liu, Y. & Eckert, J., 14 Apr 2022, In: Materials Research Express. 9.2022, 4, 15 p., 045601.

Research output: Contribution to journal › Article › Research › peer-review

Oxidation resistance of cathodic arc evaporated Cr0.74Ta0.26N coatings

Kainz, C., Saringer, C., Burtscher, M., Tkadletz, M., Stark, A., Schell, N., Pohler, M., Czettl, C., Kiener, D. & Schalk, N., 1 Apr 2022, In: Scripta materialia. 211.2022, 1 April, 5 p., 114492.

Research output: Contribution to journal › Article › Research › peer-review

Influence of grain aspect-ratio on the fracture properties of ultrafine-grained tantalum

Hohenwarter, A., Rockenschaub, M. & Renk, O., Apr 2022, In: Materials and Design. 216.2022, April, 11 p., 110545.

Research output: Contribution to journal › Article › Research › peer-review

The beneficial effect of rolling on the fracture toughness and R-curve behavior of pure tungsten

Firneis, D., Wurster, S., Nikolić, V., Pippan, R. & Hohenwarter, A., 24 Mar 2022, In: Materials Science and Engineering A. 838.2022, 24 March, 8 p., 142756.

Research output: Contribution to journal › Article › Research › peer-review

Manufacturing of Textured Bulk Fe-SmCo5 Magnets by Severe Plastic Deformation

Weissitsch, L., Stückler, M., Wurster, S., Todt, J., Knoll, P., Krenn, H., Pippan, R. & Bachmaier, A., 22 Mar 2022, In: Nanomaterials. 12.2022, 6, 10 p., 963.

Research output: Contribution to journal › Article › Research › peer-review

Reactive interdiffusion of an Al film and a CoCrFeNi high-entropy alloy

Zhang, Z., Ketov, S. V., Fellner, S., Sheng, H., Mitterer, C., Song, K. K., Gammer, C. & Eckert, J., 10 Mar 2022, In: Materials and Design. 216.2022, April, 8 p., 110530.

Research output: Contribution to journal › Article › Research › peer-review

Prospects of enhancing the understanding of material-hydrogen interaction by novel in-situ and in-operando methods

Massone, A. & Kiener, D., 26 Feb 2022, In: International Journal of Hydrogen Energy . 47.2022, 17, p. 10097-10111 15 p.

Research output: Contribution to journal › Review article › peer-review

Relaxation and Strain-Hardening Relationships in Highly Rejuvenated Metallic Glasses

Yuan, X., Şopu, D., Song, K. & Eckert, J., 24 Feb 2022, In: Materials. 15.2022, 5, 10 p., 1702.

Research output: Contribution to journal › Article › Research › peer-review

Impact of Si on the high-temperature oxidation of AlCr(Si)N coatings

Jäger, N., Meindlhumer, M., Zitek, M., Spor, S., Hruby, H., Nahif, F., Julin, J., Rosenthal, M., Keckes, J., Mitterer, C. & Daniel, R., 20 Feb 2022, In: JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY. 100.2022, 20 February, p. 91-100 10 p.

Research output: Contribution to journal › Article › Research › peer-review

Nanomaterials by severe plastic deformation: review of historical developments and recent advances

Edalati, K., Bachmaier, A., Beloshenko, V. A., Beygelzimer, Y., Blank, V. D., Botta, W. J., Bryła, K., Čížek, J., Divinski, S., Enikeev, N. A., Estrin, Y., Faraji, G., Figueiredo, R. B., Fuji, M., Furuta, T., Grosdidier, T., Gubicza, J., Hohenwarter, A., Horita, Z. & Huot, J. & 29 others, Ikoma, Y., Janeček, M., Kawasaki, M., Král, P., Kuramoto, S., Langdon, T. G., Leiva, D. R., Levitas, V. I., Mazilkin, A., Mito, M., Miyamoto, H., Nishizaki, T., Pippan, R., Popov, V. V., Popova, E. N., Purcek, G., Renk, O., Révész, Á., Sauvage, X., Sklenicka, V., Skrotzki, W., Straumal, B. B., Suwas, S., Toth, L. S., Tsuji, N., Valiev, R. Z., Wilde, G., Zehetbauer, M. J. & Zhu, X., 17 Feb 2022, (E-pub ahead of print) In: Materials Research Letters. 10.2022, 4, p. 163-256 94 p.

Research output: Contribution to journal › Review article › peer-review

Cracking mechanism in a laser powder bed fused cold-work tool steel: The role of residual stresses, microstructure and local elemental concentrations

Platl, J., Bodner, S. C., Hofer, C., Landefeld, A., Leitner, H., Turk, C., Nielsen, M.-A., Demir, A. G., Previtali, B., Keckes, J. & Schnitzer, R., 15 Feb 2022, In: Acta materialia. 225.2022, 15 February, 16 p., 117570.

Research output: Contribution to journal › Article › Research › peer-review

Fracture of severely plastically deformed titanium

Völker, B., Wurster, S., Pippan, R. & Hohenwarter, A., 15 Feb 2022, In: Materials letters. 309.2022, 15 February, 4 p., 131382.

Research output: Contribution to journal › Article › Research › peer-review

Synthesis, thermodynamic analysis and magnetic study of novel ball- milled Co₅₀Fe₂₅Ta₅Si₅C₁₅ glassy powders with high thermal stability

Taghvaei, A. H., Nickjeh, H. S., Ramasamy, P. & Eckert, J., 15 Feb 2022, In: Journal of alloys and compounds. 894.2022, 15 February, 12 p., 162509.

Research output: Contribution to journal › Article › Research › peer-review

Multilayer crystal-amorphous Pd-based nanosheets on Si/SiO₂ with interface-controlled ion transport for efficient hydrogen storage

Sarac, B., Ivanov, Y. P., Karazehir, T., Mühlbacher, M., Sarac, A. S., Greer, A. L. & Eckert, J., 1 Feb 2022, In: International Journal of Hydrogen Energy . 47.2022, 10, p. 6777-6788 12 p.

Research output: Contribution to journal › Article › Research › peer-review

Nanoindentation creep behavior of an Fe–Cr–Mo–B–C amorphous coating via atmospheric plasma spraying

Dong, Q., Tan, J., Huang, R., Wang, H., Song, P., Li, C. J., Feng, Z. X., Calin, M. & Eckert, J., Feb 2022, In: Intermetallics. 141.2022, February, 9 p., 107411.

Research output: Contribution to journal › Article › Research › peer-review