Chair of Materials Physics (430)

Organisational unit: Chair

101 - 150 out of 1,985Page size: 50

Research output

  1. 2023
  2. Published

    Nanoscale printed tunable specimen geometry enables high-throughput miniaturized fracture testing

    Jelinek, A., Žák, S., Cordill, M. J., Kiener, D. & Alfreider, M., Oct 2023, In: Materials and Design. 234.2023, October, 17 p., 112329.

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    The suitability of common reed (Phragmites australis) for load-bearing structural materials

    Albrecht, K., Neudecker, F., Veigel, S., Bodner, S., Keckes, J. & Gindl-Altmutter, W., Oct 2023, In: Journal of materials science. 58.2023, 39, p. 15411-15420 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  4. E-pub ahead of print

    Recent advances in nanomechanical and in situ testing techniques: Towards extreme conditions

    Kiener, D., Wurmshuber, M., Alfreider, M., Schaffar, G. J. K. & Maier-Kiener, V., 30 Sept 2023, (E-pub ahead of print) In: Current opinion in solid state & materials science. 27.2023, 6, 25 p., 101108.

    Research output: Contribution to journal › Article › Research › peer-review

  5. E-pub ahead of print

    Mapping strain across Co80Ta7B13 / Co62Ta6B32 glassy interfaces

    Evertz, S., Zalesak, J., Hans, M., Jansen, H. C., Keckes, J., Sheng, H., Eckert, J. & Gammer, C., 15 Sept 2023, (E-pub ahead of print) In: Materials and Design. 234.2023, October, 7 p., 112327.

    Research output: Contribution to journal › Article › Research › peer-review

  6. E-pub ahead of print

    Design of high-strength martensitic steels by novel mixed-metal nanoprecipitates for high toughness and suppressed hydrogen embrittlement

    Moshtaghi, M., Maawad, E., Bendo, A., Krause, A., Todt, J., Keckes, J. & Safyari, M., 14 Sept 2023, (E-pub ahead of print) In: Materials & design. 234.2023, October, 15 p., 112323.

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Measurement of residual stresses in surrogate coated nuclear fuel particles using ring-core focussed ion beam digital image correlation

    Leide, A. J., Haynes, T. A., Tzelepi, N., Payne, J., Jordan, M., Knol, S., Vreeling, J. A., Davies, M., Goddard, D. T., Pfeifenberger, M. J., Alfreider, M., Kiener, D. & Liu, D., Sept 2023, In: Nuclear Materials and Energy. 36.2023, September, 101470.

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Synergistic enhancement of hydrogen interactions in palladium-gold-silicon metallic glass on multilayered graphene

    Sarac, B., Ivanov, Y. P., Putz, B., Karazehir, T., Mitterer, C., Greer, A. L., Sarac, A. S. & Eckert, J., 16 Aug 2023, In: Journal of Materials Chemistry A. 11, p. 19396-19407

    Research output: Contribution to journal › Article › Research › peer-review

  9. E-pub ahead of print

    Ti40Zr10Cu36Pd14 bulk metallic glass as oral implant material

    Rezvan, A., Sharifikolouei, E., Soprunyuk, V., Schranz, W., Todt, J., Lassnig, A., Gammer, C., Sifferlinger, N. A., Asci, A., Okulov, I., Schlögl, S., Keckes, J., Najmi, Z., Cochis, A., Scalia, A. C., Rimondini, L., Sarac, B. & Eckert, J., 16 Aug 2023, (E-pub ahead of print) In: Materials and Design. 233.2023, 10 p., 112256.

    Research output: Contribution to journal › Article › Research › peer-review

  10. Accepted/In press

    The Influence of Phase Formation on Irradiation Tolerance in a Nanocrystalline TiZrNbHfTa Refractory High-Entropy Alloy

    Moschetti, M., Xu, A., Hohenwarter, A., Wei, T., Davis, J., Short, K., Thorogood, G. J., Kong, C., Couzinié, J.-P., Bhattacharyya, D., Kruzic, J. J. & Gludovatz, B. P., 9 Aug 2023, (Accepted/In press) In: Advanced Engineering Materials. 26.2024, 4, 11 p., 2300863.

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    Magnetic Properties of a High-Pressure Torsion Deformed Co-Zr Alloy

    Stückler, M., Wurster, S., Alfreider, M., Zawodzki, M., Krenn, H. & Bachmaier, A., 8 Aug 2023, In: Nanomaterials. 13.2023, 16, 10 p., 2280.

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    Short-range order patterns in Mg66Zn29Ca5 metallic glass: Phase transformations and crystallization kinetics

    Naghdali, S., Shabestari, S. G., Saghafian, H., Ramasamy, P., Spieckermann, F., Chen, Z., Zhang, Z. & Eckert, J., 1 Aug 2023, In: Journal of non-crystalline solids. 613.2023, 1 August, 10 p., 122390.

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Toxic element-free Ti-based metallic glass ribbons with precious metal additions

    Yüce, E., Spieckermann, F., Asci, A., Wurster, S., Ramasamy, P., Xi, L., Sarac, B. & Eckert, J., Aug 2023, In: Materials today advances. 19.2023, August, 11 p., 100392.

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Intragranular thermal fatigue of Cu thin films: Near-grain boundary hardening, strain localization and voiding

    Hlushko, K., Ziegelwanger, T., Reisinger, M., Todt, J., Meindlhumer, M., Beuer, S., Rommel, M., Greving, I., Flenner, S., Kopecek, J., Keckes, J., Detlefs, C. & Yildirim, C., 1 Jul 2023, In: Acta Materialia. 253.2023, 1 July, 10 p., 118961.

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Deformation and fatigue behaviour of additively manufactured Scalmalloy® with bimodal microstructure

    Schimbäck, D., Kaserer, L., Mair, P., Palm, F., Leichtfried, G. J., Pogatscher, S. & Hohenwarter, A., Jul 2023, In: International Journal of Fatigue. 172.2023, July, 14 p., 107592.

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Hydrogen Evolution Reaction on Ultra-Smooth Sputtered Nanocrystalline Ni Thin Films in Alkaline Media—From Intrinsic Activity to the Effects of Surface Oxidation

    Neumüller, D., Rafailović, L. D., Jovanović, A. Z., Skorodumova, N. V., Pašti, I. A., Lassnig, A., Grießer, T., Gammer, C. & Eckert, J., Jul 2023, In: Nanomaterials. 13.2023, 14, 18 p., 2085.

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    Effect of wire-arc directed energy deposition on the microstructural formation and age-hardening response of the Mg-9Al-1Zn (AZ91) alloy

    Graf, G., Spörk-Erdely, P., Maawad, E., Burtscher, M., Kiener, D., Clemens, H. & Klein, T., 30 Jun 2023, In: Journal of magnesium and alloys. 11.2023, 6, p. 1944-1958 15 p.

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Revealing dynamic-mechanical properties of precipitates in a nanostructured thin film using micromechanical spectroscopy

    Alfreider, M., Meindlhumer, M., Ziegelwanger, T., Daniel, R., Keckes, J. & Kiener, D., 25 Jun 2023, In: MRS Bulletin. 49.2024, 1, p. 49-58 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Manufacturing size effect on the structural and mechanical properties of additively manufactured Ti-6Al-4V microbeams

    Yin, K., Cao, B., Todt, J., Gutmann, F., Tunçay, H. F., Roth, A., Fischer, F., Grübel, N., Pfaff, A., Ganzenmüller, G. C., Keckes, J., Hiermaier, S. & Eberl, C., 20 Jun 2023, In: JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY. 149.2023, 20 June, p. 18-30 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Precious metal amorphous AgAuSi: Alloy design by swapping gold for silver

    Weniger, L.-M., Gammer, C., Niewczas, M., Cordill, M. J., Spieckermann, F., Djemia, P., Faurie, D., Li, C.-H., Lassnig, A., Terziyska, V., Mitterer, C., Eckert, J. & Glushko, O., 17 Jun 2023, In: Materials and Design. 232.2023, August, 11 p., 112099.

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    Fatigue life assessment of metal foils in multifunctional composites via combined experiments and simulations

    Trost, C. O. W., Žák, S., Ruderes, K., Hammer, R., Rosc, J., Krivec, T., Schell, N., Gänser, H.-P., Hohenwarter, A. & Cordill, M. J., 15 Jun 2023, In: Composites Part B: Engineering. 259.2023, 15 June, 110715.

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Crystal-Orientation-Dependent Oxygen Exchange Kinetics on Mixed Conducting Thin-Film Surfaces Investigated by In Situ Studies

    Siebenhofer, M., Riedl, C., Nenning, A., Raznjevic, S., Fellner, F., Artner, W., Zhang, Z., Rameshan, C., Fleig, J. & Kubicek, M., 13 Jun 2023, In: ACS Applied Energy Materials. 6.2023, 12, p. 6712-6720 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    In situ fragmentation of Al/Al2O3 multilayers on flexible substrates in biaxial tension

    Putz, B., Edwards, T. E. J., Huszar, E., Pethö, L., Kreiml, P., Cordill, M. J., Thiaudière, D., Chiroli, S., Faurie, D., Renault, P.-O. & Michler, J., 12 Jun 2023, In: Materials and Design. 232.2023, August, 15 p., 112081.

    Research output: Contribution to journal › Article › Research › peer-review

  24. E-pub ahead of print

    On the stability of Ti(Mn,Al)2 C14 Laves phase in an intermetallic Ti–42Al–5Mn alloy

    Graf, G., Seyffertitz, M., Spörk-Erdely, P., Clemens, H., Stark, A., Hatzenbichler, L., Holec, D., Burtscher, M., Kiener, D., Li, X. & Liu, K., 11 Jun 2023, (E-pub ahead of print) In: Intermetallics. 161.2023, October, 9 p., 107962.

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    Delignification and Densification as a Route to Enable the Use of Wheat Straw for Structural Materials

    Neudecker, F., Jakob, M., Bodner, S., Keckes, J., Buerstmayr, H. & Gindl-Altmutter, W., 4 May 2023, In: ACS Sustainable Chemistry and Engineering. 11.2023, 19, p. 7596-7604 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  26. E-pub ahead of print

    Lower hardness than strength: The auxetic composite microstructure of limpet tooth

    Wurmshuber, M., Wilmers, J., Kim, J., Oh, S. H., Bargmann, S. & Kiener, D., 29 Apr 2023, (E-pub ahead of print) In: Acta biomaterialia. 166.2023, August, p. 447-453 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  27. Published

    Effect of pulse-current-based protocols on the lithium dendrite formation and evolution in all-solid-state batteries

    Reisecker, V., Flatscher, F., Porz, L., Fincher, C., Todt, J., Hanghofer, I., Hennige, V., Linares-Moreau, M., Falcaro, P., Ganschow, S., Wenner, S., Chiang, Y. M., Keckes, J., Fleig, J. & Rettenwander, D., 27 Apr 2023, In: Nature Communications. 14.2023, 12 p., 2432.

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    Local gradients of microstructure and residual stresses in Si device sidewalls separated by laser dicing

    Ziegelwanger, T., Meindlhumer, M., Todt, J., Reisinger, M., Matoy, K. & Keckes, J., 24 Apr 2023.

    Research output: Contribution to conference › Poster › Research

  29. Published

    Microstructure formation and mechanical performance of micro-nanoscale ceramic reinforced aluminum matrix composites manufactured by laser powder bed fusion

    Xi, L., Feng, L., Gu, D., Prashanth, K. G., Kaban, I., Wang, R., Xiong, K., Sarac, B. & Eckert, J., 5 Apr 2023, In: Journal of alloys and compounds. 939.2023, 5 April, 12 p., 168803.

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    High-Throughput Micromechanical Testing Enabled by Optimized Direct Laser Writing

    Jelinek, A., Žák, S., Alfreider, M. & Kiener, D., 3 Apr 2023, In: Advanced engineering materials. 25.2023, 7, 10 p., 2200288.

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    Enhancement of hydrogen storage properties from amorphous Mg85Ni5Y10 alloy

    Zhou, H., Ding, Z., Chen, Y. A., Lan, Z., Guo, S., Spieckermann, F., Zadorozhnyy, V., Tan, J., Pan, F. & Eckert, J., 1 Apr 2023, In: Journal of non-crystalline solids. 605.2023, 1 April, 9 p., 122167.

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    Decomposition of CrN induced by laser-assisted atom probe tomography

    Waldl, H., Hans, M., Schiester, M., Primetzhofer, D., Burtscher, M., Schalk, N. & Tkadletz, M., Apr 2023, In: Ultramicroscopy. 246.2023, April, 8 p., 113673.

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    Strength determination for rough substrate-coating interfaces with three-dimensional defect structure

    Klünsner, T., Krobath, M., Konetschnik, R., Tritremmel, C., Maier-Kiener, V., Samardzic, D., Ecker, W., Czettl, C., Mitterer, C. & Kiener, D., Apr 2023, In: International journal of refractory metals & hard materials. 112.2023, April, 10 p., 106149.

    Research output: Contribution to journal › Article › Research › peer-review

  34. E-pub ahead of print

    Small-scale fracture mechanical investigations on grain boundary doped ultrafine-grained tungsten

    Wurmshuber, M., Alfreider, M., Wurster, S., Burtscher, M., Pippan, R. & Kiener, D., 28 Mar 2023, (E-pub ahead of print) In: Acta Materialia. 250.2023, 15 May, 12 p., 118878.

    Research output: Contribution to journal › Article › Research › peer-review

  35. E-pub ahead of print

    Fatigue crack growth behavior of a nanocrystalline low Young's modulus β-type Ti–Nb alloy

    Pillmeier, S., Pippan, R., Eckert, J. & Hohenwarter, A., 4 Mar 2023, (E-pub ahead of print) In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 871.2023, 26 April, 12 p., 144868.

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    Deformation Induced Structure and Property Changes in a Nanostructured Multiphase CrMnFeCoNi High-Entropy Alloy

    Schuh, B., Issa, I., Müller, T., Kremmer, T., Gammer, C., Pippan, R. & Hohenwarter, A., 2 Mar 2023, In: Nanomaterials. 13.2023, 5, 12 p., 924.

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    Effect of boron doping on grain boundary cohesion in technically pure molybdenum investigated via meso-scale three-point-bending tests

    Jakob, S., Hohenwarter, A., Lorich, A., Knabl, W., Pippan, R., Clemens, H. & Maier-Kiener, V., 2 Mar 2023, In: International journal of refractory metals & hard materials. 113.2023, June, 4 p., 106173.

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    In-situ transmission electron microscopy analysis of the degree of heterogeneities in a metallic glass

    Zhang, N. Z., Sun, K., Şopu, D., Spieckermann, F., Ma, X., Geng, C., Bian, X., Jia, Y., Wang, Q., Wang, G. & Eckert, J., Mar 2023, In: Intermetallics. 154.2023, March, 10 p., 107807.

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    Novel Structural and Functional Material Properties Enabled by Nanocomposite Design

    Eckert, J. (Editor) & Kiener, D. (Editor), Mar 2023, Multidisciplinary Digital Publishing Institute (MDPI).

    Research output: Book/Report › Book › Research

  40. E-pub ahead of print

    Microstructural influences on fatigue threshold behavior and fracture toughness of an additively manufactured γ-titanium aluminide

    Zeiler, S., Lintner, A., Schloffer, M., Pippan, R. & Hohenwarter, A., 22 Feb 2023, (E-pub ahead of print) In: Intermetallics. 156.2023, May, 9 p., 107852.

    Research output: Contribution to journal › Article › Research › peer-review

  41. Published

    Exploring the anneal hardening phenomenon in nanocrystalline Pt-Ru alloys

    Renk, O., Hohenwarter, A., Maier-Kiener, V. & Pippan, R., 15 Feb 2023, In: Journal of alloys and compounds. 935.2023, Part 1, 15 February, 11 p., 168005.

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    Probing the composition dependence of residual stress distribution in tungsten-titanium nanocrystalline thin films

    Sinojiya, R. J., Paulachan, P., Falah Chamasemani, F., Bodlos, R., Hammer, R., Zalesak, J., Reisinger, M., Scheiber, D., Keckes, J., Romaner, L. & Brunner, R., 15 Feb 2023, In: Communications materials. 2023, 4, 12 p., 11.

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    Analyse der Prozesskostenzusammensetzung bei der Herstellung additiv gefertigter, metallischer Bauteile in Kleinst- und Kleinserien durch pulverbettbasiertes Laserstrahlschmelzen

    Bodner, S. C., 12 Feb 2023, 103 p.

    Research output: Thesis › Master's Thesis

  44. E-pub ahead of print

    Inverse parameter determination for metal foils in multifunctional composites

    Trost, C. O. W., Krobath, M., Žák, S., Hammer, R., Krivec, T., Gänser, H.-P., Trost, T. W., Hohenwarter, A. & Cordill, M. J., 9 Feb 2023, (E-pub ahead of print) In: Materials and Design. 227.2023, March, 13 p., 111711.

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    Can Severe Plastic Deformation Tune Nanocrystallization in Fe-Based Metallic Glasses?

    Antoni, M., Spieckermann, F., Plutta, N., Gammer, C., Kapp, M., Ramasamy, P., Polak, C., Pippan, R., Zehetbauer, M. J. & Eckert, J., 1 Feb 2023, In: Materials. 16.2023, 3, 14 p., 1260.

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    Special Issue “Novel Structural and Functional Material Properties Enabled by Nanocomposite Design”

    Eckert, J. & Kiener, D., 1 Feb 2023, In: Nanomaterials. 13.2023, 3, 3 p., 586.

    Research output: Contribution to journal › Editorial › peer-review

  47. Published

    Enhancing mechanical properties of ultrafine-grained tungsten for fusion applications

    Wurmshuber, M., Doppermann, S., Wurster, S., Jakob, S., Balooch, M., Alfreider, M., Schmuck, K. S., Bodlos, R., Romaner, L., Hosemann, P., Clemens, H., Maier-Kiener, V. & Kiener, D., Feb 2023, In: International journal of refractory metals & hard materials. 111.2023, February, 7 p., 106125.

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    Novel Approach for Assessing Cyclic Thermomechanical Behavior of Multilayered Structures

    Seligmann, B., Alfreider, M., Wurmshuber, M. & Kiener, D., Feb 2023, In: Advanced engineering materials. 25.2023, 3, 10 p., 2201209.

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    Reactive interdiffusion of an Al film and a CoCrFeNi high-entropy alloy at elevated temperatures

    Zhang, Z.-Q., Fellner, S., Ketov, S. V., Cordill, M., Sheng, H., Mitterer, C., Song, K., Gammer, C. & Eckert, J., Feb 2023, In: Intermetallics. 153.2023, February, p. 1-11 11 p., 107797.

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    Investigation of the microstructure of a graded ZrN/Ti0.33Al0.67N multilayer coating using cross-sectional characterization methods

    Frank, F., Tkadletz, M., Saringer, C., Czettl, C., Pohler, M., Burghammer, M., Todt, J., Zalesak, J., Keckes, J. & Schalk, N., 25 Jan 2023, In: Surface & coatings technology. 453.2023, 25 January, 8 p., 129126.

    Research output: Contribution to journal › Article › Research › peer-review

  51. Published

    Micro-mechanisms of failure in nano-structured maraging steels characterised through in situ mechanical tests

    Jacob, K., Sahasrabuddhe, H., Hohenwarter, A., Dixit, S. & Jaya, B. N., 8 Jan 2023, In: Nanotechnology. 34.2023, 2, 025703.

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1 2 3 4 5 6 7 8 ...40 Next
View graph of relations

Contact information

Jahnstrasse 12/I, 8700 Leoben
  • Main phone number: +43 3842 804 112