Chair of Ferrous Metallurgy (220)
Organisational unit: Chair
Research output
- 2017
- Published
Thermodynamische Untersuchung der Fe-Ecke des Fe-C-Si-Mn Systems
Romankiewicz, M., 2017Research output: Thesis › Master's Thesis
- Published
Untersuchungen des Ausscheidungsverhaltens von H-Karbiden in einer kohlenstoffhaltigen TiAl Legierung mittels in- und ex-situ Experimenten
Burtscher, M., Kirchheimer, K., Weißensteiner, I., Bernhard, C., Lederhaas, B., Klein, T., Mayer, S. & Clemens, H., 2017, Praktische Metallographie Sonderband 51. p. 55-60Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
Untersuchungen zur Fehlerquellenidentifikation an Stahlproben durch Nutzung des SILENOS-Prüfsystems
Klußmann, Z., 2017Research output: Thesis › Master's Thesis
- Published
Untersuchung zur Optimierung von Schweißschlacken für das Lichtbogenhandschweißen mit Fülldrahtelektrode
Mayer, P. M., 2017Research output: Thesis › Master's Thesis
- 2016
- Published
A new method for the experimental simulation of surface crack formation in continuous casting
Krobath, R., Bernhard, C., Ilie, S., Six, J. & Hahn, S., 1 Dec 2016.Research output: Contribution to conference › Presentation › Research › peer-review
- Published
HT-LSCM - A valuable tool for surface microstructure investigations
Fuchs, N., Krobath, R., Bernhard, C., Ilie, S. & Xia, G., 1 Dec 2016.Research output: Contribution to conference › Presentation › Research › peer-review
- Published
Experimental Simulation of the Interaction of Slag and Hot Metal with Coke at the Bosh Region of Blast Furnace
Bhattacharyya, A., Schenk, J., Jäger, M., Stocker, H. & Thaler, C., Dec 2016, In: Berg- und hüttenmännische Monatshefte : BHM. p. 1-6Research output: Contribution to journal › Article › Research
- Published
Evaluation of the Potential for Reduction of CO2 Emissions at the Secondary Metallurgy
Gerasev, A., Bundschuh, P., Schenk, J., Viertauer, A., Trummer, B., Arth, G., Rössler, R. & Reisinger, P., 1 Nov 2016, In: RHI bulletin : the journal of refractory innovations. 2016, 1, p. 28-34 7 p.Research output: Contribution to journal › Article › Research
- Published
Thermodynamische Modellierung der Schlackenfahrweise in der Sekundärmetallurgie
Penz, F., Bundschuh, P., Griessacher, T. & Schenk, J., 13 Oct 2016, Schlacken-Symposium 2016: Kreislaufwirtschaft stabil weiter entwickeln. p. 153-166 14 p.Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
Hydrogen as Reducing Agent in Ironmaking and Steemaking - Status, Potentials, Challenges
Schenk, J., 4 Oct 2016.Research output: Contribution to conference › Presentation › Research
- Published
Austenite grain growth investigated by complementary in-situ techniques
Gamsjäger, E., Tichauer, W., Lederhaas, B., Garcin, T. & Militzer, M., 28 Sept 2016.Research output: Contribution to conference › Presentation › Research › peer-review
- Published
ANALYSIS OF THE ALKALI DISTRIBUTION IN IRONMAKING REACTORS BY THERMOCHEMICAL MODELLING
Pichler, A., Schenk, J., Hauzenberger, F., Stocker, H. & Thaler, C., Sept 2016, 7TH EUROPEAN COKE AND IRONMAKING CONGRESS - ECIC 2016, Proceedings.Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
EVALUATION OF THE CAPABILITIES OF DIRECT AND SMELTING REDUCTION PROCESSES TO ENHANCE THE ENERGY EFFICIENCY AND TO REDUCE THE CO2 EMISSION OF THE STEEL PRODUCTION IN EUROPE
Schenk, J. & Lüngen, H.-B., Sept 2016, 7TH EUROPEAN COKE AND IRONMAKING CONGRESS - ECIC 2016, Proceedings. LinzResearch output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
Experimental Simulation of the Interaction of Slag and Hot Metal with Coke at the Bosh Region of Blast Furnace
Bhattacharyya, A., Schenk, J., Jäger, M., Stocker, H. & Thaler, C., Sept 2016, 7th European Coke and Ironmaking Conference Proceedings.Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
In-situ Beobachtung des Verhaltens nichtmetallischer Einschlüsse mittels Hochtemperatur- Laser-Scanning- Konfokalmikroskopie
Michelic, S. K., Dieguez Salgado, U., Loder, D. & Bernhard, C., Sept 2016, In: Giesserei-Praxis. 67.2016, 9, p. 337-340 4 p.Research output: Contribution to journal › Article › Research › peer-review
- Published
Experimental und numerical investigations on cooling efficiency of Air-Mist nozzles on steel during continuous casting
Arth, G., Taferner, M., Bernhard, C. & Michelic, S. C., 10 Aug 2016, In: IOP Conference Series: Materials Science and Engineering. 143.2016, 1, 9 p., 012033.Research output: Contribution to journal › Article › Research › peer-review
- Published
Formation of shrinkage porosity during solidification of steel: Numerical simulation and experimental validation
Riedler, M., Michelic, S. K. & Bernhard, C., 10 Aug 2016, In: IOP Conference Series: Materials Science and Engineering. 143.2016, 1, 9 p., 012035.Research output: Contribution to journal › Article › Research › peer-review
- Published
Metallurgical approach of development of a hot crack resistant metal-cored wire
Stein, H., Schnitzer, R., Posch, G., Bruckner, J. & Presoly, P., Jul 2016.Research output: Contribution to conference › Presentation › Research
- Published
Microsegregation Model with Local Equilibrium Partition Coefficients During Solidification of Steels
You, D., Bernhard, C., Wieser, G. & Michelic, S., Jul 2016, In: Steel research international. 87.2016, 7, p. 840-849 10 p.Research output: Contribution to journal › Article › Research › peer-review
- Published
Systematische Untersuchung der Azikularferritbildung in Stählen
Loder, D., Michelic, S. K. & Bernhard, C., 28 Jun 2016, In: Berg- und hüttenmännische Monatshefte : BHM. 161.2016, 7, p. 315-320 6 p.Research output: Contribution to journal › Article › Research › peer-review
