Chair of Ferrous Metallurgy (220)

Organisational unit: Chair

551 - 600 out of 1,066Page size: 50

Research output

  1. 2014
  2. Published

    Entwicklung von Stahl-Keramik-Verbunden mit verminderter Dichte

    Arth, G., Bernhard, C., Samek, L. & Samoilov, A., 2014, Forum für Metallurgie und Werkstofftechnik 2014 mit Zukunftskonferenz. p. xx-xx

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  3. Published

    Experimental study on the formation of non-metallic inclusions acting as nuclei for acicular ferrite in HSLA steels through specific deoxidation practice and defined cooling conditions

    Michelic, S., Loder, D., Arth, G. & Bernhard, C., 2014, Materials Science Forum: Proceedings THERMEC 2013. Vol. 783-786. p. 1079-1084

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  4. Published

    Experimental und numerical investigations on hot tearing during continuous casting of steel

    Arth, G., Bernhard, C., Ilie, S., Schaden, T. & Pierer, R., 2014, Conference Proceedings of the 8th ECCC. p. 1-8

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  5. Published

    Experimentelle Simulation der Oberflächenrissbildung

    Krajewski, P. & Krobath, R., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  6. Published

    Experimentelle Simulation der Oberflächenrissbildung beim Stranggießprozess mit Hilfe des IMC-B Versuchs

    Krajewski, P., Bernhard, C., Krobath, R., Schaden, T. & Ilie, S., 2014, In: Berg- und hüttenmännische Monatshefte : BHM. 159, p. 304-305

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Identification of peritectic steel grades by thermal mould monitoring and DSC measurements

    Presoly, P., Bernhard, C. & Xia, G., 2014, Proceedings of the 8th European Continuous Casting Conference. p. x-y

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  8. Published

    Image analysis for evaluation of iron ore carriers

    Kain-Bückner, B., Mali, H., Schenk, J., Hanel, M., Thaler, C., Stocker, H. & Hauzenberger, F., 2014, Sonderbände der Praktischen Metallographie 46. p. 215-218

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  9. Published

    IMC-B - a new experimental method to predict the crack susceptiblity under continuous casting conditions

    Krajewski, P., Bernhard, C., Krobath, R., Schaden, T. & Ilie, S., 2014, 1st ESTAD &31st JSI. p. 184-185

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  10. Published

    Influence of alkalis on mechanical properties of lumpy iron carriers during reduction

    Pichler, A., Schenk, J., Hanel, M., Mali, H., Thaler, C., Hauzenberger, F. & Stocker, H., 2014, Conference Proceedings to the 23rd International Conference on Metallurgy and Materials. p. 40-40

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  11. Published

    Influence of CaO dissolution on the kinetics of metallurgical reactions in BOF-process

    Bundschuh, P., Schenk, J., Hiebler, M., Panhofer, H. & Sormann, A., 2014, Influence of CaO dissolution on the kinetics of metallurgical reactions in BOF-process. p. 89-100

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  12. Published

    Influence of thin slab thickness on final strip property in Arvedi ESP plant

    Linzer, B., Watzinger, J., Bragin, S., Bernhard, C. & Bianchi, A., 2014, 8th European Continuous Casting Conference. p. 1-8

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  13. Published

    In situ observation of acicular ferrite formation using HT-LSCM: possibilities, challenges and influencing factors

    Loder, D., Michelic, S., Mayerhofer, A., Bernhard, C. & Dippenaar, R., 2014, Proceedings of MS&T14 . p. 469-476

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  14. Published

    In-situ observation of the dissolution of SiO2 particles in CaO-Al2O3-SiO2 slags and mathematical analysis of its dissolution pattern

    Feichtinger, S., Michelic, S., Kang, Y.-B. & Bernhard, C., 2014, In: Journal of the American Chemical Society. 97, p. 316-325

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Kornfeinung hochlegierter Stähle durch heterogene Keimbildung

    Koloszar, R., 2014

    Research output: Thesis › Master's Thesis

  16. Published

    Preparation, reduction and melting of manganese containing iron ore pellets

    Hanel, M., 2014

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  17. Published

    Process behaviour of fine iron ores during reduction in a fluidized bed reactor and characterization of the morphological evolution

    Pichler, A., 2014,

    Proceedings of the 1st ESTAD & 31 JSI Conference

    .     p. 100-102

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  18. Published

    Reducibility of a Hematitic Lump Ore at different near Blast Furnace Conditions

    Hanel, M., Schenk, J., Mali, H., Hauzenberger, F., Thaler, C. & Stocker, H., 2014, 1st ESTAD & 31st JSI . p. 1-2

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  19. Published

    Solidification Modeling on Bloom Casters - Different Methods of Result Verification and Their Application

    Michelic, S., Pierer, R. & Riedler, M., 2014.

    Research output: Contribution to conference › Presentation › Research

  20. Published

    Thermochemical Calculation of the Quaternary CaO–SiO2–Al2O3–MgO System at 1600°C for Predicting the MgO-Saturation and MgO–MgO · Al2O3 Equilibrium of Secondary Metallurgical Slag

    Goriupp, J., Schenk, J., Klösch, G. & Hiebler, M., 2014, In: Steel research international. 85, p. 564-569

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    Thermodynamic and Kinetic Model of the Converter Steelmaking Process. Part 1: The Description of the BOF Model

    Lytvynyuk, Y., Schenk, J., Hiebler, M. & Sormann, A., 2014, In: Steel research international. 85, p. 537-543

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Thermodynamic and Kinetic Model of the Converter Steelmaking Process. Part 2: The Model Validation

    Lytvynyuk, Y., Schenk, J., Hiebler, M. & Sormann, A., 2014, In: Steel research international. 85, p. 544-563

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    The Use of HT-LSCM for the In Situ Observation of Acicular Ferrite

    Loder, D., Michelic, S. & Bernhard, C., 2014.

    Research output: Contribution to conference › Poster › Research

  24. Published

    Untersuchung der Nutzbarkeit von OES-PDA Daten zur Bewertung des Einflusses verschiedener sekundärmetallurgischer Parameter auf die Stahlreinheit

    Dorrer, P., 2014

    Research output: Thesis › Master's Thesis

  25. Published

    Untersuchung der Wirkung von Legierungselementen auf die peritektische Phasenumwandlung in Stählen

    Presoly, P., 2014

    Research output: Thesis › Doctoral Thesis

  26. Published

    Vergleichsstudie martensitischer korrosionsbeständiger Stähle

    Gröblinger, H. H., 2014, 108 p.

    Research output: Thesis › Master's Thesis

  27. Published

    Werkstoff- und Planheitsuntersuchungen von wärmebehandelten Stahlbändern

    Glaser, G. M., 2014, 128 p.

    Research output: Thesis › Master's Thesis

  28. 2013
  29. Published

    Application of Thermodynamic and Kinetic Model for Converter Steelmaking to Optimize Manganese Yield in Crude Steel

    Lytvynyuk, Y., Schenk, J., Hiebler, M., Mizelli, H. & Sormann, A., 2013, In: Berg- und hüttenmännische Monatshefte : BHM. p. 457-458

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    ARVEDI ESP PROCESS – AN ULTIMATE TECHNOLOGY CONNECTING CASTING AND ROLLING IN ENDLESS MODE

    Bragin, S., Rimnac, A., Linzer, B., Bianchi, A., Mantova, A., Rizzi, A. & Bernhard, C., 2013, Rolling 2013. p. 1-13

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  31. Published

    Aufheizverhalten von Hot Briquetted Iron unter Stickstoffatmosphäre

    Bundschuh, P., 2013

    Research output: Thesis › Master's Thesis

  32. Published

    Characterization of burden material for ironmaking by means of reduction tests with morphological characterization

    Hanel, M., Mali, H., Thaler, C., Stocker, H., Hauzenberger, F., Skorianz, M. & Schenk, J., 2013, The ISIJ-VDEh-Jernkontoret Joint Symposium. p. 145-153

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  33. Published

    Characterization of Different Lump Ore Brands According to Industrial Scale Process Conditions by Means of Reducibility Testing and Morphological Investigation

    Hanel, M., Skorianz, M., Schenk, J., Mali, H., Hauzenberger, F., Stocker, H. & Thaler, C., 2013, AISTech 2013 Proceedings. p. 447-456

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  34. Published

    Charakterisierung von Rohmaterialien für die Eisenerzherstellung mit Bildverarbeitung

    Hanel, M., Kain-Bückner, B., Schenk, J., Hauzenberger, F., Stocker, H. & Thaler, C., 2013, In: Berg- und hüttenmännische Monatshefte : BHM. 158, p. 445-446

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Comparison of morphology of sulfides in free cutting non-quenched and tempered steel

    You, D., Yue, F., Huajie, W. U., Cui, H., Tian, E. & Wang, Z., 2013, 宝钢学术年会.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  36. Published

    Comprehensive Investigations of new Filler Materials for Welding of High Strength Steels

    Schnitzer, R., Rauch, R., Ernst, W., Wagner, J., Baumgartner, S., Leitner, M., Stoschka, M., Schlagradl, T., Schneider, R. & Bernhard, C., 2013, Proceedings of the 3rd International Conference. p. 323-332

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  37. Published

    Das Auflösungsverhalte von Al2O3 und MgO*Al2O3 Partikeln mit definierter Oberfläche in hoch MgO-hätligen sekundärmetallurgischen Pfannenschlacken

    Goriupp, J. & Schenk, J., 2013, In: Berg- und hüttenmännische Monatshefte : BHM. p. 468-469

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    Effectiveness of improvised gas absorption techniques for emergency responders at releases of toxic gases

    Kern, H., Taferner, M. & Raupenstrauch, H., 2013, 2013 AIChE Spring Meeting & 9th Global Congress on Process Safety. p. 1-2

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  39. Published

    Effectiveness of improvised gas absorption techniques for emergency responders at releases of toxic gases

    Kern, H., Taferner, M. & Raupenstrauch, H., 2013, 28th Center for Chemical Process Safety International Conference 2013, CCPS - Topical Conference at the 2013 AIChE Spring Meeting and 9th Global Congress on Process Safety. p. 1022-1028 7 p. (28th Center for Chemical Process Safety International Conference 2013, CCPS - Topical Conference at the 2013 AIChE Spring Meeting and 9th Global Congress on Process Safety; vol. 2).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  40. Published

    Effect of titanium on the solidification and postsolidification microstructure of high-strength steel welds

    Vanovsek, W., Bernhard, C., Fiedler, M. & Schnitzer, R., 2013, In: Welding in the world. 57, p. 665-674

    Research output: Contribution to journal › Article › Research › peer-review

  41. Published

    Enhancement of Efficiency in Crude Iron Production Using an Increased Amount of Pellet Feed

    Schmidt, L., Köpplmayr, D., Plaul, F. & Schenk, J., 2013, In: Berg- und hüttenmännische Monatshefte : BHM. 158, p. 449-450

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    Entwicklung von Stahl-Keramik Verbunden mit verminderter Dichte

    Arth, G., 2013, 1 p.

    Research output: Thesis › Doctoral Thesis

  43. Published

    Etching Methods for the Computerized Analysis of Acicular Ferrite in Steel Microstructures

    Loder, D., Michelic, S. & Bernhard, C., 2013.

    Research output: Contribution to conference › Poster › Research

  44. Published

    Experimentelle Simulation der Rissbildung im Temperaturbereich des zweiten Duktilitätsminimums von Stählen

    Krajewski, P., 2013, 193 p.

    Research output: Thesis › Doctoral Thesis

  45. Published

    Identification of Defect Prone Peritectic Steel Grades by Analyzing High-Temperature Phase Transformations

    Presoly, P., Bernhard, C. & Pierer, R., 2013, In: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 44, p. 5377-5388

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    IMC-B – Ein neuer Ansatz zur Untersuchung der Oberflächenheissrissbildung im Stranggießprozess

    Krajewski, P., Bernhard, C., Krobath, R., Schaden, T. & Ilie, S., 2013, In: Berg- und hüttenmännische Monatshefte : BHM.

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    IMC-B – ein neuer Ansatz zur Untersuchung der Oberflächenrissbildung im Stranggießprozess

    Krajewski, P., Bernhard, C., Pierer, R., Schneller, F. & Schaden, T., 2013, In: Berg- und hüttenmännische Monatshefte : BHM. p. 108-115

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    Inclusion Removal and Modification in Remelting Processes with Special Regard to Inclusion Dissolution in CaO-Al2O3-CaF2 Slags

    Michelic, S., Schider, S. & Bernhard, C., 2013,

    INTECO Melting, Refining, Casting & Remelting Symposium 2013 - Proceedings

    .     p. 172-184

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  49. Published

    Influence of aluminium content on the characterization of microstructure and inclusions in high-strength steel welds

    Vanovsek, W., Bernhard, C., Fiedler, M. S. & Posch, G., 2013, In: Welding in the world. 57, p. 73-83

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    Influence of aluminum content on the characterization of microstructure and inclusions in high-strength steel welds

    Vanovsek, W., Bernhard, C., Fiedler, M. & Posch, G., 2013, In: Welding in the world. 57, p. 73-83

    Research output: Contribution to journal › Article › Research › peer-review

  51. Published

    In-situ Beobachtung von Phasenumandlungen in Stählen

    Schider, S., Gamsjäger, E., Michelic, S. & Bernhard, C., 2013, Prakt. Met. Sonderband 45. p. 139-144

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  52. Published

    In-situ study of the dissolution of SiO2 inclusions in secondary steelmaking slags for the production of steel wire

    Feichtinger, S., 2013, 89 p.

    Research output: Thesis › Master's Thesis

Previous 1...8 9 10 11 12 13 14 15 ...22 Next
View graph of relations

Contact information

Franz-Josef-Strasse 18, 8700 Leoben
  • Main phone number: +43 3842 402 2201