Chair of Drilling and Completion Engineering (590)

Organisational unit: Chair

131 - 140 out of 363Page size: 10

Sort by: 1st author

Research output

Published
Differential Stuck Pipe Events – Development of Digital Best Practices for NPT Prevention
Ortner, A., 2020
Research output: Thesis › Master's Thesis
Published
SmartLearn – A concept of Using Machine Learning Algorithms to Automatically Capture and Apply “Lessons Learnt” During the Whole Construction Process to Mitigate NPT and Enhance Operational Efficiency
Olkhovikov, A., 2020
Research output: Thesis › Master's Thesis
Published
Assessment of an Innovative Compressor Design
Niederseer, C., 2014, 134 p.
Research output: Thesis › Master's Thesis
Published
Level 3 Casing Drilling in a Mature Field Environment
Ndiga Ngue, J. P., 2018
Research output: Thesis › Master's Thesis
Published
An Interdisciplinary Approach to Investigate the Cement Integrity for Underground Hydrogen Storage Wells
Nasiri, A., Ravi, K., Prohaska-Marchried, M., Feichter, M., Raith, J. & Pruno, S., 5 Jun 2023, SPE EuropEC - Europe Energy Conference featured at the 84th EAGE Annual Conference & Exhibition. 29 p. SPE-214423-MS
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Single energy Micro-computed tomography(µCT): A reliable potential alternative to mineral Investigation of formation rock
Nasiri, A., 26 May 2023.
Research output: Contribution to conference › Poster › Research › peer-review
Published
Drilling fluid: a stochastic ROP optimization approach for the Brazilian pre-salt carbonates
Nascimento, A., 2012, 98 p.
Research output: Thesis › Master's Thesis
Published
Permeability prediction of un-cored intervals using new IMLR method and artificial neural networks: A case study of Bangestan field, Iran
Naeeni, M. N., Zargari, H., Ashena, R., Ashena, R. & Kharrat, R., 2010, Society of Petroleum Engineers - Nigeria Annual International Conference and Exhibition 2010, NAICE. p. 882-890 9 p. (Society of Petroleum Engineers - Nigeria Annual International Conference and Exhibition 2010, NAICE; vol. 2).
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Development of an Energy Consumption Model Based on Standard Drilling Parameters
Müller, G. G., 2015, 81 p.
Research output: Thesis › Master's Thesis
Published
Results of Simultaneous Fluid Logging Measurements in the Area of Wildbad Einöd (Styria, Austria)
Müller, E., 2012.
Research output: Contribution to conference › Poster › Research › peer-review

Previous 1...10 11 12 13 14 15 16 17 ...37 Next

Research Portal

Chair of Drilling and Completion Engineering (590)

Research output

Differential Stuck Pipe Events – Development of Digital Best Practices for NPT Prevention

SmartLearn – A concept of Using Machine Learning Algorithms to Automatically Capture and Apply “Lessons Learnt” During the Whole Construction Process to Mitigate NPT and Enhance Operational Efficiency

Assessment of an Innovative Compressor Design

Level 3 Casing Drilling in a Mature Field Environment

An Interdisciplinary Approach to Investigate the Cement Integrity for Underground Hydrogen Storage Wells

Single energy Micro-computed tomography(µCT): A reliable potential alternative to mineral Investigation of formation rock

Drilling fluid: a stochastic ROP optimization approach for the Brazilian pre-salt carbonates

Permeability prediction of un-cored intervals using new IMLR method and artificial neural networks: A case study of Bangestan field, Iran

Development of an Energy Consumption Model Based on Standard Drilling Parameters

Results of Simultaneous Fluid Logging Measurements in the Area of Wildbad Einöd (Styria, Austria)

Contact information