Materials science and engineering: A, Structural materials: properties, microstructure and processing, ‎0921-5093

Journal

ISSNs0921-5093
Additional searchable ISSN (electronic)1873-4936
1 - 175 out of 175Page size: 500

Research output

  1. 2024
  2. Published

    Microscopic fracture toughness of notched porous sintered Cu micro-cantilevers for power electronics packaging

    Hu, D., Du, L., Alfreider, M., Fan, J., Kiener, D. & Zhang, G., 7 Apr 2024, In: Materials Science and Engineering: A. 897.2024, April, 10 p., 146316.

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    Effect of intercritical annealing on the microstructure and mechanical properties of a PH 13-8 Mo maraging steel

    Rosenauer, A., Teusl, S., Landefeld, A., Brandl, D., Ressel, G., Hönigmann, T., Stadler, M., Turk, C., Maawad, E. & Stockinger, M., 2024, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 2024, 895, p. 1-13

    Research output: Contribution to journal › Article › Research › peer-review

  4. 2023
  5. Published

    Deformation and failure behavior of nanocrystalline WCu

    Burtscher, M., Alfreider, M., Kainz, C. & Kiener, D., 6 Nov 2023, In: Materials Science and Engineering A. 887.2023, 6 November, 9 p., 145760.

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    In-situ microscopy methods for imaging high-temperature microstructural processes – Exploring the differences and gaining new potentials

    Lumper, L., Schaffar, G. J. K., Sommerauer, M. & Maier-Kiener, V., 6 Nov 2023, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 887.2023, 6 November, 9 p., 145738.

    Research output: Contribution to journal › Article › Research › peer-review

  7. E-pub ahead of print

    Decoupling electroplasticity by temporal coordination design of pulse current loading and straining

    Li, H., Jin, F., Zhang, M., Ding, J., Bian, T., LI, J., Ma, J., Zhang, L. & Wang, Y., 10 Jul 2023, (E-pub ahead of print) In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 881.2023, 10 August, 17 p., 145435.

    Research output: Contribution to journal › Article › Research › peer-review

  8. Orientation dependence of the effect of short-range ordering on the plastic deformation of a medium entropy alloy

    Picak, S., Singh, P., Salas, D., Fang, X., Tunes, M., Zhou, L., Kramer, M. J., Chumlyakov, Y. I., Johnson, D. D., Arróyave, R., Ren, Y. & Karaman, I., 22 Jun 2023, (E-pub ahead of print) In: Materials Science and Engineering: A. 888.2023, 17 November, 11 p., 145309.

    Research output: Contribution to journal › Article › Research › peer-review

  9. E-pub ahead of print

    Fatigue crack growth behavior of a nanocrystalline low Young's modulus β-type Ti–Nb alloy

    Pillmeier, S., Pippan, R., Eckert, J. & Hohenwarter, A., 4 Mar 2023, (E-pub ahead of print) In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 871.2023, 26 April, 12 p., 144868.

    Research output: Contribution to journal › Article › Research › peer-review

  10. E-pub ahead of print

    Effect of integrated austempering and Q&P treatment on the transformation kinetics, microstructure and mechanical properties of a medium-carbon steel

    Liu, M., Hu, H., Kern, M., Lederhaas, B., Xu, G. & Bernhard, C., 15 Feb 2023, (E-pub ahead of print) In: Materials Science and Engineering A. 869.2023, 24 March, 12 p., 144780.

    Research output: Contribution to journal › Article › Research › peer-review

  11. 2022
  12. Published

    The role of alloying elements in NiAl and Ni3Ti strengthened Co-free maraging steels

    Zeisl, S., Landefeld, A., Van Steenberge, N., Chang, Y. & Schnitzer, R., 9 Nov 2022, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 861.2022, 19 December, 9 p., 144313.

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Mechanical performance of doped W–Cu nanocomposites

    Wurmshuber, M., Burtscher, M., Doppermann, S., Bodlos, R., Scheiber, D., Romaner, L. & Kiener, D., 1 Nov 2022, In: Materials Science and Engineering A. 857.2022, 1 November, 12 p., 144102.

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Designing lightweight multicomponent magnesium alloys with exceptional strength and high stiffness

    Gu, Z., Zhou, Y., Dong, Q., He, G., Cui, J., Tan, J., Chen, X., Jiang, B., Pan, F. & Eckert, J., 10 Oct 2022, In: Materials Science and Engineering A. 855.2022, 10 October, 10 p., 143901.

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Enhancement in strength and thermal stability of selective laser melted Al–12Si by introducing titanium nanoparticles

    Qi, J., Liu, C. Y., Chen, Z. W., Liu, Z. Y., Tian, J. S., Feng, J., Okulov, I. V., Eckert, J. & Wang, P., 10 Oct 2022, In: Materials Science and Engineering A. 855.2022, 10 October, 12 p., 143833.

    Research output: Contribution to journal › Article › Research › peer-review

  16. E-pub ahead of print

    Closed die forging of a Mg-Al-Ca-Mn-Zn lean alloy

    Papenberg, N. P., Arnoldt, A., Trink, B., Uggowitzer, P. & Pogatscher, S., 23 Sept 2022, (E-pub ahead of print) In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 2022, 857, 22 p., 144079.

    Research output: Contribution to journal › Article › Research › peer-review

  17. E-pub ahead of print

    Influence of delta ferrite on the impact toughness of a PH 13-8 Mo maraging steel

    Rosenauer, A., Brandl, D., Ressel, G., Lukas, S., Monschein, S., Stockinger, M. & Schnitzer, R., 19 Sept 2022, (E-pub ahead of print) In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 856.2022, 20 October, 11 p., 144024.

    Research output: Contribution to journal › Article › Research › peer-review

  18. E-pub ahead of print

    Elucidating dynamic precipitation and yield strength of rolled Mg-Al-Ca-Mn alloy

    LI, J., Zhou, X., Su, J., Breitbach, B., Chwałek, M. L., Wang, H. & Dehm, G., 14 Sept 2022, (E-pub ahead of print) In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 856.2022, 20 October, 17 p., 143898.

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Combined thermal desorption spectroscopy, hydrogen visualization, HRTEM and EBSD investigation of a Ni–Fe–Cr alloy: The role of hydrogen trapping behavior in hydrogen-assisted fracture

    Moshtaghi, M., Safyari, M. & Mori, G. K., 19 Jul 2022, In: Materials Science and Engineering A. 848.2022, 19 July, 10 p., 143428.

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Effect of post weld heat treatment on the interplay of microstructure, precipitates and properties of creep-resistant 2.25Cr-1Mo-0.25V weld metal

    Fleißner-Rieger, H., Musi, M., Albu, M., Krein, R. & Schnitzer, R., 5 Jul 2022, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 850.2022, 11 August, 11 p., 143550.

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    Ultrasound-assisted dispersion of TiB2 nanoparticles in 7075 matrix hybrid composites

    Wu, Y., Liu, B., Kang, H., Guo, E., LI, J., Du, G. & Wang, T., 18 Apr 2022, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 840.2022, 18 April, 9 p., 142958.

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    The beneficial effect of rolling on the fracture toughness and R-curve behavior of pure tungsten

    Firneis, D., Wurster, S., Nikolić, V., Pippan, R. & Hohenwarter, A., 24 Mar 2022, In: Materials Science and Engineering A. 838.2022, 24 March, 8 p., 142756.

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Precipitation behavior of a Co-free Fe-Ni-Cr-Mo-Ti-Al maraging steel after severe plastic deformation

    Zeisl, S., Lassnig, A., Hohenwarter, A. & Mendez Martin, F., 26 Jan 2022, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 833.2022, 26 January, 9 p., 142416.

    Research output: Contribution to journal › Article › Research › peer-review

  24. 2021
  25. E-pub ahead of print

    Development of segregations in a Mg–Mn–Nd alloy during HPT processing

    de Oliveira, P. C., Montoro, L. A., Perez-Prado, M. T., Hohenwarter, A., Figueiredo, R. B. & Isaac, A., 23 Oct 2021, (E-pub ahead of print) In: Materials Science and Engineering A. 802.2021, 20 January, 140423.

    Research output: Contribution to journal › Article › Research › peer-review

  26. E-pub ahead of print

    Influence of high pressure torsion on microstructure evolution and mechanical properties of AZ80/SiC magnesium matrix composites

    Akbaripanah, F., Sabbaghian, M., Fakhar, N., Khaleghi, A. A., Minárik, P., Veselý, J., Hung, P. T., Kapoor, G., Renk, O., Máthis, K., Gubicza, J. & Eckert, J., 20 Aug 2021, (E-pub ahead of print) In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 826.2021, 5 October, 11 p., 141916.

    Research output: Contribution to journal › Article › Research › peer-review

  27. Published

    Copper and its effects on microstructure and correlated tensile properties of super duplex stainless steels

    Ressel, G., Gsellmann, M., Brandl, D., Landefeld, A., Keplinger, A., Zhang, Z., Maier-Kiener, V. & Schnitzer, R., 21 Jul 2021, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 821, 821, p. 1-11 141544.

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    Microstructure and mechanical properties of partially ferritic Q&P steels

    Kickinger, C., Suppan, C., Hebesberger, T., Schnitzer, R. & Hofer, C., 20 May 2021, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 815.2021, 20 May, 11 p., 141296.

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    Influence of cold rolling on the fatigue crack growth behavior of tungsten

    Pillmeier, S., Žák, S., Pippan, R. & Hohenwarter, A., 23 Feb 2021, In: Materials Science and Engineering A. 805.2021, 23 February, 12 p., 140791.

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    High pressure torsion processing of maraging steel 250: Microstructure and mechanical behaviour evolution

    Jacob, K., Yadav, D., Dixit, S., Hohenwarter, A. & Jaya, B. N., 20 Jan 2021, In: Materials Science and Engineering A. 802.2021, 20 January, 13 p., 140665.

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    Influence of thermomechanical fatigue loading conditions on the nanostructure of secondary hardening steels

    Hofinger, M., Seisenbacher, B., Landefeld, A., Ognianov, M., Turk, C., Leitner, H. & Schnitzer, R., 20 Jan 2021, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 802.2021, 20 January, 11 p., 140672.

    Research output: Contribution to journal › Article › Research › peer-review

  32. 2020
  33. Published

    Mechanism of low temperature deformation in aluminium alloys

    Gruber, B., Weißensteiner, I., Kremmer, T., Grabner, F., Falkinger, G., Schökel, A., Spieckermann, F., Schäublin, R., Uggowitzer, P. & Pogatscher, S., 23 Sept 2020, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 795, 795, 11 p., 139935.

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    Balancing the strength and ductility of graphene oxide-carbon nanotube hybrid reinforced aluminum matrix composites with bimodal grain distribution

    Xu, Z. Y., Li, C. J., Wang, Z., Fang, D., Gao, P., Tao, J. M., Yi, J. H. & Eckert, J., 20 Aug 2020, In: Materials Science and Engineering A. 796.2020, 7 October, 7 p., 140067.

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Novel intermetallic-reinforced near-α Ti alloys manufactured by spark plasma sintering

    Wimler, D., Lindemann, J., Gammer, C., Spörk-Erdely, P., Stark, A., Clemens, H. & Mayer, S., 5 Aug 2020, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 792.2020, 5 August, 11 p., 139798.

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    Environmental hydrogen embrittlement associated with decohesion and void formation at soluble coarse particles in a cold-rolled Al–Cu based alloy

    Safyari, M., Moshtaghi, M. & Kuramoto, S., 9 Jul 2020, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 799.2022, 2 January, 12 p., 139850.

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    Strain aging characterization and physical modelling of over-aging in dual phase steel

    Soliman, M., Shan, Y. V., Mendez Martin, F., Kozeschnik, E. & Palkowski, H., 24 Jun 2020, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 788.2020, 24 June, 13 p., 139595.

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    Evaluation of tensile and low-cycle fatigue properties at elevated temperatures in piston aluminum-silicon alloys with and without nano-clay-particles and heat treatment

    Azadi, M., Bahmanabadi, H., Grün, F. & Winter, G., 11 May 2020, In: Materials Science and Engineering A. 788.2020, 24 June, 16 p., 139497.

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    Effect of tempering and deep cryogenic treatment on microstructure and mechanical properties of Cr–Mo–V–Ni steel

    Yan, Z., Liu, K. & Eckert, J., 6 May 2020, In: Materials Science and Engineering A. 787.2020, 10 June, 8 p., 139520.

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    Transformation-enhanced strength and ductility in a FeCoCrNiMn dual phase high-entropy alloy

    Zhang, T., Zhao, R. D., Wu, F. F., Lin, S. B., Jiang, S. S., Huang, Y. J., Chen, S. H. & Eckert, J., 7 Apr 2020, In: Materials Science and Engineering A. 780.2020, 7 April, 7 p., 139182.

    Research output: Contribution to journal › Article › Research › peer-review

  41. Published

    Effect of mechanically induced structural rejuvenation on the deformation behaviour of CuZr based bulk metallic glass

    Ebner, C., Pauly, S., Eckert, J. & Rentenberger, C., 31 Jan 2020, In: Materials Science and Engineering A. 773.2020, 31 January, 9 p., 138848.

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    Aluminum matrix composites reinforced with metallic glass particles with core-shell structure

    Guan, H. D., Li, C. J., Gao, P., Prashanth, K. G., Tan, J., Eckert, J., Tao, J. M. & Yi, J., 13 Jan 2020, In: Materials Science and Engineering A. 771.2020, 13 January, 5 p., 138630.

    Research output: Contribution to journal › Article › Research › peer-review

  43. 2019
  44. Published

    On the mean stress sensitivity of cast aluminium considering imperfections

    Aigner, R., Leitner, M. & Stoschka, M., 5 Jun 2019, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 758.2019, June, p. 172-184 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    Controlling the distribution of structural heterogeneities in severely deformed metallic glass

    Bian, X. L., Zhao, D., Kim, J. T., Sopu, D., Wang, G., Pippan, R. & Eckert, J., 2 Mar 2019, In: Materials Science and Engineering A. 752.2019, 3 April, p. 36-42 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    A probabilistic Kitagawa-Takahashi diagram for fatigue strength assessment of cast aluminium alloys

    Aigner, R., Pusterhofer, S., Pomberger, S., Leitner, M. & Stoschka, M., 4 Feb 2019, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 745.2019, February, p. 326-334 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    Effect of heat treatments on microstructure and properties of CuCrZr produced by laser-powder bed fusion

    Wallis, C. & Buchmayr, B., 28 Jan 2019, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 744.2019, January, p. 215-223 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    Microstructure, texture evolution and tensile properties of extruded Mg-4.58Zn-2.6Gd-0.16Zr alloy

    Xiao, L., Yang, G., Chen, J., Luo, S. F., Li, J. & Jie, W., 28 Jan 2019, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 744.2019, January, p. 277-289 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    Tailoring bimodal grain size structures in nanocrystalline compositionally complex alloys to improve ductility

    Schuh, B., Pippan, R. & Hohenwarter, A., 25 Jan 2019, In: Materials Science and Engineering A. 748.2019, 4 March, p. 379-385 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    Residual stress and microstructure evolution in steel tubes for different cooling conditions – Simulation and verification

    Brunbauer, S., Winter, G., Antretter, T., Staron, P. & Ecker, W., 2019, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 747, p. 73-79

    Research output: Contribution to journal › Article › Research › peer-review

  51. Published

    Solute clustering and precipitation in an Al-Cu-Mg-Ag-Si model alloy

    LI, J., An, Z., Hage, F. S., Wang, H. Y., Xie, P., Jin, S., Ramasse, Q. M. & Sha, G., 2019, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 760.2019, 8 July, p. 366-376 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  52. 2018
  53. Published

    Phase formation, microstructure and deformation behavior of heavily alloyed TiNb- and TiV-based titanium alloys

    Okulov, I. V., Bönisch, M., Okulov, A. V., Volegov, A. S., Attar, H., Ehtemam-Haghighi, S., Calin, M., Wang, Z., Hohenwarter, A., Kaban, I., Prashanth, K. G. & Eckert, J., 22 Aug 2018, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 733.2018, 22 August, p. 80-86 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  54. E-pub ahead of print

    In-situ observations of the fracture and adhesion of Cu/Nb multilayers on polyimide substrates

    Cordill, M., Kleinbichler, A., Völker, B., Kraker, P., Economy, D. R., Többens, D. M., Kirchlechner, C. & Kennedy, M. S., 14 Aug 2018, (E-pub ahead of print) In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 735.2018, 26 September, p. 456-462 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  55. Published

    Cooperative deformation behavior between the shear band and boundary sliding of an Al-based nanostructure-dendrite composite

    Kim, J. T., Hong, S. H., Kim, Y. S., Park, H. J., Maity, T., Chawake, N., Bian, X. L., Sarac, B., Park, J. M., Prashanth, K. G., Park, J. Y., Eckert, J. & Kim, K. B., 11 Aug 2018, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 735.2018, 26 September, p. 81-88 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  56. E-pub ahead of print

    Microstructure and mechanical properties of a low C steel subjected to bainitic of quenching and partitioning heat treatments

    Ebner, S., Suppan, H., Schnitzer, R. & Hofer, C., 10 Aug 2018, (E-pub ahead of print) In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 735.2018, 26 September, 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  57. Published

    Microstructure and strength of nano-/ultrafine-grained carbon nanotube-reinforced titanium composites processed by high-pressure torsion

    Li, F. X., Hao, P. D., Yi, J. H., Chen, Z., Prashanth, K. G., Maity, T. & Eckert, J., 11 Apr 2018, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 722.2018, 11 April, p. 122-128 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  58. E-pub ahead of print

    Microstructure and mechanical properties of foundry Al-Si-Cu-Hf alloy

    Xing, Y., Jia, Z., LI, J., Ding, L., Huang, H. & Liu, Q., 7 Mar 2018, (E-pub ahead of print) In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 722.2018, 11 April, p. 197-205 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  59. E-pub ahead of print

    Experimental and numerical investigations of the γ″ and γ′ precipitation kinetics in Alloy 718

    Drexler, A. K., Oberwinkler, B., Primig, S., Turk, C., Povoden-Karadeniz, E., Heinemann, A., Ecker, W. & Stockinger, M., 6 Mar 2018, (E-pub ahead of print) In: Materials Science and Engineering A. 723.2018, 18 April, p. 314-323 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  60. Published

    Microstructure and mechanical properties of a heat-treatable Al-3.5Cu-1.5Mg-1Si alloy produced by selective laser melting

    Wang, P., Gammer, C., Brenne, F., Prashanth, K. G., Mendes, R. G., Rümmeli, M. H., Gemming, T., Eckert, J. & Scudino, S., 10 Jan 2018, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 711.2018, January, p. 562-570 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  61. Published

    Enhanced mechanical properties of Al2O3-C refractories with silicon hybridized expanded graphite

    Wang, Q., Li, Y., Jin, S., Sang, S., Xu, Y., Xu, X. & Wang, G., 2 Jan 2018, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 709, p. 160-171 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  62. Published

    Precipitate strengthening and thermal stability in three component metallic nanolaminate thin films

    Schoeppner, R., Taylor, A. A., Cordill, M., Zbib, H. M., Michler, J. & Bahr, D. F., 2018, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 712.2018, 17 January, p. 485-492 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  63. 2017
  64. E-pub ahead of print

    Corrigendum to “Structural modifications in sub-Tg annealed CuZr-based metallic glass”

    Sarac, B., Bernasconi, A., Wright, J., Stoica, M., Spieckermann, F., Mühlbacher, M., Keckes, J., Bian, X. L., Wang, G. & Eckert, J., 6 Dec 2017, (E-pub ahead of print) In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 712.2018, 17 January, p. 819 1 p.

    Research output: Contribution to journal › Article › Research › peer-review

  65. E-pub ahead of print

    Influence of severe plastic deformation and specimen orientation on the fatigue crack propagation behavior of a pearlitic steel

    Leitner, T., Trummer, G., Pippan, R. & Hohenwarter, A., 13 Oct 2017, (E-pub ahead of print) In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 710.2018, 5 January, p. 260-270 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  66. Published

    The effect of residual stresses and strain reversal on the fracture toughness of TiAl alloys

    Appel, F., Paul, J., Staron, P., Oehring, M., Kolednik, O., Predan, J. & Fischer, F-D., 7 Oct 2017, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 709.2018, 2 January, p. 17-29 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  67. E-pub ahead of print

    Structural modifications in sub-Tg annealed CuZr-based metallic glass

    Sarac, B., Bernasconi, A., Wright, J., Stoica, M., Spieckermann, F., Mühlbacher, M., Keckes, J., Bian, X., Wang, G. & Eckert, J., 14 Sept 2017, (E-pub ahead of print) In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 707.2017, 7 November, p. 245-252 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  68. E-pub ahead of print

    Microporosity and statistical size effect on the fatigue strength of cast aluminium alloys EN AC-45500 and 46200

    Leitner, M., Garb, C., Remes, H. & Stoschka, M., 8 Sept 2017, (E-pub ahead of print) In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 707.2017, 7 November, p. 567-575 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  69. Published

    Impact of severe plastic deformation on microstructure and fracture toughness evolution of a duplex-steel

    Schwarz, K. T., Kormout, K., Pippan, R. & Hohenwarter, A., 4 Aug 2017, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 703.2017, 4 August, p. 173-179 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  70. E-pub ahead of print

    Friction welding of selective laser melted Ti6Al4V parts

    Prashanth, K. G., Damodaram, R., Maity, T., Wang, P. & Eckert, J., 3 Aug 2017, (E-pub ahead of print) In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 704.2017, September, p. 66-71 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  71. E-pub ahead of print

    Internal friction and atomic relaxation processes in an intermetallic Mo-rich Ti-44Al-7Mo (γ+βo) model alloy

    Usategui, L., No, M. L., Mayer, S., Clemens, H. & Juan, J. S., 9 Jun 2017, (E-pub ahead of print) In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 700.2017, 17 July, p. 495-502 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  72. E-pub ahead of print

    Compressed Bi-crystal micropillars showing a sigmoidal deformation state – A computational study

    Toth, F., Kirchlechner, C., Fischer, F-D., Dehm, G. & Rammerstorfer, F. G., 26 May 2017, (E-pub ahead of print) In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 700.2017, 17 July, p. 168-174 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  73. E-pub ahead of print

    Reduced brittleness of multi-walled carbon nanotubes (MWCNTs) containing Al2O3-C refractories with boron carbide

    Liao, N., Li, Y., Jin, S., Sang, S. & Liu, G., 12 May 2017, (E-pub ahead of print) In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 698.2017, 20 June, p. 80-87 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  74. Published

    Nanoindentation and wear properties of Ti and Ti-TiB composite materials produced by selective laser melting

    Attar, H., Ehtemam-Haghighi, S., Kent, D., Okulov, I. V., Wendrock, H., Bönisch, M., Volegov, A. S., Calin, M., Eckert, J. & Dargusch, M. S., Mar 2017, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 688, p. 20-26 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  75. E-pub ahead of print

    The influence of microstructure on the cyclic deformation and damage of copper and an oxide dispersion strengthened steel studied via in-situ micro-beam bending

    Howard, C. B., Fritz, R., Alfreider, M., Kiener, D. & Hosemann, P. M., 22 Jan 2017, (E-pub ahead of print) In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 687.2017, 27 February, p. 313-322 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  76. Published

    Micro-to-nano-scale deformation mechanism of a Ti-based dendritic-ultrafine eutectic alloy exhibiting large tensile ductility

    Okulov, I. V., Bönisch, M., Volegov, A. S., Shahabi, H. S., Wendrock, H., Gemming, T. & Eckert, J., 13 Jan 2017, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 682.2017, 13 January, p. 673-678 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  77. Published

    Creep properties and creep microstructure evolution of Mg-2.49Nd-1.82Gd-0.19Zn-0.4Zr alloy

    Han, W., Yang, G., Xiao, L., LI, J. & Jie, W., 2017, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 684.2017, 27 January, p. 90-100 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  78. 2016
  79. E-pub ahead of print

    Effect of reverted austenite on tensile and impact strength in a martensitic stainless steel: An in-situ X-ray diffraction study

    Wießner, M., Gamsjäger, E., van der Zwaag, S. & Angerer, P., 12 Nov 2016, (E-pub ahead of print) In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 682.2017, 13 January, p. 117-125 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  80. Published

    Effect of cerium addition on microstructure and mechanical properties of high-strength Fe85Cr4Mo8V2C1 cast steel

    Hufenbach, J., Helth, A., Lee, M. H., Wendrock, H., Giebeler, L., Choe, C. Y., Kim, K. H., Kühn, U., Kim, T. S. & Eckert, J., 30 Sept 2016, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 674.2016, 30 September, p. 366-374 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  81. Published

    Interplay between sample size and grain size: Single crystalline vs. ultrafine-grained chromium micropillars

    Fritz, R., Maier-Kiener, V., Lutz, D. & Kiener, D., 30 Sept 2016, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 674.2016, 30 September, p. 626-633 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  82. Published

    Influence of Ag and Co additions on glass-forming ability, thermal and mechanical properties of Cu–Zr–Al bulk metallic glasses

    Escher, B., Kühn, U., Eckert, J., Rentenberger, C. & Pauly, S., 15 Sept 2016, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 673.2016, 15 September, p. 90-98 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  83. Published

    Laser surface remelting of a Cu-Al-Ni-Mn shape memory alloy

    da Silva, M. R., Gargarella, P., Gustmann, T., Botta Filho, W. J., Kiminami, C. S., Eckert, J., Pauly, S. & Bolfarini, C., 20 Apr 2016, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 661.2016, 20 April, p. 61-67 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  84. E-pub ahead of print

    Comparison of intergranular strain formation of conventional and newly developed nickel based superalloys

    Wagner, J., Hofmann, M., Van Petegem, S., Krempaszky, C., Hoelzel, M. & Stockinger, M., 15 Mar 2016, (E-pub ahead of print) In: Materials Science and Engineering A. 662.2016, 26 April, p. 303-307 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  85. Published

    Deformation and fracture characteristics of ultrafine-grained vanadium

    Hohenwarter, A. & Wurster, S., 2016, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 650, p. 492-496 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  86. Published

    Impact of the B2 ordering behavior on the mechanical properties of a Fe Co Mo alloy

    Turk, C., Leitner, H., Kellezi, G., Clemens, H., Gan, W., Staron, P. & Primig, S., 2016, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 662, p. 511-518 8 p., 662.

    Research output: Contribution to journal › Article › Research › peer-review

  87. Published

    Interplay between sample size and grain size: Singlec rystalline vs. ultrafine-grained chromium micropillars

    Fritz, R., Maier-Kiener, V., Lutz, D. & Kiener, D., 2016, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 674, p. 626-633 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  88. Published

    Microstructure Evolution and Mechanical Properties of directionally solidified Mg-xGd (x¼0.8, 1.5,and2.5)alloys

    Luo, S., Yang, G., Liu, S., Wang, J., Li, J. & Jie, W., 2016, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 662, p. 241-250 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  89. Published

    Morphology change of retained austenite during austempering of carbide-freebainiticsteel

    Hofer, C., Winkelhofer, F., Clemens, H. & Primig, S., 2016, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 664, p. 236-246 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  90. Published

    Relationship between mechanical damage and electrical degradation in polymer supported metal films subjected to cyclic loading

    Glushko, O., Klug, A., List-Kratochvil, E. J. W. & Cordill, M., 2016, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing.

    Research output: Contribution to journal › Article › Research › peer-review

  91. 2015
  92. Published

    Designed heterogeneities improve the fracture reliability of a Zr-based bulk metallic glass

    Li, B. S., Shakur Shahabi, H., Scudino, S., Eckert, J. & Kruzic, J. J., 14 Oct 2015, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 646, p. 242-248 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  93. Published

    Revisiting fatigue crack growth in various grain size regimes of Ni

    Leitner, T., Hohenwarter, A. & Pippan, R., 14 Oct 2015, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 646, p. 294-305 12 p., 32705.

    Research output: Contribution to journal › Article › Research › peer-review

  94. E-pub ahead of print

    Characterization of the high temperature deformatin behavior of two intermetallic TiAl-Mo alloys

    Godor, F., Werner, R., Lindemann, J., Clemens, H. & Mayer, S., 18 Sept 2015, (E-pub ahead of print) In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 648.2015, 11 November, p. 208-216 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  95. Published

    Elevated temperature mechanical properties of novel ultra-fine grained Cu-Nb composites

    Primorac, M-M., Abad, M. D., Hosemann, P., Kreuzeder, M., Maier, V. & Kiener, D., 2015, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 625, p. 296-302

    Research output: Contribution to journal › Article › Research › peer-review

  96. Published

    Incremental high pressure torsion as a novel severe plastic deformation process: Processing features and application to copper

    Hohenwarter, A., 2015, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 626, p. 80-85

    Research output: Contribution to journal › Article › Research › peer-review

  97. 2014

  98. Microstructure and temperature dependence of intergranular strains on diffractometric macroscopic residual stress analysis

    Wimpory, R., Krempaszky, C. & Stockinger, M., 16 Sept 2014, In: Materials Science and Engineering A. 618, p. 271-279 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  99. Published

    Yield strength prediction in Ni-base alloy 718Plus based on thermo-kinetic precipitation simulation

    Ahmadi, M. R., Povoden-Karadeniz, E., Whitmore, L., Stockinger, M., Falahati, A. & Kozeschnik, E., 1 Jul 2014, In: Materials Science and Engineering A. 608, p. 114-122 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  100. Published

    Comparison of microstructural crack paths between hypo-eutectic Al-Si-Cu and Al-Si-Mg cast alloys in high plasticity regimes under rotating bending

    Huter, P., Winter, G., Renhart, P., Schwab, M., Oberfrank, S., Grün, F. & Stauder, B., 2014, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 618, p. 578-585

    Research output: Contribution to journal › Article › Research › peer-review

  101. Published

    Hot-working behavior of an advanced intermetallic multi-phase gamma-TiAl based alloy

    Schwaighofer, E., Clemens, H., Lindemann, J., Stark, A. & Mayer, S., 2014, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 614, p. 297-310

    Research output: Contribution to journal › Article › Research › peer-review

  102. Published

    Microstructural investigation of thermally aged nickel-based superalloy 718Plus

    Whitmore, L., Ahmadi, M. R., Stockinger, M., Povoden-Karadeniz, E., Kozeschnik, E. & Leitner, H., 2014, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 594, p. 253-259

    Research output: Contribution to journal › Article › Research › peer-review

  103. Published

    The microstructure of heat-treated nickel-based superalloy 718Plus

    Whitmore, L., Ahmadi, M. R., Guetaz, L., Leitner, H., Povoden-Karadeniz, E., Stockinger, M. & Kozeschnik, E., 2014, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 610, p. 39-45

    Research output: Contribution to journal › Article › Research › peer-review

  104. 2013
  105. Published

    The influence of microstructure and operating temperature on the fatigue endurance of hot forged Inconel (R) 718 components

    Maderbacher, H., Oberwinkler, B., Gänser, H-P., Tan, W., Rollett, M. & Stoschka, M., 15 Nov 2013, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 585, p. 123-131

    Research output: Contribution to journal › Article › Research › peer-review

  106. Published

    Activation Parameters for Deformation of Ultrafine-Grained Aluminium as Determined by Indentation Strain Rate Jumps at Elevated Temperature

    Wheeler, J. M., Maier, V., Durst, K., Göken, M. & Michler, J., 2013, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 585, p. 108-113

    Research output: Contribution to journal › Article › Research › peer-review

  107. Published

    Direct or indirect: Influence of type of retained austenite decomposition during tempering on the toughness of a hot-work tool steel

    Lerchbacher, C., Zinner, S. & Leitner, H., 2013, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 564, p. 163-168

    Research output: Contribution to journal › Article › Research › peer-review

  108. Published

    Influence of bulk pre-straining on the size effect in nickel compression pillars

    Schneider, A. S., Kiener, D., Yakacki, C. M., Maier, H. J., Gruber, P. A., Tamura, N., Kunz, M., Minor, A. M. & Frick, C. P., 2013, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 559, p. 147-158 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  109. Published

    Influence of grain shape and orientation on the mechanical properties of high pressure deformed nickel

    Rathmayr, G. B., Hohenwarter, A. & Pippan, R., 2013, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 560, p. 224-231

    Research output: Contribution to journal › Article › Research › peer-review

  110. Published

    Influence of morphology and structural size on the fracture behavior of a nanostructured pearlitic steel

    Kammerhofer, C., Hohenwarter, A., Scheriau, S., Brantner, H. P. & Pippan, R., 2013, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 585, p. 190-196

    Research output: Contribution to journal › Article › Research › peer-review

  111. Published

    Solid solution hardening of molybdenum-hafnium alloys: Experiments and Modeling

    Pöhl, C., Schatte, J. & Leitner, H., 2013, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 559, p. 643-650

    Research output: Contribution to journal › Article › Research › peer-review

  112. Published

    The effect of main alloying elements on the physical properties of Al–Si foundry alloys

    Stadler, F., Antrekowitsch, H., Fragner, W., Kaufmann, H., Pinatel, E. & Uggowitzer, P. J., 2013, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. p. 1-1

    Research output: Contribution to journal › Article › Research › peer-review

  113. Published

    The influence of microstructure and operating temperature on the fatigue endurance of hot forged Inconel® 718 components

    Maderbacher, H., Oberwinkler, B., Gänser, H-P., Tan, W., Rollett, M. & Stoschka, M., 2013, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. Volume 585, p. 123-131

    Research output: Contribution to journal › Article › Research › peer-review

  114. 2012
  115. Published

    In situ formation of carbon nanotubes and ceramic whiskers in Al2O3-C refractories with addition of Ni-catalyzed phenolic resin

    Luo, M., Li, Y., Sang, S., Zhao, L., Jin, S. & Li, Y., 15 Dec 2012, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 558, p. 533-542

    Research output: Contribution to journal › Article › Research › peer-review

  116. Published

    Microstructures and mechanical properties of Al2O3-C refractories with addition of multi-walled carbon nanotubes

    Luo, M., Li, Y., Jin, S., Sang, S., Zhao, L. & Li, Y., 30 Jun 2012, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 548, p. 134-141

    Research output: Contribution to journal › Article › Research › peer-review

  117. Published

    A comprehensive study on the damage tolerance of ultrafine-grained copper

    Hohenwarter, A. & Pippan, R., 2012, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 540, p. 89-96

    Research output: Contribution to journal › Article › Research › peer-review

  118. Published

    Influence of the heating rate on the recrystallization behavior of molybdenum

    Primig, S., Leitner, H., Knabl, W., Lorich, A., Clemens, H. & Stickler, R., 2012, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 535, p. 316-324

    Research output: Contribution to journal › Article › Research › peer-review

  119. Published

    Precipitation microstructure and age-hardening response of an Mg-Gd-Nd-Zn-Zr alloy

    Li, J., Sha, G., Wang, T., Jie, W. & Ringer, S., 2012, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 534, p. 1-6

    Research output: Contribution to journal › Article › Research › peer-review

  120. Published

    Precipitation microstructure and their strengthening effects of an Mg-2.8Nd-0.6Zn-0.4Zr alloy with a 0.2 wt. % Y addition

    Li, J., Sha, G., Jie, W. & Ringer, S., 2012, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 538, p. 272-280

    Research output: Contribution to journal › Article › Research › peer-review

  121. Published

    Transmission electron microscopy of single and double aged 718plus superalloy

    Whitmore, L., Leitner, H., Povoden-Karadeniz, E., Radis, R. & Stockinger, M., 2012, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 534, p. 413-423

    Research output: Contribution to journal › Article › Research › peer-review

  122. 2011
  123. Published

    Study of the hot deformation behaviour in Ti-5Al-5Mo-5V-3Cr-1Zr

    Warchomicka, F., Poletti, C. & Stockinger, M., 25 Oct 2011, In: Materials Science and Engineering A. 528, 28, p. 8277-8285 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  124. Published

    Assessment of dynamic softening mechanisms in Allvac® 718Plus™ by EBSD analysis

    Mitsche, S., Sommitsch, C., Huber, D., Stockinger, M. & Poelt, P., 25 Apr 2011, In: Materials Science and Engineering A. 528, 10-11, p. 3754-3760 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  125. Published

    Deformation mechanisms of a modified 316L austenitic steel subjected to high pressure torsion

    Scheriau, S., Zhang, Z., Kleber, S. & Pippan, R., 2011, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. p. 2776-2786

    Research output: Contribution to journal › Article › Research › peer-review

  126. Published

    Effect of oxide particles on the stabilization and final microstructure in aluminium

    Bachmaier, A. & Pippan, R., 2011, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. p. 7589-7595

    Research output: Contribution to journal › Article › Research › peer-review

  127. Published

    Modeling the fatigue crack growth behavior of Ti-6Al-4V by considering grain size and stress ratio

    Oberwinkler, B., 2011, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 528, p. 5983-5992

    Research output: Contribution to journal › Article › Research › peer-review

  128. Published

    Significance of temperature increase in processing by high-pressure torsion

    Edalati, K., Miresmaeili, R., Horita, Z., Kanayama, H. & Pippan, R., 2011, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. p. 7301-7305

    Research output: Contribution to journal › Article › Research › peer-review

  129. 2010
  130. Published

    Anisotropic fracture behavior of ultrafine-grained iron

    Hohenwarter, A. & Pippan, R., 2010, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 527, p. 2649-2656

    Research output: Contribution to journal › Article › Research › peer-review

  131. Published

    Hardening and microstructure reactions in high-temperature Equal-Channel Angular Pressed Mg-Nd-Gd-Zn-Zr alloy

    Li, J., Sha, G., Xu, W., Xia, K., Jie, W. & Simon, R., 2010, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 527, p. 5092-5099

    Research output: Contribution to journal › Article › Research › peer-review

  132. Published

    Influence of reverted austenite on static and dynamic mechanical properties of a PH 13-8 Mo maraging steel

    Schnitzer, R., Zickler, G., Erhardt, L., Clemens, H., Zinner, S., Thomas, L. & Leitner, H., 2010, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 527, p. 2065-2070

    Research output: Contribution to journal › Article › Research › peer-review

  133. Published

    Investigation of the fatigue behavior of Al thin films with different microstructure

    Dehm, G., Heinz, W. & Pippan, R., 2010, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. p. 7757-7763

    Research output: Contribution to journal › Article › Research › peer-review

  134. Published

    Local and global measures of the fracture toughness of metal matrix composites

    Kolednik, O. & Sabirov, I., 2010, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. p. 3100-3110

    Research output: Contribution to journal › Article › Research › peer-review

  135. Published

    Transformation from continuous-to-isothermal aging applied on a maraging steel

    Primig, S. & Leitner, H., 2010, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 527, p. 4399-4405

    Research output: Contribution to journal › Article › Research › peer-review

  136. 2009
  137. Published

    Micro-compression testing: A critical discussion of experimental constraints

    Kiener, D., Motz, C. & Dehm, G., 2009, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. A505, p. 79-87

    Research output: Contribution to journal › Article › Research › peer-review

  138. Published

    Microstructure and mechanical properties of the superalloy ATI Allvac 718PlusTM

    Zickler, G., Schnitzer, R., Radis, R., Hochfellner, R., Schweins, R., Stockinger, M. & Leitner, H., 2009, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. p. 295-303

    Research output: Contribution to journal › Article › Research › peer-review

  139. Published

    Modeling fatigue crack growth in a bimaterial specimen with the configurational forces concept

    Kolednik, O., Predan, J., Gubeljak, N. & Fischer, F. D., 2009, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 519, p. 172-183

    Research output: Contribution to journal › Article › Research › peer-review

  140. Published

    Stress-controlled fatigue behaviour of micro-sized polycrystalline copper wires

    Dehm, G., 2009, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 515, p. 71-78

    Research output: Contribution to journal › Article › Research › peer-review

  141. 2008
  142. Published

    Competing Accommodation Mechanisms of the Martensite in Nanocrystalline NiTi Shape Memory Alloys

    Waitz, T., Pranger, W., Antretter, T., Fischer, F. D. & Karnthaler, H-P., 2008, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 481-482, p. 479-483

    Research output: Contribution to journal › Article › Research › peer-review

  143. Published

    Influence of chemical composition and manufacturing conditions on properties of NiTi shape memory alloys

    Mehrabi, K., Bahmanpour, H., Shokuhfar, A. & Kneißl, A., 2008, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 481-482, p. 693-696

    Research output: Contribution to journal › Article › Research › peer-review

  144. Published

    Influence of grain size on orientation changes during plastic deformation

    Scheriau, S. & Pippan, R., 2008, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 493, p. 48-52

    Research output: Contribution to journal › Article › Research › peer-review

  145. Published

    On the overaging behaviour of tool steel X38CrMoV5-3

    Bischof, M., Staron, P., Caliskanoglu, Z. D., Leitner, H., Scheu, C. & Clemens, H., 2008, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 472, p. 148-152

    Research output: Contribution to journal › Article › Research › peer-review

  146. Published

    Precipitation processes in a Mg–Zn–Sn alloy studied by TEM and SAXS

    Rashkova, B., Prantl, W., Görgl, R., Keckes, J., Cohen, S., Bamberger, M. & Dehm, G., 2008, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. A494, p. 158-164

    Research output: Contribution to journal › Article › Research › peer-review

  147. 2007
  148. Published

    Analysis of roughness-induced crack closure based on asymmetric crack-wake plasticity and size ratio effect

    Pippan, R. & Pokluda, J., 2007, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. A462, p. 355-358

    Research output: Contribution to journal › Article › Research › peer-review

  149. Published

    Changes in the mechanical properties of a pearlitic steel due to large shear deformation

    Wetscher, F., Stock, R. & Pippan, R., 2007, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 445-446, p. 237-243

    Research output: Contribution to journal › Article › Research › peer-review

  150. Published

    FIB damage of Cu and possible consequences for miniaturized mechanical tests

    Kiener, D., Motz, C., Rester, M., Jenko, M. & Dehm, G., 2007, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 459, p. 262-272

    Research output: Contribution to journal › Article › Research › peer-review

  151. 2006
  152. Published

    Annealing studies of nanocomposite Ti-Si-C thin films with respect to phase stability and tribological performance

    Rester, M., Neidhardt, J., Eklund, P., Emmerlich, J., Ljungcrantz, H., Hultman, L. & Mitterer, C., 2006, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 429, p. 90-95

    Research output: Contribution to journal › Article › Research › peer-review

  153. Published

    Characterisation of Residual Stresses in Turbine Discs by Neutron and High-Energy X-Ray Diffraction and Comparisation to Finite Element Modeling

    Cihak, U., Staron, P., Clemens, H., Homeyer, J., Stockinger, M. & Tockner, J., 2006, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 437, p. 75-82

    Research output: Contribution to journal › Article › Research › peer-review

  154. Published

    Comparison of NiAl precipitation in a medium carbon secondary hardening steel and C-free PH13-8 maraging steel

    Erlach, S. D., Leitner, H., Bischof, M., Clemens, H., Danoix, F., Lemarchand, D. & Siller, I., 2006, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 429, p. 96-106

    Research output: Contribution to journal › Article › Research › peer-review

  155. Published

    Dynamic recrystallization of NI-base alloys-Experimental results and comparisons with simulations

    Poelt, P., Sommitsch, C., Mitsche, S. & Walter, M., 2006, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. p. 306-314

    Research output: Contribution to journal › Article › Research › peer-review

  156. Published

    Evolution of misorientation distribution during warm 'abc' forging of commercial-purity titanium

    Mironov, S. Y., Salishchev, G. A., Myshlyaev, M. M. & Pippan, R., 2006, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 418, p. 257-267

    Research output: Contribution to journal › Article › Research › peer-review

  157. Published

    Microstructural evolution of Cr-Mn-N Austenitic Steels during Cold Work Hardening

    Saller, G., Spiradek-Hahn, K., Scheu, C. & Clemens, H., 2006, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 427, p. 246-254

    Research output: Contribution to journal › Article › Research › peer-review

  158. Published

    On the texture of spray formed gamma titanium aluminide

    Staron, P., Bartels, A., Brokmeier, H-G., Gerling, R., Schimansky, F-P. & Clemens, H., 2006, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 416, p. 11-17

    Research output: Contribution to journal › Article › Research › peer-review

  159. Published

    Shape Factors in Modeling of Precipitation

    Kozeschnik, E., Svoboda, J. & Fischer, F. D., 2006, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 441, p. 68-72

    Research output: Contribution to journal › Article › Research › peer-review

  160. Published

    The High-temperature Background in Intermetallic Alloys

    Weller, M., Clemens, H. & Haneczok, G., 2006, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 442, p. 138-141

    Research output: Contribution to journal › Article › Research › peer-review

  161. 2005
  162. Published

    Modeling the columnar-to-equiaxed transition with a three-phase Eulerian approach

    Ludwig, A. & Wu, M., 15 Dec 2005, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 413-414, p. 109-114 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  163. Published

    A Way of Coupling Ternary Phase Diagram Information with Multiphase Solidification Simulations

    Ludwig, A., Gruber-Pretzler, M., Mayer, F., Ishmurzin, A. & Wu, M., 2005, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 413-414, p. 485-489

    Research output: Contribution to journal › Article › Research › peer-review

  164. Published

    Analysis of the Precipitation Behaviour in a High Speed Steel with Small Angle Neutron Scattering

    Leitner, H., Staron, P., Clemens, H., Marsoner, S. & Warbichler, P., 2005, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 398, p. 323-331

    Research output: Contribution to journal › Article › Research › peer-review

  165. Published

    Discrete dislocation simulation of nanoindentation: The effect of statistically distributed dislocations

    Kreuzer, H. G. M. & Pippan, R., 2005, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 400-401, p. 460-462

    Research output: Contribution to journal › Article › Research › peer-review

  166. Published

    Influence of Argon Gas Bubbles and Non-Metallic Inclusions on the Flow Behavior in Steel Continuous Casting

    Pfeiler, C., Wu, M. & Ludwig, A., 2005, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 413-414, p. 115-120

    Research output: Contribution to journal › Article › Research › peer-review

  167. Published

    Measurement and Simulation of Temperature and Velocity Fields during the Cooling of Water in a Die Casting Model

    Eck, S., Stefan Kharicha, M., Ishmurzin, A. & Ludwig, A., 2005, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 413-414, p. 79-84

    Research output: Contribution to journal › Article › Research › peer-review

  168. Published

    Microstructure transition from lamellar to compacted graphite using different modification agents

    Geier, G. F., Bauer, W., Mckay, B. & Schumacher, P., 2005, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. p. 339-345

    Research output: Contribution to journal › Article › Research › peer-review

  169. Published

    Modelling the Columnar-to-Equiaxed Transition with a 3-Phase Eulerian Approach

    Ludwig, A. & Wu, M., 2005, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 413-414, p. 109-114

    Research output: Contribution to journal › Article › Research › peer-review

  170. Published

    Nanoscaled structure of a Cu-Fe composite processed by high-pressure torsion

    Sauvage, X. & Pippan, R., 2005, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 410-411, p. 345-347

    Research output: Contribution to journal › Article › Research › peer-review

  171. Published

    Shape and Stability of the Slag/Melt Interface in a Small DC ESR Process

    Kharicha, A., Ludwig, A. & Wu, M., 2005, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 413-414, p. 129-134

    Research output: Contribution to journal › Article › Research › peer-review

  172. Published

    Strain hardening during high pressure torsion deformation

    Wetscher, F., Vorhauer, A. & Pippan, R., 2005, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 410-411, p. 213-216

    Research output: Contribution to journal › Article › Research › peer-review

  173. Published

    Stress/Strain Behaviour and Fatigue Limit of Grey Cast Iron

    Willidal, T., Bauer, W. & Schumacher, P., 2005, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. p. 578-582

    Research output: Contribution to journal › Article › Research › peer-review

  174. Published

    Study of Spatial Phase Separation during Solidification and Its Impact on the Formation of Macrosegregations

    Wu, M. & Ludwig, A., 2005, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 413-414, p. 192-199

    Research output: Contribution to journal › Article › Research › peer-review

  175. Published

    The determination of the local conditions for void initiation in front of a crack tip for materials with second-phase particles

    Sabirov, I., Duschlbauer, D., Pettermann, H. E. & Kolednik, O., 2005, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 393, p. 275-285

    Research output: Contribution to journal › Article › Research › peer-review

  176. 2004
  177. Published

    Amorphization of Ni60Nb20Zr20 by mechanical alloying

    Enayati, M. H., Schumacher, P. & Cantor, B., Jul 2004, In: Materials Science and Engineering A. 375-377, 1-2 SPEC. ISS., p. 812-814 3 p.

    Research output: Contribution to journal › Article › Research › peer-review

  178. Published

    Quantitative determination of the volume fraction of intergranular amorphous phase in sintered silicon nitride

    Roebben, G., Sarbu, C., Lube, T. & Van der Biest, O., 15 Apr 2004, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 370, 1-2, p. 453-458 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  179. Published

    Discrete dislocation simulation of nanoindentation: the effect of moving conditions and indenter shape

    Kreuzer, H. G. M. & Pippan, R., 2004, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 387-389, p. 254-256

    Research output: Contribution to journal › Article › Research › peer-review

  180. Published

    Effect of thermal treatment on microstructure in high pressure torsion (HPT) deformed nickel

    Schafler, E. & Pippan, R., 2004, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 387-389, p. 799-804

    Research output: Contribution to journal › Article › Research › peer-review

  181. Published

    Erratum to "On the experimental characterization of crystal plasticity in polycrystals"

    Tatschl, A. & Kolednik, O., 2004, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. A 364, p. 384-399

    Research output: Contribution to journal › Article › Research › peer-review

  182. Published

    Generalised ‘Jackson-Hunt’ Model for Eutectic Solidification at Low And Large Peclet Numbers And Any Binary Eutectic Phase Diagram

    Ludwig, A. & Leibbrandt, S., 2004, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. p. 540-546

    Research output: Contribution to journal › Article › Research › peer-review

  183. Published

    Influence of non-metallic inclusions on the austenite-to-ferrite phase transformation

    Gamsjäger, E., Fischer, F. D. & Svoboda, J., 2004, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 365, p. 291-297

    Research output: Contribution to journal › Article › Research › peer-review

  184. Published

    Non-Equilibrium Globular Microstructure suitable for Semi-Solid Casting of Light Metal Alloys by Rapid-Slug-Cooling-Technology (RSCT

    Ludwig, A., Bührig-Polaczek, A. & Sahm, P., 2004, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. p. 651-655

    Research output: Contribution to journal › Article › Research › peer-review

  185. Published

    Structural refinement of low alloyed steels during severe plastic deformation

    Wetscher, F., Vorhauer, A., Stock, R. & Pippan, R., 2004, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 387-389, p. 806-816

    Research output: Contribution to journal › Article › Research › peer-review

  186. 2003
  187. Published

    Effect of back stress evolution due to martensitic transformation on iso-volume fraction lines in a Cr-Ni-Mo-Al-Ti maraging steel

    Tanaka, K., Terasaki, T., Goto, S., Antretter, T., Fischer, F. D. & Cailletaud, G., 20 Jan 2003, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 341, 1-2, p. 189-196 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  188. 2002
  189. Published

    Back stress evolution and iso-volume fraction lines in a Cr-Ni-Mo-Al-Ti maraging steel in the process of martensitic transformation

    Nagayama, K., Terasaki, T., Goto, S., Tanaka, K., Antretter, T., Fischer, F. D., Cailletaud, G. & Azzouz, F., 25 Oct 2002, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 336, 1-2, p. 30-38 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  190. 2001
  191. Published

    Mechanical properties of a Cr-Ni-Mo-Al-Ti maraging steel in the process of martensitic transformation

    Nagayama, K., Terasaki, T., Tanaka, K., Fischer, F. D., Antretter, T., Cailletaud, G. & Azzouz, F., 30 Jun 2001, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 308, 1-2, p. 25-37 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  192. Published

    General Concept for a Stability Analysis of a Planar Interface under Rapid Solidification Conditions in Multicomponent Alloy Systems

    Ludwig, A. & Pustal, B., 2001, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. p. 337-340

    Research output: Contribution to journal › Article › Research › peer-review

  193. Published

    Heterogeneous nucleation in an Al-Ni-Si alloy studied using a metallic galss technique

    McKay, B., Cizek, P. & Schumacher, P., 2001, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. p. 240-244

    Research output: Contribution to journal › Article › Research › peer-review

  194. 1997
  195. Published

    Critical shapes and arrangements of carbides in high-speed tool steel

    Antretter, T. & Fischer, F. D., 1 Sept 1997, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 237, 1, p. 6-11 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  196. Published

    In-Situ Observation of Cellular Growth under Rapid Solidification Conditions

    Ludwig, A. & Sahm, P., 1997, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. p. 124-128

    Research output: Contribution to journal › Article › Research › peer-review

  197. 1994
  198. Published

    Undercooling of Superalloy Melts: Basis of a New Manufacturing Technique for Single-Crystal Turbine Blades

    Ludwig, A. & Sahm, P., 1994, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. p. 299-303

    Research output: Contribution to journal › Article › Research › peer-review

  199. 1991
  200. Published

    Heat Transfer in the Single Roller Quenching Methods

    Ludwig, A., 1991, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. p. 751-754

    Research output: Contribution to journal › Article › Research › peer-review

  201. Published

    Modeling of Dendritic Growth During the Ribbon Formation in Planar Flow Casting

    Ludwig, A. & Frommeyer, G., 1991, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. p. 722-725

    Research output: Contribution to journal › Article › Research › peer-review

  202. Published

    Solid-Liquid Interfacial Free Energy

    Ludwig, A., 1991, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. p. 577-580

    Research output: Contribution to journal › Article › Research › peer-review

View graph of relations