Materials science and engineering: A, Structural materials: properties, microstructure and processing, ‎0921-5093

Journal

ISSNs0921-5093
Additional searchable ISSN (electronic)1873-4936
51 - 100 out of 179Page size: 50

Research output

  1. 2018
  2. Published

    Phase formation, microstructure and deformation behavior of heavily alloyed TiNb- and TiV-based titanium alloys

    Okulov, I. V., Bönisch, M., Okulov, A. V., Volegov, A. S., Attar, H., Ehtemam-Haghighi, S., Calin, M., Wang, Z., Hohenwarter, A., Kaban, I., Prashanth, K. G. & Eckert, J., 22 Aug 2018, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 733.2018, 22 August, p. 80-86 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  3. E-pub ahead of print

    In-situ observations of the fracture and adhesion of Cu/Nb multilayers on polyimide substrates

    Cordill, M., Kleinbichler, A., Völker, B., Kraker, P., Economy, D. R., Többens, D. M., Kirchlechner, C. & Kennedy, M. S., 14 Aug 2018, (E-pub ahead of print) In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 735.2018, 26 September, p. 456-462 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  4. Published

    Cooperative deformation behavior between the shear band and boundary sliding of an Al-based nanostructure-dendrite composite

    Kim, J. T., Hong, S. H., Kim, Y. S., Park, H. J., Maity, T., Chawake, N., Bian, X. L., Sarac, B., Park, J. M., Prashanth, K. G., Park, J. Y., Eckert, J. & Kim, K. B., 11 Aug 2018, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 735.2018, 26 September, p. 81-88 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  5. E-pub ahead of print

    Microstructure and mechanical properties of a low C steel subjected to bainitic of quenching and partitioning heat treatments

    Ebner, S., Suppan, H., Schnitzer, R. & Hofer, C., 10 Aug 2018, (E-pub ahead of print) In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 735.2018, 26 September, 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    Microstructure and strength of nano-/ultrafine-grained carbon nanotube-reinforced titanium composites processed by high-pressure torsion

    Li, F. X., Hao, P. D., Yi, J. H., Chen, Z., Prashanth, K. G., Maity, T. & Eckert, J., 11 Apr 2018, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 722.2018, 11 April, p. 122-128 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  7. E-pub ahead of print

    Microstructure and mechanical properties of foundry Al-Si-Cu-Hf alloy

    Xing, Y., Jia, Z., LI, J., Ding, L., Huang, H. & Liu, Q., 7 Mar 2018, (E-pub ahead of print) In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 722.2018, 11 April, p. 197-205 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  8. E-pub ahead of print

    Experimental and numerical investigations of the γ″ and γ′ precipitation kinetics in Alloy 718

    Drexler, A. K., Oberwinkler, B., Primig, S., Turk, C., Povoden-Karadeniz, E., Heinemann, A., Ecker, W. & Stockinger, M., 6 Mar 2018, (E-pub ahead of print) In: Materials Science and Engineering A. 723.2018, 18 April, p. 314-323 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Microstructure and mechanical properties of a heat-treatable Al-3.5Cu-1.5Mg-1Si alloy produced by selective laser melting

    Wang, P., Gammer, C., Brenne, F., Prashanth, K. G., Mendes, R. G., Rümmeli, M. H., Gemming, T., Eckert, J. & Scudino, S., 10 Jan 2018, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 711.2018, January, p. 562-570 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    Enhanced mechanical properties of Al2O3-C refractories with silicon hybridized expanded graphite

    Wang, Q., Li, Y., Jin, S., Sang, S., Xu, Y., Xu, X. & Wang, G., 2 Jan 2018, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 709, p. 160-171 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    Precipitate strengthening and thermal stability in three component metallic nanolaminate thin films

    Schoeppner, R., Taylor, A. A., Cordill, M., Zbib, H. M., Michler, J. & Bahr, D. F., 2018, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 712.2018, 17 January, p. 485-492 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  12. 2017
  13. E-pub ahead of print

    Corrigendum to “Structural modifications in sub-Tg annealed CuZr-based metallic glass”

    Sarac, B., Bernasconi, A., Wright, J., Stoica, M., Spieckermann, F., Mühlbacher, M., Keckes, J., Bian, X. L., Wang, G. & Eckert, J., 6 Dec 2017, (E-pub ahead of print) In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 712.2018, 17 January, p. 819 1 p.

    Research output: Contribution to journal › Article › Research › peer-review

  14. E-pub ahead of print

    Influence of severe plastic deformation and specimen orientation on the fatigue crack propagation behavior of a pearlitic steel

    Leitner, T., Trummer, G., Pippan, R. & Hohenwarter, A., 13 Oct 2017, (E-pub ahead of print) In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 710.2018, 5 January, p. 260-270 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    The effect of residual stresses and strain reversal on the fracture toughness of TiAl alloys

    Appel, F., Paul, J., Staron, P., Oehring, M., Kolednik, O., Predan, J. & Fischer, F.-D., 7 Oct 2017, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 709.2018, 2 January, p. 17-29 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  16. E-pub ahead of print

    Structural modifications in sub-Tg annealed CuZr-based metallic glass

    Sarac, B., Bernasconi, A., Wright, J., Stoica, M., Spieckermann, F., Mühlbacher, M., Keckes, J., Bian, X., Wang, G. & Eckert, J., 14 Sept 2017, (E-pub ahead of print) In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 707.2017, 7 November, p. 245-252 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  17. E-pub ahead of print

    Microporosity and statistical size effect on the fatigue strength of cast aluminium alloys EN AC-45500 and 46200

    Leitner, M., Garb, C., Remes, H. & Stoschka, M., 8 Sept 2017, (E-pub ahead of print) In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 707.2017, 7 November, p. 567-575 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Impact of severe plastic deformation on microstructure and fracture toughness evolution of a duplex-steel

    Schwarz, K. T., Kormout, K., Pippan, R. & Hohenwarter, A., 4 Aug 2017, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 703.2017, 4 August, p. 173-179 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  19. E-pub ahead of print

    Friction welding of selective laser melted Ti6Al4V parts

    Prashanth, K. G., Damodaram, R., Maity, T., Wang, P. & Eckert, J., 3 Aug 2017, (E-pub ahead of print) In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 704.2017, September, p. 66-71 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  20. E-pub ahead of print

    Internal friction and atomic relaxation processes in an intermetallic Mo-rich Ti-44Al-7Mo (γ+βo) model alloy

    Usategui, L., No, M. L., Mayer, S., Clemens, H. & Juan, J. S., 9 Jun 2017, (E-pub ahead of print) In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 700.2017, 17 July, p. 495-502 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  21. E-pub ahead of print

    Compressed Bi-crystal micropillars showing a sigmoidal deformation state – A computational study

    Toth, F., Kirchlechner, C., Fischer, F.-D., Dehm, G. & Rammerstorfer, F. G., 26 May 2017, (E-pub ahead of print) In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 700.2017, 17 July, p. 168-174 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  22. E-pub ahead of print

    Reduced brittleness of multi-walled carbon nanotubes (MWCNTs) containing Al2O3-C refractories with boron carbide

    Liao, N., Li, Y., Jin, S., Sang, S. & Liu, G., 12 May 2017, (E-pub ahead of print) In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 698.2017, 20 June, p. 80-87 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Nanoindentation and wear properties of Ti and Ti-TiB composite materials produced by selective laser melting

    Attar, H., Ehtemam-Haghighi, S., Kent, D., Okulov, I. V., Wendrock, H., Bönisch, M., Volegov, A. S., Calin, M., Eckert, J. & Dargusch, M. S., Mar 2017, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 688, p. 20-26 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  24. E-pub ahead of print

    The influence of microstructure on the cyclic deformation and damage of copper and an oxide dispersion strengthened steel studied via in-situ micro-beam bending

    Howard, C. B., Fritz, R., Alfreider, M., Kiener, D. & Hosemann, P. M., 22 Jan 2017, (E-pub ahead of print) In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 687.2017, 27 February, p. 313-322 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    Micro-to-nano-scale deformation mechanism of a Ti-based dendritic-ultrafine eutectic alloy exhibiting large tensile ductility

    Okulov, I. V., Bönisch, M., Volegov, A. S., Shahabi, H. S., Wendrock, H., Gemming, T. & Eckert, J., 13 Jan 2017, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 682.2017, 13 January, p. 673-678 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    Creep properties and creep microstructure evolution of Mg-2.49Nd-1.82Gd-0.19Zn-0.4Zr alloy

    Han, W., Yang, G., Xiao, L., LI, J. & Jie, W., 2017, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 684.2017, 27 January, p. 90-100 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  27. 2016
  28. E-pub ahead of print

    Effect of reverted austenite on tensile and impact strength in a martensitic stainless steel: An in-situ X-ray diffraction study

    Wießner, M., Gamsjäger, E., van der Zwaag, S. & Angerer, P., 12 Nov 2016, (E-pub ahead of print) In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 682.2017, 13 January, p. 117-125 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    Effect of cerium addition on microstructure and mechanical properties of high-strength Fe85Cr4Mo8V2C1 cast steel

    Hufenbach, J., Helth, A., Lee, M. H., Wendrock, H., Giebeler, L., Choe, C. Y., Kim, K. H., Kühn, U., Kim, T. S. & Eckert, J., 30 Sept 2016, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 674.2016, 30 September, p. 366-374 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    Interplay between sample size and grain size: Single crystalline vs. ultrafine-grained chromium micropillars

    Fritz, R., Maier-Kiener, V., Lutz, D. & Kiener, D., 30 Sept 2016, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 674.2016, 30 September, p. 626-633 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    Influence of Ag and Co additions on glass-forming ability, thermal and mechanical properties of Cu–Zr–Al bulk metallic glasses

    Escher, B., Kühn, U., Eckert, J., Rentenberger, C. & Pauly, S., 15 Sept 2016, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 673.2016, 15 September, p. 90-98 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    Laser surface remelting of a Cu-Al-Ni-Mn shape memory alloy

    da Silva, M. R., Gargarella, P., Gustmann, T., Botta Filho, W. J., Kiminami, C. S., Eckert, J., Pauly, S. & Bolfarini, C., 20 Apr 2016, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 661.2016, 20 April, p. 61-67 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  33. E-pub ahead of print

    Comparison of intergranular strain formation of conventional and newly developed nickel based superalloys

    Wagner, J., Hofmann, M., Van Petegem, S., Krempaszky, C., Hoelzel, M. & Stockinger, M., 15 Mar 2016, (E-pub ahead of print) In: Materials Science and Engineering A. 662.2016, 26 April, p. 303-307 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    Deformation and fracture characteristics of ultrafine-grained vanadium

    Hohenwarter, A. & Wurster, S., 2016, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 650, p. 492-496 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Impact of the B2 ordering behavior on the mechanical properties of a Fe Co Mo alloy

    Turk, C., Leitner, H., Kellezi, G., Clemens, H., Gan, W., Staron, P. & Primig, S., 2016, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 662, p. 511-518 8 p., 662.

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    Microstructure Evolution and Mechanical Properties of directionally solidified Mg-xGd (x¼0.8, 1.5,and2.5)alloys

    Luo, S., Yang, G., Liu, S., Wang, J., Li, J. & Jie, W., 2016, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 662, p. 241-250 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    Morphology change of retained austenite during austempering of carbide-freebainiticsteel

    Hofer, C., Winkelhofer, F., Clemens, H. & Primig, S., 2016, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 664, p. 236-246 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    Relationship between mechanical damage and electrical degradation in polymer supported metal films subjected to cyclic loading

    Glushko, O., Klug, A., List-Kratochvil, E. J. W. & Cordill, M., 2016, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing.

    Research output: Contribution to journal › Article › Research › peer-review

  39. 2015
  40. Published

    Designed heterogeneities improve the fracture reliability of a Zr-based bulk metallic glass

    Li, B. S., Shakur Shahabi, H., Scudino, S., Eckert, J. & Kruzic, J. J., 14 Oct 2015, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 646, p. 242-248 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  41. Published

    Revisiting fatigue crack growth in various grain size regimes of Ni

    Leitner, T., Hohenwarter, A. & Pippan, R., 14 Oct 2015, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 646, p. 294-305 12 p., 32705.

    Research output: Contribution to journal › Article › Research › peer-review

  42. E-pub ahead of print

    Characterization of the high temperature deformatin behavior of two intermetallic TiAl-Mo alloys

    Godor, F., Werner, R., Lindemann, J., Clemens, H. & Mayer, S., 18 Sept 2015, (E-pub ahead of print) In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 648.2015, 11 November, p. 208-216 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    Elevated temperature mechanical properties of novel ultra-fine grained Cu-Nb composites

    Primorac, M.-M., Abad, M. D., Hosemann, P., Kreuzeder, M., Maier, V. & Kiener, D., 2015, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 625, p. 296-302

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    Incremental high pressure torsion as a novel severe plastic deformation process: Processing features and application to copper

    Hohenwarter, A., 2015, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 626, p. 80-85

    Research output: Contribution to journal › Article › Research › peer-review

  45. 2014

  46. Microstructure and temperature dependence of intergranular strains on diffractometric macroscopic residual stress analysis

    Wimpory, R., Krempaszky, C. & Stockinger, M., 16 Sept 2014, In: Materials Science and Engineering A. 618, p. 271-279 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    Yield strength prediction in Ni-base alloy 718Plus based on thermo-kinetic precipitation simulation

    Ahmadi, M. R., Povoden-Karadeniz, E., Whitmore, L., Stockinger, M., Falahati, A. & Kozeschnik, E., 1 Jul 2014, In: Materials Science and Engineering A. 608, p. 114-122 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    Comparison of microstructural crack paths between hypo-eutectic Al-Si-Cu and Al-Si-Mg cast alloys in high plasticity regimes under rotating bending

    Huter, P., Winter, G., Renhart, P., Schwab, M., Oberfrank, S., Grün, F. & Stauder, B., 2014, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 618, p. 578-585

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    Hot-working behavior of an advanced intermetallic multi-phase gamma-TiAl based alloy

    Schwaighofer, E., Clemens, H., Lindemann, J., Stark, A. & Mayer, S., 2014, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 614, p. 297-310

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    Microstructural investigation of thermally aged nickel-based superalloy 718Plus

    Whitmore, L., Ahmadi, M. R., Stockinger, M., Povoden-Karadeniz, E., Kozeschnik, E. & Leitner, H., 2014, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 594, p. 253-259

    Research output: Contribution to journal › Article › Research › peer-review

  51. Published

    The microstructure of heat-treated nickel-based superalloy 718Plus

    Whitmore, L., Ahmadi, M. R., Guetaz, L., Leitner, H., Povoden-Karadeniz, E., Stockinger, M. & Kozeschnik, E., 2014, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 610, p. 39-45

    Research output: Contribution to journal › Article › Research › peer-review

  52. 2013
  53. Published

    The influence of microstructure and operating temperature on the fatigue endurance of hot forged Inconel (R) 718 components

    Maderbacher, H., Oberwinkler, B., Gänser, H.-P., Tan, W., Rollett, M. & Stoschka, M., 15 Nov 2013, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 585, p. 123-131

    Research output: Contribution to journal › Article › Research › peer-review

  54. Published

    Activation Parameters for Deformation of Ultrafine-Grained Aluminium as Determined by Indentation Strain Rate Jumps at Elevated Temperature

    Wheeler, J. M., Maier, V., Durst, K., Göken, M. & Michler, J., 2013, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 585, p. 108-113

    Research output: Contribution to journal › Article › Research › peer-review

  55. Published

    Direct or indirect: Influence of type of retained austenite decomposition during tempering on the toughness of a hot-work tool steel

    Lerchbacher, C., Zinner, S. & Leitner, H., 2013, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 564, p. 163-168

    Research output: Contribution to journal › Article › Research › peer-review

  56. Published

    Influence of bulk pre-straining on the size effect in nickel compression pillars

    Schneider, A. S., Kiener, D., Yakacki, C. M., Maier, H. J., Gruber, P. A., Tamura, N., Kunz, M., Minor, A. M. & Frick, C. P., 2013, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 559, p. 147-158 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1 2 3 4 Next
View graph of relations