Materials characterization, ‎1044-5803

Journal

ISSNs1044-5803
1 - 37 out of 37Page size: 50

Research output

  1. 2025
  2. Published

    Tracing non-metallic inclusions in steel with low levels of enriched magnesium stable isotopes: A novel approach

    Thiele, K., Wagner, S., Irrgeher, J., Prohaska, T. & Michelic, S. K., 22 Jan 2025, In: Materials characterization. 221.2025, March, 14 p., 114759.

    Research output: Contribution to journal › Article › Research › peer-review

  3. 2024
  4. Published

    Site-specific femtosecond laser ablation: The pathway to high-throughput atom probe tomography characterization

    Tang, J., Renk, O. & Tkadletz, M., 6 Dec 2024, In: Materials characterization. 219.2025, January, 8 p., 114618.

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    Novel Fe-Mo intermetallic composite synthesized via diffusional-displacive mixed-mode transformation

    Varanasi, R. S., Srikakulapu, K., Utsumi, R., Saitoh, H., Schnitzer, R., Akiyama, E. & Koyama, M., 18 Aug 2024, In: Materials characterization. 216.2024, October, 10 p., 114287.

    Research output: Contribution to journal › Article › Research › peer-review

  6. E-pub ahead of print

    Comparative analysis of experimental techniques for microstructural characterization of novel nanostructured aluminium alloys

    Willenshofer, P., Santa Rosa Coradini, D., Renk, O., Uggowitzer, P., Tunes, M. A. & Pogatscher, S., 11 Jul 2024, (E-pub ahead of print) In: Materials characterization. 215.2024, September, 8 p., 114154.

    Research output: Contribution to journal › Article › Research › peer-review

  7. E-pub ahead of print

    Effect of cold rolling route and annealing on the microstructure and mechanical properties of AISI 316 L stainless steel

    Mohammadzehi, S., Roostaei, M., Mirzadeh, H., Mahmudi, R. & Weißensteiner, I., 9 Jun 2024, (E-pub ahead of print) In: Materials characterization. 214.2024, Ausgust, 10 p., 114072.

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Multimethod cross-sectional characterization approaching the limits of diamond monophase multilayers

    Meindlhumer, M., Grau, J., Sternschulte, H., Halahovets, Y., Siffalovic, P., Burghammer, M., Steinmüller-Nethl, D. & Keckes, J., 13 May 2024, In: Materials characterization. 212.2024, June, 15 p., 113973.

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Agglomerating behavior of in-situ TiB2 particles and strength-ductility synergetic improvement of in-situ TiB2p/7075Al composites through ultrasound vibration

    Wu, Y., Li, L., Kang, H., Guo, E., LI, J., Du, G., Chen, Z. & Wang, T., Feb 2024, In: Materials characterization. 208.2024, February, 10 p., 113652.

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    Multiscale in-situ observations of the micro- and nanostructure of a PH 13-8 Mo maraging steel during austenitization

    Rosenauer, A., Brandl, D., Ressel, G., Hönigmann, T., Stadler, M., Turk, C., Gammer, C., Wiessner, M., Gamsjäger, E., Stockinger, M. & Schnitzer, R., Feb 2024, In: Materials characterization. 208.2024, February, 13 p., 113554.

    Research output: Contribution to journal › Article › Research › peer-review

  11. 2023
  12. Published

    Influence of platform preheating on in situ precipitation in an FeCoMo alloy during laser powder bed fusion

    Cui, C., Leitner, H., Platl, J. & Schnitzer, R., Mar 2023, In: Materials characterization. 197.2023, March, 10 p., 112689.

    Research output: Contribution to journal › Article › Research › peer-review

  13. 2022
  14. Published

    Local microstructural evolution and the role of residual stresses in the phase stability of a laser powder bed fused cold-work tool steel

    Platl, J., Bodner, S. C., Harald, L., Turk, C., Nielsen, M.-A., Keckes, J. & Schnitzer, R., 22 Sept 2022, In: Materials characterization. 193.2022, November, 11 p., 112318.

    Research output: Contribution to journal › Article › Research › peer-review

  15. E-pub ahead of print

    In-situ high-temperature EBSD characterization during a solution heat treatment of hot-rolled Ti-6Al-4V

    Janda, A., Ebenbauer, S., Prestl, A., Siller, I., Clemens, H. & Spörk-Erdely, P., 8 Aug 2022, (E-pub ahead of print) In: Materials characterization. 192.2022, October, 12 p., 112207.

    Research output: Contribution to journal › Article › Research › peer-review

  16. 2021
  17. Published

    Characterization of the gamma-loop in the Fe-P system by coupling DSC and HT-LSCM with complementary in-situ experimental techniques

    Bernhard, M. C., Fuchs, N., Presoly, P., Angerer, P., Friessnegger, B. & Bernhard, C., Apr 2021, In: Materials characterization. 174, April, 17 p., 111030.

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    The effect of grain size on bubble formation and evolution in helium-irradiated Cu-Fe-Ag

    Wurmshuber, M., Frazer, D., Balooch, M., Issa, I., Bachmaier, A., Hosemann, P. & Kiener, D., Jan 2021, In: Materials characterization. 171, 171, 110822.

    Research output: Contribution to journal › Article › Research › peer-review

  19. 2020
  20. Published

    Transient phase fraction and dislocation density estimation from in-situ X-ray diffraction data with a low signal-to-noise ratio using a Bayesian approach to the Rietveld analysis

    Wiessner, M., Angerer, P., van der Zwaag, S. & Gamsjäger, E., 25 Dec 2020, In: Materials characterization. 172.2021, February, 9 p., 110860.

    Research output: Contribution to journal › Article › Research › peer-review

  21. E-pub ahead of print

    Stress-strain Behavior and Microstructural Evolution of Ultra-High Carbon Fe-C-Cr-V-Mo Steel Subjected to Hot Deformation

    Wang, R., Zhang, W., Li, Y., Li, D., Kang, Y., Yang, X., Eckert, J. & Yan, Z., 5 Nov 2020, (E-pub ahead of print) In: Materials characterization. 2021, 110746, 110746.

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Microstructure evolution and fracture behavior of Mg-9.5Gd-0.9Zn-0.5Zr alloy subjected to different heat treatments

    Xiao, L., Yang, G., Ma, J., Qin, H., LI, J. & Jie, W., Oct 2020, In: Materials characterization. 168, 110516.

    Research output: Contribution to journal › Article › Research › peer-review

  23. E-pub ahead of print

    Characterization of carbides in Q&P steels using a combination of high-resolution methods

    Ebner, S., Schnitzer, R., Suppan, C., Stark, A., Liu, H. & Hofer, C., 2 Mar 2020, (E-pub ahead of print) In: Materials characterization. 163.2020, May, 11 p., 110242.

    Research output: Contribution to journal › Article › Research › peer-review

  24. E-pub ahead of print

    Precipitation reactions in a Cu-Ni-Al medium carbon alloyed dual hardening steel

    Hofinger, M., Turk, C., Ognianov, M., Leitner, H. & Schnitzer, R., 9 Jan 2020, (E-pub ahead of print) In: Materials characterization. 160.2020, February, 9 p., 110126.

    Research output: Contribution to journal › Review article › peer-review

  25. 2019
  26. Published

    Precipitation microstructure in Al-Si-Mg-Mn alloy with Zr additions

    Vončina, M., Medved, J., Kores, S., Xie, P., Schumacher, P. & LI, J., Sept 2019, In: Materials characterization. 155.2019, September, 8 p., 109820.

    Research output: Contribution to journal › Article › Research › peer-review

  27. Published

    Evidence of an orthorhombic transition phase in a Ti-44Al-3Mo (at.%) alloy using in situ synchrotron diffraction and transmission electron microscopy

    Musi, M., Erdely, P., Rashkova, B., Clemens, H., Stark, A., Staron, P., Schell, N. & Mayer, S., Jan 2019, In: Materials characterization. 147.2019, January, p. 398-405 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  28. 2018
  29. Published

    High-resolution characterization of the martensite-austenite constituent in a carbide-free bainitic steel

    Hofer, C., Bliznuk, V., Verdiere, A., Petrov, R., Winkelhofer, F., Clemens, H. & Primig, S., 10 Jul 2018, In: Materials characterization. 144.2018, October, p. 182-190 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  30. 2017
  31. Published

    Microstructure evolution and mechanical properties of carbon nanotubes reinforced Al matrix composites

    Liu, X., Li, C., Eckert, J., Prashanth, K. G., Renk, O., Teng, L., Liu, Y., Bao, R., Tao, J., Shen, T. & Yi, J., Nov 2017, In: Materials characterization. 133.2017, November, p. 122-132 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  32. E-pub ahead of print

    Cu segregation on the interface between Al2O3 substrate and Al-1.4Cu alloy

    LI, J., Wang, L., Zhong, X., Xia, M., Haigh, S. & Schumacher, P., 11 May 2017, (E-pub ahead of print) In: Materials characterization. 129.2017, July, p. 300-304 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  33. E-pub ahead of print

    Elemental distribution within the long-period stacking ordered structure in a Mg-Gd-Zn-Mn alloy

    LI, J., Hage, F. S., Zhong, X., Wu, Y., Peng, L., Haigh, S., Ramasse, Q. M. & Schumacher, P., 10 May 2017, (E-pub ahead of print) In: Materials characterization. 129.2017, July, p. 247-251 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  34. E-pub ahead of print

    Heterogeneous nucleation of Al onAlB2 in Al-7Si alloy

    LI, J., Yang, G., Hage, F. S., Chen, Z., Wang, T., Ramasse, Q. & Schumacher, P., 27 Mar 2017, (E-pub ahead of print) In: Materials characterization. 128.2017, June, p. 7-13 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  35. E-pub ahead of print

    Cold pilgering of duplex steel tubes: The response of austenite and ferrite to excessive cold deformation up to high strains

    Ragger, K., Primig, S., Daniel, R., Kaiser, R., Paal, J., Mitterer, C. & Buchmayr, B., 16 Mar 2017, (E-pub ahead of print) In: Materials characterization. 128.2017, June, p. 257–268 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    Precipitation in simultaneously nitrided and aged Mo-containing maraging steel

    Verdiere, A., Hofer, C., De Waele, S., Bliznuk, V., Primig, S., Cottenier, S., Tran, M. D., Pennings, B., Kestens, L. A. I. & Petrov, R., 2017, In: Materials characterization. 131.2017, September, p. 21-30 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  37. 2016
  38. Published

    On the evolution of secondary hardening carbides during continuous versus isothermal heat treatment of high speed steel HS 6-5-2

    Sackl, S. C., Leitner, H., Clemens, H. & Primig, S., 2016, In: Materials characterization. p. 323-330 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  39. 2015
  40. Published

    Correlative characterization of primary Al3(Sc,Zr) phase in an Al-Zn-Mg based alloy

    Li, J. H., Wiessner, M., Albu, M., Wurster, S., Sartory, B., Hofer, F. & Schumacher, P., 1 Jan 2015, In: Materials characterization. 102, p. 62-70 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  41. Published

    Characterization of TiN, TiC and Ti(C,N) in titanium-alloyed ferritic chromium steels focusing on the significance of different particle morphologies

    Michelic, S., Loder, D., Reip, T., Ardehali Barani, A. & Bernhard, C., 2015, In: Materials characterization. 100, p. 61-67

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    Structural characterization of "carbide-free" bainite in a Fe-0.2C-1.5Si-2.5Mn steel

    Hofer, C., Harald, L., Winkelhofer, F., Clemens, H. & Primig, S., 2015, In: Materials characterization. 102, p. 85-91

    Research output: Contribution to journal › Article › Research › peer-review

  43. 2014
  44. Published

    Atom probe study of grain boundary segregation on technically pure molybdenum

    Babinsky, K., Weidow, J., Knabl, W., Lorich, A., Leitner, H. & Primig, S., 2014, In: Materials characterization. 87, p. 95-103

    Research output: Contribution to journal › Article › Research › peer-review

  45. 2013
  46. Published

    Metallographic characterization of the molybdenum based alloy MHC by a color etching technique

    Pöhl, C., Schatte, J. & Leitner, H., 2013, In: Materials characterization. 77, p. 63-69

    Research output: Contribution to journal › Article › Research › peer-review

  47. 2011
  48. Published

    A methodology to study crystal plasticity inside a compression test sample based on image correlation and EBSD

    Rehrl, C., Kleber, S., Antretter, T. & Pippan, R., 2011, In: Materials characterization. p. 793-800

    Research output: Contribution to journal › Article › Research › peer-review

  49. 2009
  50. Published

    Microscopic techniques to study Roman renders and mural paintings from various sites

    Weber, J., Prochaska, W. & Zimmermann, N., 2009, In: Materials characterization. 60, p. 586-593

    Research output: Contribution to journal › Article › Research › peer-review

  51. 2008
  52. Published

    Austenite grain size in the continuous casting process: Metallographic methods and evaluation

    Reiter, J., Bernhard, C. & Presslinger, H., 2008, In: Materials characterization. 59, p. 737-746

    Research output: Contribution to journal › Article › Research › peer-review

  53. Published

    In-situ small-angle X-ray scattering study of the precipitation behavior in a Fe-25 at.%Co-9 at.%Mo alloy

    Zickler, G., Eidenberger, E., Leitner, H., Stergar, E., Clemens, H., Staron, P., Lippmann, T. & Schreyer, A., 2008, In: Materials characterization. 59, p. 1809-1813

    Research output: Contribution to journal › Article › Research › peer-review

View graph of relations