Materials characterization, ‎1044-5803

Journal

ISSNs1044-5803
1 - 20 out of 37Page size: 20

Research output

  1. 2025
  2. Published

    Tracing non-metallic inclusions in steel with low levels of enriched magnesium stable isotopes: A novel approach

    Thiele, K., Wagner, S., Irrgeher, J., Prohaska, T. & Michelic, S. K., 22 Jan 2025, In: Materials characterization. 221.2025, March, 14 p., 114759.

    Research output: Contribution to journal › Article › Research › peer-review

  3. 2024
  4. Published

    Site-specific femtosecond laser ablation: The pathway to high-throughput atom probe tomography characterization

    Tang, J., Renk, O. & Tkadletz, M., 6 Dec 2024, In: Materials characterization. 219.2025, January, 8 p., 114618.

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    Novel Fe-Mo intermetallic composite synthesized via diffusional-displacive mixed-mode transformation

    Varanasi, R. S., Srikakulapu, K., Utsumi, R., Saitoh, H., Schnitzer, R., Akiyama, E. & Koyama, M., 18 Aug 2024, In: Materials characterization. 216.2024, October, 10 p., 114287.

    Research output: Contribution to journal › Article › Research › peer-review

  6. E-pub ahead of print

    Comparative analysis of experimental techniques for microstructural characterization of novel nanostructured aluminium alloys

    Willenshofer, P., Santa Rosa Coradini, D., Renk, O., Uggowitzer, P., Tunes, M. A. & Pogatscher, S., 11 Jul 2024, (E-pub ahead of print) In: Materials characterization. 215.2024, September, 8 p., 114154.

    Research output: Contribution to journal › Article › Research › peer-review

  7. E-pub ahead of print

    Effect of cold rolling route and annealing on the microstructure and mechanical properties of AISI 316 L stainless steel

    Mohammadzehi, S., Roostaei, M., Mirzadeh, H., Mahmudi, R. & Weißensteiner, I., 9 Jun 2024, (E-pub ahead of print) In: Materials characterization. 214.2024, Ausgust, 10 p., 114072.

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Multimethod cross-sectional characterization approaching the limits of diamond monophase multilayers

    Meindlhumer, M., Grau, J., Sternschulte, H., Halahovets, Y., Siffalovic, P., Burghammer, M., Steinmüller-Nethl, D. & Keckes, J., 13 May 2024, In: Materials characterization. 212.2024, June, 15 p., 113973.

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Agglomerating behavior of in-situ TiB2 particles and strength-ductility synergetic improvement of in-situ TiB2p/7075Al composites through ultrasound vibration

    Wu, Y., Li, L., Kang, H., Guo, E., LI, J., Du, G., Chen, Z. & Wang, T., Feb 2024, In: Materials characterization. 208.2024, February, 10 p., 113652.

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    Multiscale in-situ observations of the micro- and nanostructure of a PH 13-8 Mo maraging steel during austenitization

    Rosenauer, A., Brandl, D., Ressel, G., Hönigmann, T., Stadler, M., Turk, C., Gammer, C., Wiessner, M., Gamsjäger, E., Stockinger, M. & Schnitzer, R., Feb 2024, In: Materials characterization. 208.2024, February, 13 p., 113554.

    Research output: Contribution to journal › Article › Research › peer-review

  11. 2023
  12. Published

    Influence of platform preheating on in situ precipitation in an FeCoMo alloy during laser powder bed fusion

    Cui, C., Leitner, H., Platl, J. & Schnitzer, R., Mar 2023, In: Materials characterization. 197.2023, March, 10 p., 112689.

    Research output: Contribution to journal › Article › Research › peer-review

  13. 2022
  14. Published

    Local microstructural evolution and the role of residual stresses in the phase stability of a laser powder bed fused cold-work tool steel

    Platl, J., Bodner, S. C., Harald, L., Turk, C., Nielsen, M.-A., Keckes, J. & Schnitzer, R., 22 Sept 2022, In: Materials characterization. 193.2022, November, 11 p., 112318.

    Research output: Contribution to journal › Article › Research › peer-review

  15. E-pub ahead of print

    In-situ high-temperature EBSD characterization during a solution heat treatment of hot-rolled Ti-6Al-4V

    Janda, A., Ebenbauer, S., Prestl, A., Siller, I., Clemens, H. & Spörk-Erdely, P., 8 Aug 2022, (E-pub ahead of print) In: Materials characterization. 192.2022, October, 12 p., 112207.

    Research output: Contribution to journal › Article › Research › peer-review

  16. 2021
  17. Published

    Characterization of the gamma-loop in the Fe-P system by coupling DSC and HT-LSCM with complementary in-situ experimental techniques

    Bernhard, M. C., Fuchs, N., Presoly, P., Angerer, P., Friessnegger, B. & Bernhard, C., Apr 2021, In: Materials characterization. 174, April, 17 p., 111030.

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    The effect of grain size on bubble formation and evolution in helium-irradiated Cu-Fe-Ag

    Wurmshuber, M., Frazer, D., Balooch, M., Issa, I., Bachmaier, A., Hosemann, P. & Kiener, D., Jan 2021, In: Materials characterization. 171, 171, 110822.

    Research output: Contribution to journal › Article › Research › peer-review

  19. 2020
  20. Published

    Transient phase fraction and dislocation density estimation from in-situ X-ray diffraction data with a low signal-to-noise ratio using a Bayesian approach to the Rietveld analysis

    Wiessner, M., Angerer, P., van der Zwaag, S. & Gamsjäger, E., 25 Dec 2020, In: Materials characterization. 172.2021, February, 9 p., 110860.

    Research output: Contribution to journal › Article › Research › peer-review

  21. E-pub ahead of print

    Stress-strain Behavior and Microstructural Evolution of Ultra-High Carbon Fe-C-Cr-V-Mo Steel Subjected to Hot Deformation

    Wang, R., Zhang, W., Li, Y., Li, D., Kang, Y., Yang, X., Eckert, J. & Yan, Z., 5 Nov 2020, (E-pub ahead of print) In: Materials characterization. 2021, 110746, 110746.

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Microstructure evolution and fracture behavior of Mg-9.5Gd-0.9Zn-0.5Zr alloy subjected to different heat treatments

    Xiao, L., Yang, G., Ma, J., Qin, H., LI, J. & Jie, W., Oct 2020, In: Materials characterization. 168, 110516.

    Research output: Contribution to journal › Article › Research › peer-review

  23. E-pub ahead of print

    Characterization of carbides in Q&P steels using a combination of high-resolution methods

    Ebner, S., Schnitzer, R., Suppan, C., Stark, A., Liu, H. & Hofer, C., 2 Mar 2020, (E-pub ahead of print) In: Materials characterization. 163.2020, May, 11 p., 110242.

    Research output: Contribution to journal › Article › Research › peer-review

  24. E-pub ahead of print

    Precipitation reactions in a Cu-Ni-Al medium carbon alloyed dual hardening steel

    Hofinger, M., Turk, C., Ognianov, M., Leitner, H. & Schnitzer, R., 9 Jan 2020, (E-pub ahead of print) In: Materials characterization. 160.2020, February, 9 p., 110126.

    Research output: Contribution to journal › Review article › peer-review

  25. 2019
  26. Published

    Precipitation microstructure in Al-Si-Mg-Mn alloy with Zr additions

    Vončina, M., Medved, J., Kores, S., Xie, P., Schumacher, P. & LI, J., Sept 2019, In: Materials characterization. 155.2019, September, 8 p., 109820.

    Research output: Contribution to journal › Article › Research › peer-review

  27. Published

    Evidence of an orthorhombic transition phase in a Ti-44Al-3Mo (at.%) alloy using in situ synchrotron diffraction and transmission electron microscopy

    Musi, M., Erdely, P., Rashkova, B., Clemens, H., Stark, A., Staron, P., Schell, N. & Mayer, S., Jan 2019, In: Materials characterization. 147.2019, January, p. 398-405 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1 2 Next
View graph of relations