International Journal of Fatigue, ‎0142-1123

Journal

ISSNs0142-1123
1 - 56 out of 56Page size: 100

Research output

  1. 2025
  2. Published

    Very high cycle fatigue properties of short glass fiber reinforced polyetheretherketone (PEEK)

    Fitzka, M., Stadler, G., Schönbauer, B. M., Pinter, G. & Mayer, H., Jan 2025, In: International Journal of Fatigue. 190.2025, January, 8 p., 108652.

    Research output: Contribution to journal › Article › Research › peer-review

  3. 2024
  4. Published

    Fatigue investigations of elastomers developed for high-pressure hydrogen gas environments

    Schieppati, J., Balasooriya, W., Huber, P. A. H. & Pinter, G., 19 Aug 2024, In: International Journal of Fatigue. 189.2024, December, 10 p., 108563.

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    On the fatigue crack growth behavior of nanocrystalline CrMnFeCoNi

    Pillmeier, S., Burtscher, M., Laplanche, G., Pippan, R., Eckert, J. & Hohenwarter, A., 31 Jul 2024, In: International Journal of Fatigue. 188.2024, November, 11 p., 108530.

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    Refined cyclic R-curve determination through residual crack tip stress reduction by annealing

    Walch, L., Klünsner, T., Ressel, G., Marsoner, S. M., Pippan, R., Hackl, A., Leitner, H. & Hohenwarter, A., 27 Jun 2024, In: International Journal of Fatigue. 187.2024, October, 108480.

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Influence of corrosion fatigue on the stress gradient effect of the aluminium alloy EN AW-6082 T6

    Schönowitz, M., Maier, B. & Grün, F., 9 Apr 2024, In: International Journal of Fatigue. 184.2024, July, 10 p., 108322.

    Research output: Contribution to journal › Article › Research › peer-review

  8. 2023
  9. Published

    Deformation and fatigue behaviour of additively manufactured Scalmalloy® with bimodal microstructure

    Schimbäck, D., Kaserer, L., Mair, P., Palm, F., Leichtfried, G. J., Pogatscher, S. & Hohenwarter, A., Jul 2023, In: International Journal of Fatigue. 172.2023, July, 14 p., 107592.

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    Comparing crack density and dissipated energy as measures for off-axis damage in composite laminates

    Drvoderic, M., Gfrerrer, M., Wiener, J., Pinter, G. G., Pletz, M. & Schuecker, C., Apr 2023, In: International Journal of Fatigue. 169.2023, April, 10 p., 107486.

    Research output: Contribution to journal › Article › Research › peer-review

  11. 2022
  12. Published

    Effect of a single overload on the cyclic R-curve behaviour of a γ-TiAl TNM alloy

    Lintner, A., Pippan, R., Schloffer, M. & Hohenwarter, A., Oct 2022, In: International Journal of Fatigue. 163.2022, October, 8 p., 107083.

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Fatigue strength study based on geometric shape of bulk defects in cast steel

    Horvath, M., Stoschka, M. & Fladischer, S., Oct 2022, In: International Journal of Fatigue. 163.2022, October, 9 p., 107082.

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    VHCF properties and assessment of specimens and thin-walled component-like structures made of high-strength steel X5CrNiCuNb16-4

    Himmelbauer, F., Winter, G., Grün, F. & Kiesling, C., 19 Feb 2022, In: International Journal of Fatigue. 156.2022, March, 10 p., 106645.

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Artificial intelligence assisted fatigue failure prediction

    Schneller, W., Leitner, M., Maier, B., Grün, F., Jantschner, O., Leuders, S. & Pfeifer, T., Feb 2022, In: International Journal of Fatigue. 155.2022, February, 7 p., 106580.

    Research output: Contribution to journal › Article › Research › peer-review

  16. 2021
  17. Published

    Novel S-N curve for different hardened layers in point and line contact

    Trausmuth, A. & Grün, F., Dec 2021, In: International Journal of Fatigue. 153.2021, December, 16 p., 106439.

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    A novel high-frequency fatigue testing methodology for small thin-walled structures in the HCF/VHCF regime

    Himmelbauer, F., Tillmanns, M., Winter, G., Grün, F. & Kiesling, C., May 2021, In: International Journal of Fatigue. 146, 146, 10 p., 106146.

    Research output: Contribution to journal › Article › Research › peer-review

  19. 2020
  20. Published

    Fatigue characterization of polyethylene under mixed mode I/III conditions

    Gosch, A., Arbeiter, F., Berer, M., Vojtek, T., Hutař, P. & Pinter, G. G., 15 Dec 2020, In: International Journal of Fatigue. 145.2021, April, 13 p., 106084.

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    Temperature impact on the mechanical and fatigue behavior of a non-crystallizing rubber

    Schieppati, J., Schrittesser, B., Wondracek, A., Robin, S., Holzner, A. & Pinter, G., 23 Nov 2020, In: International Journal of Fatigue. 144.2021, March, 8 p., 106050.

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Effect of load stress ratio on nominal and effective notch fatigue strength assessment of HFMI-treated high-strength steel cover plates

    Leitner, M. & Stoschka, M., 1 Oct 2020, In: International Journal of Fatigue. 139, October, 7 p., 105784.

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Modelling the effect of ageing on the yield strength of an aluminium alloy under cyclic loading at different ageing temperatures and test temperatures

    Seisenbacher, B., Winter, G. & Grün, F., 13 Apr 2020, In: International Journal of Fatigue. 137.2021, August, 9 p., 105635.

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    Fatigue crack growth model including load sequence effects – Model development and calibration for railway axle steels

    Maierhofer, J., Gänser, H. P., Simunek, D., Leitner, M., Pippan, R. & Luke, M., 1 Mar 2020, In: International Journal of Fatigue. 132.2020, March, 11 p., 105377.

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    Local strain energy density approach to assess the fatigue strength of sharp and blunt V-notches in cast steel

    Schuscha, M., Leitner, M., Stoschka, M. & Meneghetti, G., 1 Mar 2020, In: International Journal of Fatigue. 132.2020, March, 105334.

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    Investigation of fibre orientation and notch support of short glass fibre lot reinforced thermoplastics

    Stadler, G., Primetzhofer, A., Pinter, G. & Grün, F., 1 Feb 2020, In: International Journal of Fatigue. 131.2020, February, 8 p., 105284.

    Research output: Contribution to journal › Article › Research › peer-review

  27. 2019
  28. Published

    Areal fatigue strength assessment of cast aluminium surface layers

    Pomberger, S., Stoschka, M., Aigner, R., Leitner, M. & Ehart, R., 20 Dec 2019, In: International Journal of Fatigue. 133.2020, April, 11 p., 105423.

    Research output: Contribution to journal › Article › Research › peer-review

  29. E-pub ahead of print

    Fatigue crack growth in railway axle specimens – Transferability and model validation

    Simunek, D., Leitner, M., Rieger, M., Pippan, R., Gänser, H.-P. & Weber, F. J., 12 Dec 2019, (E-pub ahead of print) In: International Journal of Fatigue. 133.2020, 14 p., 105421.

    Research output: Contribution to journal › Article › Research › peer-review

  30. E-pub ahead of print

    Mixed Mode I/III fatigue fracture characterization of Polyoxymethylene

    Gosch, A., Berer, M., Hutař, P., Slavik, O., Vojtek, T., Arbeiter, F. & Pinter, G. G., 13 Sept 2019, (E-pub ahead of print) In: International Journal of Fatigue. 130.2020, January, p. 105269 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    Investigation of high cyclic fatigue behaviour of thin copper films using MEMS structure

    Saghaeian, F., Lederer, M., Hofer, A., Todt, J., Keckes, J. & Khatibi, G., 19 Jul 2019, In: International Journal of Fatigue. 128.2019, November, 8 p., 105179.

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    Lifetime assessment of anisotropic materials by the example short fibre reinforced plastic

    Primetzhofer, A., Stadler, G., Pinter, G. & Grün, F., 1 Mar 2019, In: International Journal of Fatigue. 120.2019, March, p. 294-302 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    Anisotropy in fracture and fatigue resistance of pearlitic steels and its effect on the crack path

    Leitner, T., Hohenwarter, A. & Pippan, R., 28 Feb 2019, In: International Journal of Fatigue. 124.2019, July, p. 528-536 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  34. 2018
  35. Published

    Oxide induced crack closure in the near threshold regime: The effect of oxide debris release

    Maierhofer, J., Simunek, D., Gänser, H. P. & Pippan, R., 1 Dec 2018, In: International Journal of Fatigue. 117, p. 21-26 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    Validation of a new high frequency testing technique in the VHCF regime – Fatigue properties of a 42CrMoS4 and X5CrNiCuNb16-4 steel

    Milošević, I., Renhart, P., Winter, G., Grün, F. & Kober, M., 1 Jul 2018, In: International Journal of Fatigue. 112, p. 198-205 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    Application of modified Kitagawa-Takahashi diagram for fatigue strength assessment of cast Al-Si-Cu alloys

    Garb, C., Leitner, M., Stauder, B., Schnubel, D. & Grün, F., 1 Jun 2018, In: International Journal of Fatigue. 111, p. 256-268 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  38. 2017
  39. Published

    Statistical size effect on multiaxial fatigue strength of notched steel components

    Leitner, M., Vormwald, M. & Remes, H., 1 Nov 2017, In: International Journal of Fatigue. 104.2017, November, p. 322-333 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    Influence of effective stress ratio on the fatigue strength of welded and HFMI-treated high-strength steel joints

    Leitner, M., 1 Sept 2017, In: International Journal of Fatigue. 102.2017, September, p. 158-170 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  41. Published

    Fatigue assessment of welded and high frequency mechanical impact (HFMI) treated joints by master notch stress approach

    Leitner, M., Stoschka, M. & Ottersböck, M., 1 Aug 2017, In: International Journal of Fatigue. 101.2017, August, Part 2, p. 232-243 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  42. E-pub ahead of print

    A new high frequency testing method for steels under tension/compression loading in the VHCF regime

    Milosevic, I., Renhart, P., Winter, G., Grün, F. & Kober, M., 17 Jul 2017, (E-pub ahead of print) In: International Journal of Fatigue. 104.2017, November, p. 150-157 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    Multiaxial fatigue strength assessment of electroslag remelted 50CrMo4 steel crankshafts

    Leitner, M., Tuncali, Z., Steiner, R. & Grün, F., 1 Jul 2017, In: International Journal of Fatigue. 100.2017, July, Part 1, p. 159-175 17 p.

    Research output: Contribution to journal › Article › Research › peer-review

  44. 2016
  45. Published

    Experimental evidence of a common local mode II growth mechanism of fatigue cracks loaded in modes II, III and II + III in niobium and titanium

    Vojtek, T., Hohenwarter, A., Pippan, R. & Pokluda, J., 1 Nov 2016, In: International Journal of Fatigue. 92.2016, Part 2, November, p. 470-477 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  46. E-pub ahead of print

    Dynamic mechanical response of polyetheretherketone (PEEK) exposed to cyclic loads in the high stress tensile regime

    Berer, M., Tscharnuter, D. & Pinter, G., 3 Jul 2016, (E-pub ahead of print) In: International Journal of Fatigue. 80.2015, October, p. 397-405 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    Thermo-mechanical fatigue influence of copper and silicon on hypo-eutectic Al–Si–Cu and Al–Si–Mg cast alloys used in cylinder heads

    Huter, P., Oberfrank, S., Grün, F. & Stauder, B., Jul 2016, In: International Journal of Fatigue. 88.2016, July, p. 144-155 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    Fatigue life prediction method for the practical engineering use taking in account the effect of the overload blocks

    Theil, N., 9 Apr 2016, In: International Journal of Fatigue. 90.2016, September, p. 23-35 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    Cyclic fatigue delamination of carbon fiber-reinforced polymer-matrix composites: Data analysis and design considerations

    Brunner, A. J., Stelzer, S., Pinter, G. G. & Terrasi, G. P., Feb 2016, In: International Journal of Fatigue. 83.2016, Part 2, February, p. 293-299 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    High- and low-cycle fatigue influence of silicon, copper, strontium and iron on hypo-eutectic Al-Si-Cu and Al-Si-Mg cast alloys used in cylinder heads

    Huter, P., Renhart, P., Oberfrank, S., Schwab, M., Grün, F. & Stauder, B., 1 Jan 2016, In: International Journal of Fatigue. 82.2016, January, Part 3, p. 588-601 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  51. 2015
  52. Published

    Progress in understanding of intrinsic resistance to shear-mode fatigue crack growth in metallic materials

    Vojtek, T., Pokluda, J., Hohenwarter, A. & Pippan, R., 4 Oct 2015, In: International Journal of Fatigue. 89, p. 36-42 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  53. Published

    Fatigue behaviour of composite-composite joints reinforced with cold metal transfer welded pins

    Stelzer, S., Ucsnik, S. & Pinter, G., 16 Jul 2015, In: International Journal of Fatigue. 81.2015, December, p. 37-47 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  54. E-pub ahead of print

    Effects of mean stress and fibre volume content on the fatigue-induced damage mechanisms in CFRP

    Maier, J. & Pinter, G., 7 Feb 2015, (E-pub ahead of print) In: International Journal of Fatigue. 75.2015, June, p. 28-38 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  55. 2014
  56. Published

    Mechanical properties, fatigue damage and microstructure of carbon/epoxy laminates depending on fibre volume content

    Brunbauer, J., Pinter, G. & Stadler, H., 2014, In: International Journal of Fatigue. 70, p. 85-92

    Research output: Contribution to journal › Article › Research › peer-review

  57. 2013
  58. Published

    Mode II fatigue delamination resistance of advanced fiber-reinforced polymer–matrix laminates: Towards the development of a standardized test procedure

    Brunner, A., Stelzer, S., Pinter, G. & Terrasi, G. P., 2013, In: International Journal of Fatigue. 50, p. 57-62

    Research output: Contribution to journal › Article › Research › peer-review

  59. 2011
  60. Published

    Multiscale Fatigue Crack Observations on Ti-6Al-4V

    Oberwinkler, B., Lettner, A. & Eichlseder, W., 2011, In: International Journal of Fatigue. 33, p. 710-718

    Research output: Contribution to journal › Article › Research › peer-review

  61. 2010
  62. Published

    Discrete dislocation modelling of near threshold fatigue crack propagation

    Pippan, R. & Weinhandl, H., 2010, In: International Journal of Fatigue. p. 1503-1510

    Research output: Contribution to journal › Article › Research › peer-review

  63. Published

    Fatigue crack propagation in threshold regime under residual stresses

    Pippan, R., Predan, J. & Gubeljak, N., 2010, In: International Journal of Fatigue. p. 1050-1056

    Research output: Contribution to journal › Article › Research › peer-review

  64. Published

    Importance of local microstructure for damage tolerant light weight design of Ti-6Al-4V forgings

    Oberwinkler, B., Riedler, M. & Eichlseder, W., 2010, In: International Journal of Fatigue. 32, p. 808-814

    Research output: Contribution to journal › Article › Research › peer-review

  65. 2008
  66. Published

    The effect of machining on the surface integrity and fatigue life

    Javidi, A., Rieger, U. & Eichlseder, W., 2008, In: International Journal of Fatigue. 30, p. 2050-2055

    Research output: Contribution to journal › Article › Research › peer-review

  67. 2007
  68. Published

    New testing procedure to determine da/dN-Delta K curves at different, constant R-values using one single specimen

    Tesch, A., Pippan, R. & Döker, H., 2007, In: International Journal of Fatigue. 29, p. 1220-1228

    Research output: Contribution to journal › Article › Research › peer-review

  69. 2006
  70. Published

    Characterisation of the tensile fatigue behaviour of RTM-laminates by isocyclic stress-strain-diagrams

    Pinter, G., Ladstätter, E., Billinger, W. & Lang, R. W., Oct 2006, In: International Journal of Fatigue. 28, 10 SPEC. ISS., p. 1277-1283 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  71. Published

    Characterization of the tensile fatigue behaviour of RTM-laminates by isocyclic stress-strain diagrams

    Pinter, G., Ladstätter, E., Billinger, W. & Lang, R., 2006, In: International Journal of Fatigue. p. 1277-1283

    Research output: Contribution to journal › Article › Research › peer-review

  72. Published

    Infrared thermographic techniques for non-destructive damage characterization of carbon fibre reinforced polymers during tensile fatigue testing

    Steinberger, R., Leitao, T. I. V., Ladstätter, E., Billinger, W., Pinter, G. & Lang, R., 2006, In: International Journal of Fatigue. p. 1340-1347

    Research output: Contribution to journal › Article › Research › peer-review

  73. 2005
  74. Published

    Fatigue crack propagation in cellular metals

    Motz, C., Friedl, O. & Pippan, R., 2005, In: International Journal of Fatigue. 27, p. 1571-1581

    Research output: Contribution to journal › Article › Research › peer-review

  75. 2004
  76. Published

    Effect of periodic overloads in particle reinforced aluminum alloys: the near threshold behavior

    Tabernig, B. & Pippan, R., 2004, In: International Journal of Fatigue. 26, p. 323-330

    Research output: Contribution to journal › Article › Research › peer-review

View graph of relations