Treatment of carbon electrodes with Ti3C2Tx MXene coating and thermal method for vanadium redox flow batteries: a comparative study

Publikationen: Beitrag in FachzeitschriftArtikelForschung(peer-reviewed)

Standard

Treatment of carbon electrodes with Ti3C2Tx MXene coating and thermal method for vanadium redox flow batteries: a comparative study. / Teenakul, Kavin; Alem, Sayed Ali Ahmad; Gond, Ritambhara et al.
in: RSC Advances, Jahrgang 14.2024, Nr. 18, 19.04.2024, S. 12807-12816.

Publikationen: Beitrag in FachzeitschriftArtikelForschung(peer-reviewed)

Vancouver

Teenakul K, Alem SAA, Gond R, Thakur A, Anasori B, Khataee A. Treatment of carbon electrodes with Ti3C2Tx MXene coating and thermal method for vanadium redox flow batteries: a comparative study. RSC Advances. 2024 Apr 19;14.2024(18):12807-12816. doi: 10.1039/D4RA01380H

Bibtex - Download

@article{c22b6aaad0044039998db5a4251e57f6,
title = "Treatment of carbon electrodes with Ti3C2Tx MXene coating and thermal method for vanadium redox flow batteries: a comparative study",
abstract = "One of the significant challenges of vanadium redox flow batteries is connected to the negative electrode where the main reaction of V(II)/V(III) and the side reaction of hydrogen evolution compete. To address this issue, we used titanium carbide (Ti3C2Tx) MXene coating via drop-casting to introduce oxygen functional groups and metals on the carbon electrode surface. Characterization through scanning electron microscopy and X-ray photoelectron spectroscopy confirmed the even distribution of Ti3C2Tx MXene on the electrodes and the presence of titanium and termination groups (–O, –Cl, and –F). The cyclic voltammetry analysis of MXene-coated electrodes showed more sharp electrochemical peaks for the V(II)/V(III) reaction than thermal-treated electrodes, even at relatively high scan rates. Notably, a relatively high reaction rate of 5.61 × 10−4 cm s−1 was achieved for the V(II)/V(III) reaction on MXene-coated electrodes, which shows the competitiveness of the method compared to thermal treatment (4.17 × 10−4 cm s−1). The flow battery tests, at a current density of 130 mA cm−2, using MXene-coated electrodes showed pretty stable discharge capacity for over 100 cycles. In addition, the voltage and energy efficiency were significantly higher than those of the system using untreated electrodes. Overall, this work highlights the potential application of MXene coating in carbon electrode treatment for vanadium redox flow batteries due to remarkable electrocatalytic activity and battery performance, providing a competitive method for thermal treatment.",
keywords = "Redox Flow Battery, Carbon Materials, MXene, 2D Materials, Surface Chemistry, Functionalization",
author = "Kavin Teenakul and Alem, {Sayed Ali Ahmad} and Ritambhara Gond and Anupma Thakur and Babak Anasori and Amirreza Khataee",
note = "Publisher Copyright: {\textcopyright} 2024 The Royal Society of Chemistry.",
year = "2024",
month = apr,
day = "19",
doi = "10.1039/D4RA01380H",
language = "English",
volume = "14.2024",
pages = "12807--12816",
journal = "RSC Advances",
issn = "2046-2069",
publisher = "Royal Society of Chemistry",
number = "18",

}

RIS (suitable for import to EndNote) - Download

TY - JOUR

T1 - Treatment of carbon electrodes with Ti3C2Tx MXene coating and thermal method for vanadium redox flow batteries: a comparative study

AU - Teenakul, Kavin

AU - Alem, Sayed Ali Ahmad

AU - Gond, Ritambhara

AU - Thakur, Anupma

AU - Anasori, Babak

AU - Khataee, Amirreza

N1 - Publisher Copyright: © 2024 The Royal Society of Chemistry.

PY - 2024/4/19

Y1 - 2024/4/19

N2 - One of the significant challenges of vanadium redox flow batteries is connected to the negative electrode where the main reaction of V(II)/V(III) and the side reaction of hydrogen evolution compete. To address this issue, we used titanium carbide (Ti3C2Tx) MXene coating via drop-casting to introduce oxygen functional groups and metals on the carbon electrode surface. Characterization through scanning electron microscopy and X-ray photoelectron spectroscopy confirmed the even distribution of Ti3C2Tx MXene on the electrodes and the presence of titanium and termination groups (–O, –Cl, and –F). The cyclic voltammetry analysis of MXene-coated electrodes showed more sharp electrochemical peaks for the V(II)/V(III) reaction than thermal-treated electrodes, even at relatively high scan rates. Notably, a relatively high reaction rate of 5.61 × 10−4 cm s−1 was achieved for the V(II)/V(III) reaction on MXene-coated electrodes, which shows the competitiveness of the method compared to thermal treatment (4.17 × 10−4 cm s−1). The flow battery tests, at a current density of 130 mA cm−2, using MXene-coated electrodes showed pretty stable discharge capacity for over 100 cycles. In addition, the voltage and energy efficiency were significantly higher than those of the system using untreated electrodes. Overall, this work highlights the potential application of MXene coating in carbon electrode treatment for vanadium redox flow batteries due to remarkable electrocatalytic activity and battery performance, providing a competitive method for thermal treatment.

AB - One of the significant challenges of vanadium redox flow batteries is connected to the negative electrode where the main reaction of V(II)/V(III) and the side reaction of hydrogen evolution compete. To address this issue, we used titanium carbide (Ti3C2Tx) MXene coating via drop-casting to introduce oxygen functional groups and metals on the carbon electrode surface. Characterization through scanning electron microscopy and X-ray photoelectron spectroscopy confirmed the even distribution of Ti3C2Tx MXene on the electrodes and the presence of titanium and termination groups (–O, –Cl, and –F). The cyclic voltammetry analysis of MXene-coated electrodes showed more sharp electrochemical peaks for the V(II)/V(III) reaction than thermal-treated electrodes, even at relatively high scan rates. Notably, a relatively high reaction rate of 5.61 × 10−4 cm s−1 was achieved for the V(II)/V(III) reaction on MXene-coated electrodes, which shows the competitiveness of the method compared to thermal treatment (4.17 × 10−4 cm s−1). The flow battery tests, at a current density of 130 mA cm−2, using MXene-coated electrodes showed pretty stable discharge capacity for over 100 cycles. In addition, the voltage and energy efficiency were significantly higher than those of the system using untreated electrodes. Overall, this work highlights the potential application of MXene coating in carbon electrode treatment for vanadium redox flow batteries due to remarkable electrocatalytic activity and battery performance, providing a competitive method for thermal treatment.

KW - Redox Flow Battery

KW - Carbon Materials

KW - MXene

KW - 2D Materials

KW - Surface Chemistry

KW - Functionalization

UR - http://www.scopus.com/inward/record.url?scp=85190960584&partnerID=8YFLogxK

U2 - 10.1039/D4RA01380H

DO - 10.1039/D4RA01380H

M3 - Article

VL - 14.2024

SP - 12807

EP - 12816

JO - RSC Advances

JF - RSC Advances

SN - 2046-2069

IS - 18

ER -