Thermal stress analysis and structural optimization of ladle nozzle based on finite element simulation

Publikationen: Beitrag in FachzeitschriftArtikelForschung(peer-reviewed)

Standard

Thermal stress analysis and structural optimization of ladle nozzle based on finite element simulation. / Rong, Zichao; Yi, Jianhong; Li, Fengxian et al.
in: Materials Research Express, Jahrgang 9.2022, Nr. 4, 045601, 14.04.2022.

Publikationen: Beitrag in FachzeitschriftArtikelForschung(peer-reviewed)

Vancouver

Author

Rong, Zichao ; Yi, Jianhong ; Li, Fengxian et al. / Thermal stress analysis and structural optimization of ladle nozzle based on finite element simulation. in: Materials Research Express. 2022 ; Jahrgang 9.2022, Nr. 4.

Bibtex - Download

@article{1053f3d255044cc7956b72dc3a5afc1e,
title = "Thermal stress analysis and structural optimization of ladle nozzle based on finite element simulation",
abstract = "The ladle nozzle is one of the most important components in metal smelting. The cracking phenomenon occurs due to excessive thermal stress, which seriously affects the performance and life of the ladle nozzle. In this paper, a new composite structure of ladle nozzle is proposed, which consists of two materials with different properties and costs. The thermal physical parameters of the material are measured by high temperature dynamic Young's modulus test method, thermal expansion test and flashing method. Based on the new structural model of the composite ladle nozzle, finite element simulation is used to combine the material ontology model, contact mechanics model and heat transfer model to study the temperature and thermal stress distribution inside the composite structure of the ladle nozzle during the casting process by taking representative key points inside the ladle nozzle. There is a large temperature gradient in the area near the casting hole, and the farther away from the casting hole, the smaller the temperature change. The ladle nozzle structure was optimized and compared with the existing ladle nozzle structure. The results show that the optimized composite structure of the ladle nozzle has significantly lowered thermal stress extremes under thermal shock, while the thermal stress distribution tends to be more uniform, which can largely reduce the chance of crack generation. This study is of great significance for improving the reliability and service life of the ladle nozzle and reducing its production cost.",
keywords = "finite elements, refractory, simulation, structural optimization",
author = "Zichao Rong and Jianhong Yi and Fengxian Li and Yichun Liu and J{\"u}rgen Eckert",
note = "Publisher Copyright: {\textcopyright} 2022 The Author(s). Published by IOP Publishing Ltd.",
year = "2022",
month = apr,
day = "14",
doi = "10.1088/2053-1591/ac648c",
language = "English",
volume = "9.2022",
journal = "Materials Research Express",
issn = "2053-1591",
publisher = "IOP Publishing Ltd.",
number = "4",

}

RIS (suitable for import to EndNote) - Download

TY - JOUR

T1 - Thermal stress analysis and structural optimization of ladle nozzle based on finite element simulation

AU - Rong, Zichao

AU - Yi, Jianhong

AU - Li, Fengxian

AU - Liu, Yichun

AU - Eckert, Jürgen

N1 - Publisher Copyright: © 2022 The Author(s). Published by IOP Publishing Ltd.

PY - 2022/4/14

Y1 - 2022/4/14

N2 - The ladle nozzle is one of the most important components in metal smelting. The cracking phenomenon occurs due to excessive thermal stress, which seriously affects the performance and life of the ladle nozzle. In this paper, a new composite structure of ladle nozzle is proposed, which consists of two materials with different properties and costs. The thermal physical parameters of the material are measured by high temperature dynamic Young's modulus test method, thermal expansion test and flashing method. Based on the new structural model of the composite ladle nozzle, finite element simulation is used to combine the material ontology model, contact mechanics model and heat transfer model to study the temperature and thermal stress distribution inside the composite structure of the ladle nozzle during the casting process by taking representative key points inside the ladle nozzle. There is a large temperature gradient in the area near the casting hole, and the farther away from the casting hole, the smaller the temperature change. The ladle nozzle structure was optimized and compared with the existing ladle nozzle structure. The results show that the optimized composite structure of the ladle nozzle has significantly lowered thermal stress extremes under thermal shock, while the thermal stress distribution tends to be more uniform, which can largely reduce the chance of crack generation. This study is of great significance for improving the reliability and service life of the ladle nozzle and reducing its production cost.

AB - The ladle nozzle is one of the most important components in metal smelting. The cracking phenomenon occurs due to excessive thermal stress, which seriously affects the performance and life of the ladle nozzle. In this paper, a new composite structure of ladle nozzle is proposed, which consists of two materials with different properties and costs. The thermal physical parameters of the material are measured by high temperature dynamic Young's modulus test method, thermal expansion test and flashing method. Based on the new structural model of the composite ladle nozzle, finite element simulation is used to combine the material ontology model, contact mechanics model and heat transfer model to study the temperature and thermal stress distribution inside the composite structure of the ladle nozzle during the casting process by taking representative key points inside the ladle nozzle. There is a large temperature gradient in the area near the casting hole, and the farther away from the casting hole, the smaller the temperature change. The ladle nozzle structure was optimized and compared with the existing ladle nozzle structure. The results show that the optimized composite structure of the ladle nozzle has significantly lowered thermal stress extremes under thermal shock, while the thermal stress distribution tends to be more uniform, which can largely reduce the chance of crack generation. This study is of great significance for improving the reliability and service life of the ladle nozzle and reducing its production cost.

KW - finite elements

KW - refractory

KW - simulation

KW - structural optimization

UR - http://www.scopus.com/inward/record.url?scp=85128946839&partnerID=8YFLogxK

U2 - 10.1088/2053-1591/ac648c

DO - 10.1088/2053-1591/ac648c

M3 - Article

AN - SCOPUS:85128946839

VL - 9.2022

JO - Materials Research Express

JF - Materials Research Express

SN - 2053-1591

IS - 4

M1 - 045601

ER -