The influence of intergranular oxidation on surface crack formation in continuous casting of steel

Publikationen: Beitrag in FachzeitschriftArtikelForschung(peer-reviewed)

Standard

The influence of intergranular oxidation on surface crack formation in continuous casting of steel. / Gaiser, Georg; Krobath, Roman; Presoly, Peter et al.
in: Journal of Materials Research and Technology, Jahrgang 26.2023, Nr. September-October, 23.09.2023, S. 9276-9288.

Publikationen: Beitrag in FachzeitschriftArtikelForschung(peer-reviewed)

Vancouver

Gaiser G, Krobath R, Presoly P, Bernhard C. The influence of intergranular oxidation on surface crack formation in continuous casting of steel. Journal of Materials Research and Technology. 2023 Sep 23;26.2023(September-October):9276-9288. Epub 2023 Sep 23. doi: 10.1016/j.jmrt.2023.09.214

Bibtex - Download

@article{51bcd7fb2102492c91d83c66b5b3b5aa,
title = "The influence of intergranular oxidation on surface crack formation in continuous casting of steel",
abstract = "High-temperature oxidation phenomena play an important role in steel processing. What is mostly underrated is the importance of internal oxidation in casting processes, namely the continuous casting process. To investigate the impact of intergranular oxidation on surface defect formation, experiments for two cooling strategies and time sequences for a conventional slab caster were conducted. As the influence of silicon on high-temperature oxidation is well known and its effect on surface ductility is marginal silicon was chosen as an alloying element to provoke intergranular oxidation. The methods used were the In-Situ Material Characterization by Bending test (IMC-B), which provides the investigation of the susceptibility to surface crack formation by 3-point bending under oxidizing testing conditions and simultaneous thermal analysis for the well-controlled study of high-temperature oxidation phenomena. The results show that during a cooling cycle supporting highly oxidizing conditions, silicon favors the formation of a low-melting eutectic (FeO–Fe2SiO4) at the interface, infiltrating the steel along the austenite grain boundaries. The intergranular oxidation formed has a depth of less than 50 μm but leads to a stress concentration during a subsequent tensile deformation. In consequence, cracks may easily nucleate and propagate along austenite grain boundaries. A change in the steel composition by reducing the silicon content to almost zero or a less harmful temperature sequence reduces intergranular oxidation and subsequently the susceptibility to crack formation.",
keywords = "Continuous casting, IMC-B test, Intergranular oxidation, Silicon, Surface crack formation",
author = "Georg Gaiser and Roman Krobath and Peter Presoly and Christian Bernhard",
note = "Publisher Copyright: {\textcopyright} 2023 The Author(s)",
year = "2023",
month = sep,
day = "23",
doi = "10.1016/j.jmrt.2023.09.214",
language = "English",
volume = "26.2023",
pages = "9276--9288",
journal = "Journal of Materials Research and Technology",
issn = "2238-7854",
publisher = "Elsevier",
number = "September-October",

}

RIS (suitable for import to EndNote) - Download

TY - JOUR

T1 - The influence of intergranular oxidation on surface crack formation in continuous casting of steel

AU - Gaiser, Georg

AU - Krobath, Roman

AU - Presoly, Peter

AU - Bernhard, Christian

N1 - Publisher Copyright: © 2023 The Author(s)

PY - 2023/9/23

Y1 - 2023/9/23

N2 - High-temperature oxidation phenomena play an important role in steel processing. What is mostly underrated is the importance of internal oxidation in casting processes, namely the continuous casting process. To investigate the impact of intergranular oxidation on surface defect formation, experiments for two cooling strategies and time sequences for a conventional slab caster were conducted. As the influence of silicon on high-temperature oxidation is well known and its effect on surface ductility is marginal silicon was chosen as an alloying element to provoke intergranular oxidation. The methods used were the In-Situ Material Characterization by Bending test (IMC-B), which provides the investigation of the susceptibility to surface crack formation by 3-point bending under oxidizing testing conditions and simultaneous thermal analysis for the well-controlled study of high-temperature oxidation phenomena. The results show that during a cooling cycle supporting highly oxidizing conditions, silicon favors the formation of a low-melting eutectic (FeO–Fe2SiO4) at the interface, infiltrating the steel along the austenite grain boundaries. The intergranular oxidation formed has a depth of less than 50 μm but leads to a stress concentration during a subsequent tensile deformation. In consequence, cracks may easily nucleate and propagate along austenite grain boundaries. A change in the steel composition by reducing the silicon content to almost zero or a less harmful temperature sequence reduces intergranular oxidation and subsequently the susceptibility to crack formation.

AB - High-temperature oxidation phenomena play an important role in steel processing. What is mostly underrated is the importance of internal oxidation in casting processes, namely the continuous casting process. To investigate the impact of intergranular oxidation on surface defect formation, experiments for two cooling strategies and time sequences for a conventional slab caster were conducted. As the influence of silicon on high-temperature oxidation is well known and its effect on surface ductility is marginal silicon was chosen as an alloying element to provoke intergranular oxidation. The methods used were the In-Situ Material Characterization by Bending test (IMC-B), which provides the investigation of the susceptibility to surface crack formation by 3-point bending under oxidizing testing conditions and simultaneous thermal analysis for the well-controlled study of high-temperature oxidation phenomena. The results show that during a cooling cycle supporting highly oxidizing conditions, silicon favors the formation of a low-melting eutectic (FeO–Fe2SiO4) at the interface, infiltrating the steel along the austenite grain boundaries. The intergranular oxidation formed has a depth of less than 50 μm but leads to a stress concentration during a subsequent tensile deformation. In consequence, cracks may easily nucleate and propagate along austenite grain boundaries. A change in the steel composition by reducing the silicon content to almost zero or a less harmful temperature sequence reduces intergranular oxidation and subsequently the susceptibility to crack formation.

KW - Continuous casting

KW - IMC-B test

KW - Intergranular oxidation

KW - Silicon

KW - Surface crack formation

UR - http://www.scopus.com/inward/record.url?scp=85173164463&partnerID=8YFLogxK

U2 - 10.1016/j.jmrt.2023.09.214

DO - 10.1016/j.jmrt.2023.09.214

M3 - Article

AN - SCOPUS:85173164463

VL - 26.2023

SP - 9276

EP - 9288

JO - Journal of Materials Research and Technology

JF - Journal of Materials Research and Technology

SN - 2238-7854

IS - September-October

ER -