TY - JOUR

T1 - Synthesis and Mechanical Characterisation of an Ultra-Fine Grained Ti-Mg Composite

AU - Alfreider, Markus

AU - Jeong, Jiwon

AU - Esterl, Raphael

AU - Oh, Sang Ho

AU - Kiener, Daniel

PY - 2016/8/11

Y1 - 2016/8/11

N2 - The importance of lightweight materials such as titanium and magnesium in various technical applications, for example aerospace, medical implants and lightweight construction is well appreciated. The present study is an attempt to combine and improve the mechanical properties of these two materials by forming an ultra-fine grained composite. The material, with a composition of 75 vol% (88.4 wt%) Ti and 25 vol% (11.4 wt%) Mg , was synthesized by powder compression and subsequently deformed by high-pressure torsion. Using focused ion beam machining, miniaturised compression samples were prepared and tested in-situ in a scanning electron microscope to gain insights into local deformation behaviour and mechanical properties of the nanocomposite. Results show outstanding yield strength of around 1250 MPa, which is roughly 200 to 500 MPa higher than literature reports of similar materials. The failure mode of the samples is accounted for by cracking along the phase boundaries.

AB - The importance of lightweight materials such as titanium and magnesium in various technical applications, for example aerospace, medical implants and lightweight construction is well appreciated. The present study is an attempt to combine and improve the mechanical properties of these two materials by forming an ultra-fine grained composite. The material, with a composition of 75 vol% (88.4 wt%) Ti and 25 vol% (11.4 wt%) Mg , was synthesized by powder compression and subsequently deformed by high-pressure torsion. Using focused ion beam machining, miniaturised compression samples were prepared and tested in-situ in a scanning electron microscope to gain insights into local deformation behaviour and mechanical properties of the nanocomposite. Results show outstanding yield strength of around 1250 MPa, which is roughly 200 to 500 MPa higher than literature reports of similar materials. The failure mode of the samples is accounted for by cracking along the phase boundaries.

KW - Composite materials

KW - High-pressure torsion (HPT)

KW - In-situ

KW - Magnesium

KW - Microcompression

KW - Scanning electron microscopy (SEM)

KW - Titanium

UR - http://www.scopus.com/inward/record.url?scp=84984629309&partnerID=8YFLogxK

U2 - 10.3390/ma9080688

DO - 10.3390/ma9080688

M3 - Article

AN - SCOPUS:84984629309

VL - 9.2016

JO - Materials

JF - Materials

SN - 1996-1944

IS - 8

M1 - 688

ER -