Research on cold forming of tubular electrode plates for lead-acid batteries
Publikationen: Thesis / Studienabschlussarbeiten und Habilitationsschriften › Diplomarbeit › (peer-reviewed)
Standard
2011. 101 S.
Publikationen: Thesis / Studienabschlussarbeiten und Habilitationsschriften › Diplomarbeit › (peer-reviewed)
Harvard
APA
Vancouver
Author
Bibtex - Download
}
RIS (suitable for import to EndNote) - Download
TY - THES
T1 - Research on cold forming of tubular electrode plates for lead-acid batteries
AU - Zhai, Hui
N1 - embargoed until null
PY - 2011
Y1 - 2011
N2 - The traditional manufacturing method of a lead batteries tubular plate is casting. To improve the tubular plate quality, to reduce production cost, to protect environment and human health in production a new manufacturing method is needed. The task of this thesis is to analyse the feasibility of using cold extrusion by laboratory tests and application trials. A series of compression tests were performed to measure flow stress of lead and lead-antimony alloy (Sb 3.5%) at different temperatures. According to the test results, cold extrusion dies were designed. On the basis of products quality analysis and laboratory tests using cold extrusion, the manufacturing processes die-casting and cold extrusion were compared and evaluated. Based on our study, cold extrusion is proved to be suitable for production of battery tubular plate. Further suggestions of modification of production process using cold extrusion are presented.
AB - The traditional manufacturing method of a lead batteries tubular plate is casting. To improve the tubular plate quality, to reduce production cost, to protect environment and human health in production a new manufacturing method is needed. The task of this thesis is to analyse the feasibility of using cold extrusion by laboratory tests and application trials. A series of compression tests were performed to measure flow stress of lead and lead-antimony alloy (Sb 3.5%) at different temperatures. According to the test results, cold extrusion dies were designed. On the basis of products quality analysis and laboratory tests using cold extrusion, the manufacturing processes die-casting and cold extrusion were compared and evaluated. Based on our study, cold extrusion is proved to be suitable for production of battery tubular plate. Further suggestions of modification of production process using cold extrusion are presented.
KW - Batterie Polplatte
KW - Blei und Bleilegierungen
KW - Kaltumformung
KW - Fließpressen
KW - Tubular plates of batteries
KW - lead and lead alloys
KW - cold forming
KW - cold extrusion
M3 - Diploma Thesis
ER -
