TY - JOUR

T1 - On the Change in Hydrogen Diffusion and Trapping Behaviour of Pearlitic Rail Steel at Different Stages of Production

AU - Eichinger, Matthias

AU - Loder, Bernd

AU - Tkadletz, Michael

AU - Schnideritsch, Holger

AU - Klösch, Gerald

AU - Mori, Gregor Karl

PY - 2023/8/23

Y1 - 2023/8/23

N2 - To avoid hydrogen flaking in rail production, it is of crucial importance to understand the differences in hydrogen diffusion and trapping between different production steps. Therefore, as-cast unfinished material was compared with two finished rails, hot-rolled and head-hardened, using electron backscattered diffraction (EBSD), electrochemical permeation, and thermal desorption spectroscopy (TDS). A significant increase in dislocation density was in the head-hardened rail compared with the other material states. This leads to an effective hydrogen diffusion coefficient of 5.8 × 10−7 cm2/s which is lower by a factor of four than the diffusion coefficients examined in the other states. Thermal desorption spectroscopy analyses show a clear difference between unfinished and finished rail materials. While a peak in activation energy between 32 and 38 kJ/mol is present at all states, only as-cast unfinished material shows a second peak with an activation energy of 47 kJ/mol, which is related to microvoids. The results show that in the investigated material, the effect of increasing dislocation density has a stronger influence on the effective diffusion coefficient than the presence of a second active trapping site.

AB - To avoid hydrogen flaking in rail production, it is of crucial importance to understand the differences in hydrogen diffusion and trapping between different production steps. Therefore, as-cast unfinished material was compared with two finished rails, hot-rolled and head-hardened, using electron backscattered diffraction (EBSD), electrochemical permeation, and thermal desorption spectroscopy (TDS). A significant increase in dislocation density was in the head-hardened rail compared with the other material states. This leads to an effective hydrogen diffusion coefficient of 5.8 × 10−7 cm2/s which is lower by a factor of four than the diffusion coefficients examined in the other states. Thermal desorption spectroscopy analyses show a clear difference between unfinished and finished rail materials. While a peak in activation energy between 32 and 38 kJ/mol is present at all states, only as-cast unfinished material shows a second peak with an activation energy of 47 kJ/mol, which is related to microvoids. The results show that in the investigated material, the effect of increasing dislocation density has a stronger influence on the effective diffusion coefficient than the presence of a second active trapping site.

U2 - 10.3390/ma16175780

DO - 10.3390/ma16175780

M3 - Article

VL - 16.2023

JO - Materials

JF - Materials

SN - 1996-1944

IS - 17

M1 - 5780

ER -