Modifying the Surface Structure of Perovskite-Based Catalysts by Nanoparticle Exsolution

Publikationen: Beitrag in FachzeitschriftArtikelForschung(peer-reviewed)

Standard

Modifying the Surface Structure of Perovskite-Based Catalysts by Nanoparticle Exsolution. / Lindenthal, Lorenz; Rameshan, Raffael; Summerer, Harald et al.
in: Catalysts, Jahrgang 10.2020, Nr. 3, 268, 01.03.2020.

Publikationen: Beitrag in FachzeitschriftArtikelForschung(peer-reviewed)

Vancouver

Lindenthal L, Rameshan R, Summerer H, Ruh T, Popovic J, Nenning A et al. Modifying the Surface Structure of Perovskite-Based Catalysts by Nanoparticle Exsolution. Catalysts. 2020 Mär 1;10.2020(3):268. doi: 10.3390/catal10030268

Bibtex - Download

@article{501297361c03443882298781a0c7fcf9,
title = "Modifying the Surface Structure of Perovskite-Based Catalysts by Nanoparticle Exsolution",
abstract = "In heterogeneous catalysis, surfaces decorated with uniformly dispersed, catalytically-active (nano)particles are a key requirement for excellent performance. Beside standard catalyst preparation routines—with limitations in controlling catalyst surface structure (i.e., particle size distribution or dispersion)—we present here a novel time efficient route to precisely tailor catalyst surface morphology and composition of perovskites. Perovskite-type oxides of nominal composition ABO3 with transition metal cations on the B-site can exsolve the B-site transition metal upon controlled reduction. In this exsolution process, the transition metal emerges from the oxide lattice and migrates to the surface where it forms catalytically active nanoparticles. Doping the B-site with reducible and catalytically highly active elements, offers the opportunity of tailoring properties of exsolution catalysts. Here, we present the synthesis of two novel perovskite catalysts Nd0.6Ca0.4FeO3-δ and Nd0.6Ca0.4Fe0.9Co0.1O3-δ with characterisation by (in situ) XRD, SEM/TEM and XPS, supported by theory (DFT+U). Fe nanoparticle formation was observed for Nd0.6Ca0.4FeO3-δ. In comparison, B site cobalt doping leads, already at lower reduction temperatures, to formation of finely dispersed Co nanoparticles on the surface. These novel perovskite-type catalysts are highly promising for applications in chemical energy conversion. First measurements revealed that exsolved Co nanoparticles significantly improve the catalytic activity for CO2 activation via reverse water gas shift reaction.",
keywords = "Exsolution, Nanoparticles, Perovskites, Reverse water-gas shift reaction, Tailored surfaces",
author = "Lorenz Lindenthal and Raffael Rameshan and Harald Summerer and Thomas Ruh and Janko Popovic and Andreas Nenning and Stefan L{\"o}ffler and Opitz, {Alexander Karl} and Peter Blaha and Christoph Rameshan",
note = "Publisher Copyright: {\textcopyright} 2020 by the authors. Licensee MDPI, Basel, Switzerland.",
year = "2020",
month = mar,
day = "1",
doi = "10.3390/catal10030268",
language = "English",
volume = "10.2020",
journal = "Catalysts",
issn = "2073-4344",
publisher = "Multidisciplinary Digital Publishing Institute (MDPI)",
number = "3",

}

RIS (suitable for import to EndNote) - Download

TY - JOUR

T1 - Modifying the Surface Structure of Perovskite-Based Catalysts by Nanoparticle Exsolution

AU - Lindenthal, Lorenz

AU - Rameshan, Raffael

AU - Summerer, Harald

AU - Ruh, Thomas

AU - Popovic, Janko

AU - Nenning, Andreas

AU - Löffler, Stefan

AU - Opitz, Alexander Karl

AU - Blaha, Peter

AU - Rameshan, Christoph

N1 - Publisher Copyright: © 2020 by the authors. Licensee MDPI, Basel, Switzerland.

PY - 2020/3/1

Y1 - 2020/3/1

N2 - In heterogeneous catalysis, surfaces decorated with uniformly dispersed, catalytically-active (nano)particles are a key requirement for excellent performance. Beside standard catalyst preparation routines—with limitations in controlling catalyst surface structure (i.e., particle size distribution or dispersion)—we present here a novel time efficient route to precisely tailor catalyst surface morphology and composition of perovskites. Perovskite-type oxides of nominal composition ABO3 with transition metal cations on the B-site can exsolve the B-site transition metal upon controlled reduction. In this exsolution process, the transition metal emerges from the oxide lattice and migrates to the surface where it forms catalytically active nanoparticles. Doping the B-site with reducible and catalytically highly active elements, offers the opportunity of tailoring properties of exsolution catalysts. Here, we present the synthesis of two novel perovskite catalysts Nd0.6Ca0.4FeO3-δ and Nd0.6Ca0.4Fe0.9Co0.1O3-δ with characterisation by (in situ) XRD, SEM/TEM and XPS, supported by theory (DFT+U). Fe nanoparticle formation was observed for Nd0.6Ca0.4FeO3-δ. In comparison, B site cobalt doping leads, already at lower reduction temperatures, to formation of finely dispersed Co nanoparticles on the surface. These novel perovskite-type catalysts are highly promising for applications in chemical energy conversion. First measurements revealed that exsolved Co nanoparticles significantly improve the catalytic activity for CO2 activation via reverse water gas shift reaction.

AB - In heterogeneous catalysis, surfaces decorated with uniformly dispersed, catalytically-active (nano)particles are a key requirement for excellent performance. Beside standard catalyst preparation routines—with limitations in controlling catalyst surface structure (i.e., particle size distribution or dispersion)—we present here a novel time efficient route to precisely tailor catalyst surface morphology and composition of perovskites. Perovskite-type oxides of nominal composition ABO3 with transition metal cations on the B-site can exsolve the B-site transition metal upon controlled reduction. In this exsolution process, the transition metal emerges from the oxide lattice and migrates to the surface where it forms catalytically active nanoparticles. Doping the B-site with reducible and catalytically highly active elements, offers the opportunity of tailoring properties of exsolution catalysts. Here, we present the synthesis of two novel perovskite catalysts Nd0.6Ca0.4FeO3-δ and Nd0.6Ca0.4Fe0.9Co0.1O3-δ with characterisation by (in situ) XRD, SEM/TEM and XPS, supported by theory (DFT+U). Fe nanoparticle formation was observed for Nd0.6Ca0.4FeO3-δ. In comparison, B site cobalt doping leads, already at lower reduction temperatures, to formation of finely dispersed Co nanoparticles on the surface. These novel perovskite-type catalysts are highly promising for applications in chemical energy conversion. First measurements revealed that exsolved Co nanoparticles significantly improve the catalytic activity for CO2 activation via reverse water gas shift reaction.

KW - Exsolution

KW - Nanoparticles

KW - Perovskites

KW - Reverse water-gas shift reaction

KW - Tailored surfaces

UR - http://www.scopus.com/inward/record.url?scp=85081221745&partnerID=8YFLogxK

U2 - 10.3390/catal10030268

DO - 10.3390/catal10030268

M3 - Article

AN - SCOPUS:85081221745

VL - 10.2020

JO - Catalysts

JF - Catalysts

SN - 2073-4344

IS - 3

M1 - 268

ER -