TY - JOUR

T1 - Inhibition of grain growth by pearlite improves hydrogen embrittlement susceptibility of the ultra-low carbon ferritic steel

T2 - the influence of H-assisted crack initiation and propagation mechanisms

AU - Pichler, Stefanie

AU - Bendo, Artenis

AU - Mori, Gregor Karl

AU - Safyari, Mahdieh

AU - Moshtaghi, Masoud

PY - 2023/8/29

Y1 - 2023/8/29

N2 - The influence of grain growth inhibition by pearlite on hydrogen embrittlement (HE) behavior of ultra-low carbon ferritic steels was studied. The Fe-0.02C alloy has a considerable sensitivity to HE, while the Fe and Fe-0.1C materials have lower HE sensitivity. The high fraction of high-angle grain boundaries (HAGB) is responsible for the shift of the peak to a higher temperature in the Fe-0.1C alloy. The trapping of hydrogen by HAGBs was observed by hydrogen mapping. Higher density of HAGBs contributes to higher trap density in Fe-0.1C alloy and lower H diffusion coefficient. The coexistence of hydrogen enhanced decohesion (HEDE) and hydrogen-enhanced localized plasticity (HELP) mechanisms was identified and discussed. The results indicate that HEDE is active in the initial stage of the tensile loading during crack initiation and HELP in the rest of tensile testing duration that controls the crack propagation. Due to the reduction in grain size caused by the addition of pearlite, the normalized hydrogen content per HAGB length is significantly lower than Fe-0.1C, which means that the critical amount of local hydrogen required for crack initiation is less likely to accumulate due to the weakening of cohesive interatomic strength. In Fe-0.02C alloy, the ciritcal local content was built up at HAGBs, and resulting in activation of HEDE mechanism for crack initiation. In Fe-0.1C, a lower possibility of accumulating the critical H concentration at HAGBs, resulting in limited activation of HEDE-based crack initiation at HAGB and less crack propagation events based on the HELP mechanism.

AB - The influence of grain growth inhibition by pearlite on hydrogen embrittlement (HE) behavior of ultra-low carbon ferritic steels was studied. The Fe-0.02C alloy has a considerable sensitivity to HE, while the Fe and Fe-0.1C materials have lower HE sensitivity. The high fraction of high-angle grain boundaries (HAGB) is responsible for the shift of the peak to a higher temperature in the Fe-0.1C alloy. The trapping of hydrogen by HAGBs was observed by hydrogen mapping. Higher density of HAGBs contributes to higher trap density in Fe-0.1C alloy and lower H diffusion coefficient. The coexistence of hydrogen enhanced decohesion (HEDE) and hydrogen-enhanced localized plasticity (HELP) mechanisms was identified and discussed. The results indicate that HEDE is active in the initial stage of the tensile loading during crack initiation and HELP in the rest of tensile testing duration that controls the crack propagation. Due to the reduction in grain size caused by the addition of pearlite, the normalized hydrogen content per HAGB length is significantly lower than Fe-0.1C, which means that the critical amount of local hydrogen required for crack initiation is less likely to accumulate due to the weakening of cohesive interatomic strength. In Fe-0.02C alloy, the ciritcal local content was built up at HAGBs, and resulting in activation of HEDE mechanism for crack initiation. In Fe-0.1C, a lower possibility of accumulating the critical H concentration at HAGBs, resulting in limited activation of HEDE-based crack initiation at HAGB and less crack propagation events based on the HELP mechanism.

U2 - 10.1007/s10853-023-08856-y

DO - 10.1007/s10853-023-08856-y

M3 - Article

VL - 58.2023

SP - 13460

JO - Journal of materials science

JF - Journal of materials science

SN - 0022-2461

IS - September

ER -