Influence of Y-substitution on phase composition and proton uptake of self-generated Ba(Ce,Fe)O3-δ-Ba(Fe,Ce)O3-δ composites

Publikationen: Beitrag in FachzeitschriftArtikelForschung(peer-reviewed)

Standard

Influence of Y-substitution on phase composition and proton uptake of self-generated Ba(Ce,Fe)O3-δ-Ba(Fe,Ce)O3-δ composites. / Berger, Christian; Bucher, Edith; Merkle, Rotraut et al.
in: Journal of Materials Chemistry A, Jahrgang 10.2022, Nr. 5, 15.11.2021, S. 2474-2482.

Publikationen: Beitrag in FachzeitschriftArtikelForschung(peer-reviewed)

Vancouver

Bibtex - Download

@article{469dea16971f41f0b91d7a4abe13a32b,
title = "Influence of Y-substitution on phase composition and proton uptake of self-generated Ba(Ce,Fe)O3-δ-Ba(Fe,Ce)O3-δ composites",
abstract = "Self-generated composites from the series BaCe1−(x+z)FexYzO3−δ with z = 0.2 for 0.1 ≤ x ≤ 0.6 and z = 0 for Ce : Fe = 1 were obtained by one-pot synthesis. The composites consist of proton and electron conducting phases and are interesting as electrode materials for protonic ceramic fuel and electrolyser cells. X-ray diffraction with quantitative phase analysis and scanning electron microscopy with energy-dispersive X-ray spectroscopy showed that the materials consist of Fe-rich phases and a Ce-rich perovskite phase, which are present in the corresponding proportion depending on the precursor composition (Ce–Fe ratio). Substitution with Y leads to a narrowing of the miscibility gap compared to BaCe1−xFexO3−δ composites, thus favouring transformation of the composites into single cubic phases at temperatures above 1000 °C. Further, Y influences the mutual solubility of Fe3+/4+ and Ce4+ in the Ce-rich and Fe-rich phase, respectively, as shown elemental mapping via scanning transmission electron microscopy. As only a small proportion of the Y dissolves in the electrolyte-type phase, the increased proton uptake resulting from the incorporation of Y in the Ce-rich phase is limited. Strategies to overcome this limitation by substitution with ions with similar ionic radii, but different basicity, are discussed.",
author = "Christian Berger and Edith Bucher and Rotraut Merkle and Christina Nader and Judith Lammer and Werner Grogger and Joachim Maier and Werner Sitte",
year = "2021",
month = nov,
day = "15",
doi = "10.1039/D1TA07208K",
language = "English",
volume = "10.2022",
pages = "2474--2482",
journal = "Journal of Materials Chemistry A",
issn = "2050-7488",
publisher = "Royal Society of Chemistry",
number = "5",

}

RIS (suitable for import to EndNote) - Download

TY - JOUR

T1 - Influence of Y-substitution on phase composition and proton uptake of self-generated Ba(Ce,Fe)O3-δ-Ba(Fe,Ce)O3-δ composites

AU - Berger, Christian

AU - Bucher, Edith

AU - Merkle, Rotraut

AU - Nader, Christina

AU - Lammer, Judith

AU - Grogger, Werner

AU - Maier, Joachim

AU - Sitte, Werner

PY - 2021/11/15

Y1 - 2021/11/15

N2 - Self-generated composites from the series BaCe1−(x+z)FexYzO3−δ with z = 0.2 for 0.1 ≤ x ≤ 0.6 and z = 0 for Ce : Fe = 1 were obtained by one-pot synthesis. The composites consist of proton and electron conducting phases and are interesting as electrode materials for protonic ceramic fuel and electrolyser cells. X-ray diffraction with quantitative phase analysis and scanning electron microscopy with energy-dispersive X-ray spectroscopy showed that the materials consist of Fe-rich phases and a Ce-rich perovskite phase, which are present in the corresponding proportion depending on the precursor composition (Ce–Fe ratio). Substitution with Y leads to a narrowing of the miscibility gap compared to BaCe1−xFexO3−δ composites, thus favouring transformation of the composites into single cubic phases at temperatures above 1000 °C. Further, Y influences the mutual solubility of Fe3+/4+ and Ce4+ in the Ce-rich and Fe-rich phase, respectively, as shown elemental mapping via scanning transmission electron microscopy. As only a small proportion of the Y dissolves in the electrolyte-type phase, the increased proton uptake resulting from the incorporation of Y in the Ce-rich phase is limited. Strategies to overcome this limitation by substitution with ions with similar ionic radii, but different basicity, are discussed.

AB - Self-generated composites from the series BaCe1−(x+z)FexYzO3−δ with z = 0.2 for 0.1 ≤ x ≤ 0.6 and z = 0 for Ce : Fe = 1 were obtained by one-pot synthesis. The composites consist of proton and electron conducting phases and are interesting as electrode materials for protonic ceramic fuel and electrolyser cells. X-ray diffraction with quantitative phase analysis and scanning electron microscopy with energy-dispersive X-ray spectroscopy showed that the materials consist of Fe-rich phases and a Ce-rich perovskite phase, which are present in the corresponding proportion depending on the precursor composition (Ce–Fe ratio). Substitution with Y leads to a narrowing of the miscibility gap compared to BaCe1−xFexO3−δ composites, thus favouring transformation of the composites into single cubic phases at temperatures above 1000 °C. Further, Y influences the mutual solubility of Fe3+/4+ and Ce4+ in the Ce-rich and Fe-rich phase, respectively, as shown elemental mapping via scanning transmission electron microscopy. As only a small proportion of the Y dissolves in the electrolyte-type phase, the increased proton uptake resulting from the incorporation of Y in the Ce-rich phase is limited. Strategies to overcome this limitation by substitution with ions with similar ionic radii, but different basicity, are discussed.

U2 - 10.1039/D1TA07208K

DO - 10.1039/D1TA07208K

M3 - Article

VL - 10.2022

SP - 2474

EP - 2482

JO - Journal of Materials Chemistry A

JF - Journal of Materials Chemistry A

SN - 2050-7488

IS - 5

ER -