In situ micromechanical analysis of a nano-crystalline W-Cu composite

Publikationen: Beitrag in FachzeitschriftArtikelForschung(peer-reviewed)

Standard

In situ micromechanical analysis of a nano-crystalline W-Cu composite. / Burtscher, Michael; Alfreider, Markus; Kainz, Christina et al.
in: Materials and Design, Jahrgang 220.2022, Nr. August, 110848, 08.2022.

Publikationen: Beitrag in FachzeitschriftArtikelForschung(peer-reviewed)

Bibtex - Download

@article{f674627f9d5a453f8757481869f27546,
title = "In situ micromechanical analysis of a nano-crystalline W-Cu composite",
abstract = "W-Cu composites are commonly used as heat-sinks or high-performance switches in power electronics. To enhance their mechanical properties and mutually their usability, grain refinement of the initially coarse-grained microstructure was realized using high–pressure torsion. This leads to different microstructural conditions, exhibiting fine-, ultrafine-grained or nanocrystalline microstructures. Scanning as well as transmission electron microscopy was performed to analyze the respective grain size and microstructures. The hardness and Young{\textquoteright}s modulus of the deformed specimens were quantified by nanoindentation testing. Furthermore, X–ray diffraction indicated a decreased grain size and changed lattice spacings upon increasing the deformation ratio. The deformed specimens were tested for their fracture behaviour by continuous stiffness measurements during in-situ microcantilever bending experiments. Here, mean J–integral values of 288 ± 38 J/m2 and 402 ± 89 J/m2 were determined for the 5 and 50 times turned specimens, respectively. The combination of different characterization methods applied on a W–Cu composite allows to identify both, beneficial and unfavourable microstructural components regarding the fracture properties.",
author = "Michael Burtscher and Markus Alfreider and Christina Kainz and Schmuck, {Klemens Silvester} and Daniel Kiener",
note = "Publisher Copyright: {\textcopyright} 2022 The Authors",
year = "2022",
month = aug,
doi = "10.1016/j.matdes.2022.110848",
language = "English",
volume = "220.2022",
journal = "Materials and Design",
issn = "0264-1275",
publisher = "Elsevier",
number = "August",

}

RIS (suitable for import to EndNote) - Download

TY - JOUR

T1 - In situ micromechanical analysis of a nano-crystalline W-Cu composite

AU - Burtscher, Michael

AU - Alfreider, Markus

AU - Kainz, Christina

AU - Schmuck, Klemens Silvester

AU - Kiener, Daniel

N1 - Publisher Copyright: © 2022 The Authors

PY - 2022/8

Y1 - 2022/8

N2 - W-Cu composites are commonly used as heat-sinks or high-performance switches in power electronics. To enhance their mechanical properties and mutually their usability, grain refinement of the initially coarse-grained microstructure was realized using high–pressure torsion. This leads to different microstructural conditions, exhibiting fine-, ultrafine-grained or nanocrystalline microstructures. Scanning as well as transmission electron microscopy was performed to analyze the respective grain size and microstructures. The hardness and Young’s modulus of the deformed specimens were quantified by nanoindentation testing. Furthermore, X–ray diffraction indicated a decreased grain size and changed lattice spacings upon increasing the deformation ratio. The deformed specimens were tested for their fracture behaviour by continuous stiffness measurements during in-situ microcantilever bending experiments. Here, mean J–integral values of 288 ± 38 J/m2 and 402 ± 89 J/m2 were determined for the 5 and 50 times turned specimens, respectively. The combination of different characterization methods applied on a W–Cu composite allows to identify both, beneficial and unfavourable microstructural components regarding the fracture properties.

AB - W-Cu composites are commonly used as heat-sinks or high-performance switches in power electronics. To enhance their mechanical properties and mutually their usability, grain refinement of the initially coarse-grained microstructure was realized using high–pressure torsion. This leads to different microstructural conditions, exhibiting fine-, ultrafine-grained or nanocrystalline microstructures. Scanning as well as transmission electron microscopy was performed to analyze the respective grain size and microstructures. The hardness and Young’s modulus of the deformed specimens were quantified by nanoindentation testing. Furthermore, X–ray diffraction indicated a decreased grain size and changed lattice spacings upon increasing the deformation ratio. The deformed specimens were tested for their fracture behaviour by continuous stiffness measurements during in-situ microcantilever bending experiments. Here, mean J–integral values of 288 ± 38 J/m2 and 402 ± 89 J/m2 were determined for the 5 and 50 times turned specimens, respectively. The combination of different characterization methods applied on a W–Cu composite allows to identify both, beneficial and unfavourable microstructural components regarding the fracture properties.

UR - http://www.scopus.com/inward/record.url?scp=85132329809&partnerID=8YFLogxK

U2 - 10.1016/j.matdes.2022.110848

DO - 10.1016/j.matdes.2022.110848

M3 - Article

VL - 220.2022

JO - Materials and Design

JF - Materials and Design

SN - 0264-1275

IS - August

M1 - 110848

ER -