TY - JOUR

T1 - Hydrogen embrittlement of high strength steel under in situ corrosive charging conditions and tensile load

AU - Scharf, Roland

AU - Muhr, A.

AU - Stellnberger, Karl-Heinz

AU - Faderl, Josef

AU - Holzer, Christoph

AU - Mori, Gregor Karl

PY - 2016/6/21

Y1 - 2016/6/21

N2 - It is known that advanced and ultra-high strength steel grades (AHSS and UHSS) are susceptible to hydrogen embrittlement under certain test conditions [1, 2]. In this study, punched hole specimens for constant load testing with in situ hydrogen charging were used to quantify the effect of different corrosive conditions. Flowing or stagnant electrolyte (5% NaCl) conditions were established and time to failure was recorded as a function of applied tensile stress. The pH of the solution was set at 2, 7, and 12. Bare and zinc-galvanized (EG) specimens were used. Hydrogen uptake as a function of immersion time was characterized.

AB - It is known that advanced and ultra-high strength steel grades (AHSS and UHSS) are susceptible to hydrogen embrittlement under certain test conditions [1, 2]. In this study, punched hole specimens for constant load testing with in situ hydrogen charging were used to quantify the effect of different corrosive conditions. Flowing or stagnant electrolyte (5% NaCl) conditions were established and time to failure was recorded as a function of applied tensile stress. The pH of the solution was set at 2, 7, and 12. Bare and zinc-galvanized (EG) specimens were used. Hydrogen uptake as a function of immersion time was characterized.

U2 - 10.1002/maco.201508655

DO - 10.1002/maco.201508655

M3 - Article

VL - 68.2017

SP - 95

EP - 104

JO - Materials and Corrosion

JF - Materials and Corrosion

SN - 0947-5117

IS - 1

ER -