Fused filament fabrication, debinding and sintering as a low cost additive manufacturing method of 316L stainless steel

Publikationen: Beitrag in FachzeitschriftArtikelForschung(peer-reviewed)

Standard

Fused filament fabrication, debinding and sintering as a low cost additive manufacturing method of 316L stainless steel. / Thompson, Yvonne; Gonzalez-Gutierrez, Joamin; Kukla, Christian et al.
in: Additive Manufacturing, Jahrgang 30.2019, Nr. December, 100861, 09.09.2019.

Publikationen: Beitrag in FachzeitschriftArtikelForschung(peer-reviewed)

Bibtex - Download

@article{e3bd69d0af8c4273bcaa6a1e4e02a19e,
title = "Fused filament fabrication, debinding and sintering as a low cost additive manufacturing method of 316L stainless steel",
abstract = "By using filaments comprising metal or ceramic powders and polymer binders, solid metal and ceramic parts can be created by combining low-cost fused filament fabrication (FFF) with debinding and sintering. In this work, we explored a fabrication route using a FFF filament filled with 316 L steel powder at 55 vol.-%. We investigated the printing, debinding and sintering parameters and optimized them with respect to the mechanical properties of the final part. Special focus was placed on debinding and sintering in order to obtain components of low residual porosity. Solvent debinding of the printed green bodies created an internal network of interconnected pores and was followed by thermal debinding. Thermal debinding allowed for complete removal of the remaining binder and produced mechanically stable brown parts. Sintering at 1360 °C provided densification of the parts and generated nearly isotropic linear shrinkage of about 20%. Using optimized parameters, it was possible to fabricate 316 L steel components with a density greater than 95% via the material extrusion additive manufacturing, debinding and sintering route, with achievable deflections in a 3-point bending test similar to rolled sheet material, albeit at lower strength.",
keywords = "Fused Filament Fabrication, Steel, Sintering, debinding, Additive Manufacturing",
author = "Yvonne Thompson and Joamin Gonzalez-Gutierrez and Christian Kukla and Peter Felfer",
year = "2019",
month = sep,
day = "9",
doi = "10.1016/j.addma.2019.100861",
language = "English",
volume = "30.2019",
journal = "Additive Manufacturing",
issn = "2214-8604",
publisher = "Elsevier",
number = "December",

}

RIS (suitable for import to EndNote) - Download

TY - JOUR

T1 - Fused filament fabrication, debinding and sintering as a low cost additive manufacturing method of 316L stainless steel

AU - Thompson, Yvonne

AU - Gonzalez-Gutierrez, Joamin

AU - Kukla, Christian

AU - Felfer, Peter

PY - 2019/9/9

Y1 - 2019/9/9

N2 - By using filaments comprising metal or ceramic powders and polymer binders, solid metal and ceramic parts can be created by combining low-cost fused filament fabrication (FFF) with debinding and sintering. In this work, we explored a fabrication route using a FFF filament filled with 316 L steel powder at 55 vol.-%. We investigated the printing, debinding and sintering parameters and optimized them with respect to the mechanical properties of the final part. Special focus was placed on debinding and sintering in order to obtain components of low residual porosity. Solvent debinding of the printed green bodies created an internal network of interconnected pores and was followed by thermal debinding. Thermal debinding allowed for complete removal of the remaining binder and produced mechanically stable brown parts. Sintering at 1360 °C provided densification of the parts and generated nearly isotropic linear shrinkage of about 20%. Using optimized parameters, it was possible to fabricate 316 L steel components with a density greater than 95% via the material extrusion additive manufacturing, debinding and sintering route, with achievable deflections in a 3-point bending test similar to rolled sheet material, albeit at lower strength.

AB - By using filaments comprising metal or ceramic powders and polymer binders, solid metal and ceramic parts can be created by combining low-cost fused filament fabrication (FFF) with debinding and sintering. In this work, we explored a fabrication route using a FFF filament filled with 316 L steel powder at 55 vol.-%. We investigated the printing, debinding and sintering parameters and optimized them with respect to the mechanical properties of the final part. Special focus was placed on debinding and sintering in order to obtain components of low residual porosity. Solvent debinding of the printed green bodies created an internal network of interconnected pores and was followed by thermal debinding. Thermal debinding allowed for complete removal of the remaining binder and produced mechanically stable brown parts. Sintering at 1360 °C provided densification of the parts and generated nearly isotropic linear shrinkage of about 20%. Using optimized parameters, it was possible to fabricate 316 L steel components with a density greater than 95% via the material extrusion additive manufacturing, debinding and sintering route, with achievable deflections in a 3-point bending test similar to rolled sheet material, albeit at lower strength.

KW - Fused Filament Fabrication

KW - Steel

KW - Sintering

KW - debinding

KW - Additive Manufacturing

UR - http://www.scopus.com/inward/record.url?scp=85072574871&partnerID=8YFLogxK

U2 - 10.1016/j.addma.2019.100861

DO - 10.1016/j.addma.2019.100861

M3 - Article

VL - 30.2019

JO - Additive Manufacturing

JF - Additive Manufacturing

SN - 2214-8604

IS - December

M1 - 100861

ER -