Fabrication of stainless-steel microfibers with amorphous-nanosized microstructure with enhanced mechanical properties

Publikationen: Beitrag in FachzeitschriftArtikelForschung(peer-reviewed)

Standard

Fabrication of stainless-steel microfibers with amorphous-nanosized microstructure with enhanced mechanical properties. / Sharifikolouei, Elham; Sarac, Baran; Zheng, Yonghui et al.
in: Scientific reports (e-only), Jahrgang 12.2022, 10784, 24.06.2022.

Publikationen: Beitrag in FachzeitschriftArtikelForschung(peer-reviewed)

Vancouver

Sharifikolouei E, Sarac B, Zheng Y, Bala P, Eckert J. Fabrication of stainless-steel microfibers with amorphous-nanosized microstructure with enhanced mechanical properties. Scientific reports (e-only). 2022 Jun 24;12.2022:10784. doi: 10.1038/s41598-022-14475-5

Author

Bibtex - Download

@article{07466e15b3ee4c5db2b82c6898643706,
title = "Fabrication of stainless-steel microfibers with amorphous-nanosized microstructure with enhanced mechanical properties",
abstract = "Metallic glasses (MG) have attracted much attention due to their superior hardness and good corrosion resistance. However, designing new MG compositions is still a big challenge, and their integration into different systems is limited when they are in the shape of bulk materials. Here, we present a new method for the fabrication of MG in the form of microfibers which could greatly help them to be integrated within different systems. The newly proposed technique has the ability to form MG structure from commercially available alloy compositions thanks to its significantly improved quenching rate(~ 108 K.s−1). In this technique, individual melt droplets are ejected on a rotating wheel forming a thin film which are ruptured upon solidification leading to the formation of MG microfibers. In this regard, we have fabricated microfibers from a commercial DIN 1.4401 stainless-steel which could form a completely amorphous structure confirmed by DSC, XRD, and HRTEM. The fabricated MG microfibers show an increased hardness for more than two-fold from 3.5 ± 0.17 GPa for the as-received stainless-steel to 7.77 ± 0.60 GPa for the amorphous microfibers. Subsequent heat-treatment of the microfibers resulted in a nanocrystalline structure with the presence of amorphous regions when the hardness increases even further to 13.5 ± 2.0 GPa. We propose that confinement of both shear transformation zones and dislocations in the heat-treated MG microfibers plays a major role in enhancing strength.",
author = "Elham Sharifikolouei and Baran Sarac and Yonghui Zheng and Piotr Bala and J{\"u}rgen Eckert",
note = "Publisher Copyright: {\textcopyright} 2022, The Author(s).",
year = "2022",
month = jun,
day = "24",
doi = "10.1038/s41598-022-14475-5",
language = "English",
volume = "12.2022",
journal = "Scientific reports (e-only)",
issn = "2045-2322",
publisher = "Nature Publishing Group",

}

RIS (suitable for import to EndNote) - Download

TY - JOUR

T1 - Fabrication of stainless-steel microfibers with amorphous-nanosized microstructure with enhanced mechanical properties

AU - Sharifikolouei, Elham

AU - Sarac, Baran

AU - Zheng, Yonghui

AU - Bala, Piotr

AU - Eckert, Jürgen

N1 - Publisher Copyright: © 2022, The Author(s).

PY - 2022/6/24

Y1 - 2022/6/24

N2 - Metallic glasses (MG) have attracted much attention due to their superior hardness and good corrosion resistance. However, designing new MG compositions is still a big challenge, and their integration into different systems is limited when they are in the shape of bulk materials. Here, we present a new method for the fabrication of MG in the form of microfibers which could greatly help them to be integrated within different systems. The newly proposed technique has the ability to form MG structure from commercially available alloy compositions thanks to its significantly improved quenching rate(~ 108 K.s−1). In this technique, individual melt droplets are ejected on a rotating wheel forming a thin film which are ruptured upon solidification leading to the formation of MG microfibers. In this regard, we have fabricated microfibers from a commercial DIN 1.4401 stainless-steel which could form a completely amorphous structure confirmed by DSC, XRD, and HRTEM. The fabricated MG microfibers show an increased hardness for more than two-fold from 3.5 ± 0.17 GPa for the as-received stainless-steel to 7.77 ± 0.60 GPa for the amorphous microfibers. Subsequent heat-treatment of the microfibers resulted in a nanocrystalline structure with the presence of amorphous regions when the hardness increases even further to 13.5 ± 2.0 GPa. We propose that confinement of both shear transformation zones and dislocations in the heat-treated MG microfibers plays a major role in enhancing strength.

AB - Metallic glasses (MG) have attracted much attention due to their superior hardness and good corrosion resistance. However, designing new MG compositions is still a big challenge, and their integration into different systems is limited when they are in the shape of bulk materials. Here, we present a new method for the fabrication of MG in the form of microfibers which could greatly help them to be integrated within different systems. The newly proposed technique has the ability to form MG structure from commercially available alloy compositions thanks to its significantly improved quenching rate(~ 108 K.s−1). In this technique, individual melt droplets are ejected on a rotating wheel forming a thin film which are ruptured upon solidification leading to the formation of MG microfibers. In this regard, we have fabricated microfibers from a commercial DIN 1.4401 stainless-steel which could form a completely amorphous structure confirmed by DSC, XRD, and HRTEM. The fabricated MG microfibers show an increased hardness for more than two-fold from 3.5 ± 0.17 GPa for the as-received stainless-steel to 7.77 ± 0.60 GPa for the amorphous microfibers. Subsequent heat-treatment of the microfibers resulted in a nanocrystalline structure with the presence of amorphous regions when the hardness increases even further to 13.5 ± 2.0 GPa. We propose that confinement of both shear transformation zones and dislocations in the heat-treated MG microfibers plays a major role in enhancing strength.

UR - http://www.scopus.com/inward/record.url?scp=85132937889&partnerID=8YFLogxK

U2 - 10.1038/s41598-022-14475-5

DO - 10.1038/s41598-022-14475-5

M3 - Article

C2 - 35750707

AN - SCOPUS:85132937889

VL - 12.2022

JO - Scientific reports (e-only)

JF - Scientific reports (e-only)

SN - 2045-2322

M1 - 10784

ER -