Emergence of Coated Piston Ring Scuffing Behavior on an Application-Oriented Tribological Model Test System

Publikationen: Beitrag in FachzeitschriftArtikelForschung(peer-reviewed)

Standard

Emergence of Coated Piston Ring Scuffing Behavior on an Application-Oriented Tribological Model Test System. / Markut, Thomas; Summer, Florian; Pusterhofer, Michael et al.
in: Lubricants, Jahrgang 12.2024, Nr. 6, 218, 14.06.2024.

Publikationen: Beitrag in FachzeitschriftArtikelForschung(peer-reviewed)

Vancouver

Bibtex - Download

@article{00888a4844f3443aaf259e0064dce040,
title = "Emergence of Coated Piston Ring Scuffing Behavior on an Application-Oriented Tribological Model Test System",
abstract = "A major problem in lubricated piston ring/cylinder liner contact sliding systems is the tribological failure mechanisms known as scuffing. In order to evaluate and better understand this damage phenomenon in these tribological systems, a tilted linear tribometer (TE77) for application-oriented reciprocating model tests was developed and validated with scuffed field engine parts. With precise oil lubrication, original engine parts, such as CKS-coated piston rings (chromium-based coating with included aluminum oxides), original liners and fully formulated lubrications, were tested under conditions similar to the most critical part of the internal combustion engines (ICEs), known as fired top dead center (FTDC). Various in situ measurements during the tests allowed for a detailed investigation of the damage processes (crack transformation) on the tribological components. For the coated piston ring, vertical cracks were attributed to residual stresses, while horizontal cracks resulted from shear stresses. The crack transformation and wear results from other studies were confirmed for the liner. The results from FIB (Focused Ion Beam) cuts, along with EDS and SEM analyses, revealed that Fe (deriving from material transfer) acts as a catalyst on the CKS layer for the tribopads and that zinc sulfides are not present everywhere.",
keywords = "application-oriented model test, coated piston ring, grey cast iron, scuffing phenomena",
author = "Thomas Markut and Florian Summer and Michael Pusterhofer and Florian Gr{\"u}n",
note = "Publisher Copyright: {\textcopyright} 2024 by the authors.",
year = "2024",
month = jun,
day = "14",
doi = "10.3390/lubricants12060218",
language = "English",
volume = "12.2024",
journal = "Lubricants",
issn = "2075-4442",
publisher = "Multidisciplinary Digital Publishing Institute (MDPI)",
number = "6",

}

RIS (suitable for import to EndNote) - Download

TY - JOUR

T1 - Emergence of Coated Piston Ring Scuffing Behavior on an Application-Oriented Tribological Model Test System

AU - Markut, Thomas

AU - Summer, Florian

AU - Pusterhofer, Michael

AU - Grün, Florian

N1 - Publisher Copyright: © 2024 by the authors.

PY - 2024/6/14

Y1 - 2024/6/14

N2 - A major problem in lubricated piston ring/cylinder liner contact sliding systems is the tribological failure mechanisms known as scuffing. In order to evaluate and better understand this damage phenomenon in these tribological systems, a tilted linear tribometer (TE77) for application-oriented reciprocating model tests was developed and validated with scuffed field engine parts. With precise oil lubrication, original engine parts, such as CKS-coated piston rings (chromium-based coating with included aluminum oxides), original liners and fully formulated lubrications, were tested under conditions similar to the most critical part of the internal combustion engines (ICEs), known as fired top dead center (FTDC). Various in situ measurements during the tests allowed for a detailed investigation of the damage processes (crack transformation) on the tribological components. For the coated piston ring, vertical cracks were attributed to residual stresses, while horizontal cracks resulted from shear stresses. The crack transformation and wear results from other studies were confirmed for the liner. The results from FIB (Focused Ion Beam) cuts, along with EDS and SEM analyses, revealed that Fe (deriving from material transfer) acts as a catalyst on the CKS layer for the tribopads and that zinc sulfides are not present everywhere.

AB - A major problem in lubricated piston ring/cylinder liner contact sliding systems is the tribological failure mechanisms known as scuffing. In order to evaluate and better understand this damage phenomenon in these tribological systems, a tilted linear tribometer (TE77) for application-oriented reciprocating model tests was developed and validated with scuffed field engine parts. With precise oil lubrication, original engine parts, such as CKS-coated piston rings (chromium-based coating with included aluminum oxides), original liners and fully formulated lubrications, were tested under conditions similar to the most critical part of the internal combustion engines (ICEs), known as fired top dead center (FTDC). Various in situ measurements during the tests allowed for a detailed investigation of the damage processes (crack transformation) on the tribological components. For the coated piston ring, vertical cracks were attributed to residual stresses, while horizontal cracks resulted from shear stresses. The crack transformation and wear results from other studies were confirmed for the liner. The results from FIB (Focused Ion Beam) cuts, along with EDS and SEM analyses, revealed that Fe (deriving from material transfer) acts as a catalyst on the CKS layer for the tribopads and that zinc sulfides are not present everywhere.

KW - application-oriented model test

KW - coated piston ring

KW - grey cast iron

KW - scuffing phenomena

UR - http://www.scopus.com/inward/record.url?scp=85197940067&partnerID=8YFLogxK

U2 - 10.3390/lubricants12060218

DO - 10.3390/lubricants12060218

M3 - Article

AN - SCOPUS:85197940067

VL - 12.2024

JO - Lubricants

JF - Lubricants

SN - 2075-4442

IS - 6

M1 - 218

ER -