Effect of tramp elements on the microstructural evolution of a ferritic-pearlitic steel

Publikationen: Beitrag in FachzeitschriftArtikelForschung

Standard

Effect of tramp elements on the microstructural evolution of a ferritic-pearlitic steel. / Hatzenbichler, Lukas; Vincely, Clement; Haslberger, Phillip et al.
in: Practical metallography = Praktische Metallographie, Jahrgang 62.2025, Nr. 3, 21.02.2025, S. 148-175.

Publikationen: Beitrag in FachzeitschriftArtikelForschung

Bibtex - Download

@article{e2758de43aa141b98793f0c9626fdab9,
title = "Effect of tramp elements on the microstructural evolution of a ferritic-pearlitic steel",
abstract = "Pursuing the reduction of CO 2 emissions, steel industry shifts towards a scrap-based electric arc furnace production that results in elevated levels of tramp elements. The effect of these elements on material properties and microstructure is not understood in detail in advanced microstructural complex steels. This study employs methods to investigate the microstructure of a typical cold headed wire-rod steel, micro-alloyed with vanadium, from blast furnace production and a trial alloy with intentionally increased tramp element concentrations. Light optical microscopy is performed to determine grain sizes of the ferritic-pearlitic microstructure and their phase fractions. The interlamellar spacing of pearlite is explored with scanning electron microscopy. Additionally, the regularity of pearlite lamellae is assessed with a machine learning approach. Thermally etched austenite grains are observed with a high-temperature laser scanning confocal microscope at 1000 °C. A comparison to recalculated prior austenite grains from electron backscatter diffraction patterns is performed. The microstructure after cooling is analyzed by LePera etching and phase maps are obtained by electron back scatter diffraction. The results show that tramp elements do not have an influence on the grain size and phase fractions of the ferritic-pearlitic microstructure in the studied alloy. However, it seems that regular growth of the lamellae is impeded in the trial alloy. Moreover, smaller prior austenite grain sizes are observed and displacive constituents are significantly pronounced, if tramp elements are increased in the alloy.",
keywords = "electron backscatter diffraction, high-temperature laser scanning confocal microscope, machine learning, phase evolution, prior austenite grains, scrap-based steel production, Tramp elements",
author = "Lukas Hatzenbichler and Clement Vincely and Phillip Haslberger and Matthew Galler and Oleksandr Glushko and David Holec and Helmut Clemens and Ronald Schnitzer",
note = "Publisher Copyright: {\textcopyright} 2025 L. Hatzenbichler, C. Vincely, P. Haslberger, M. Galler, O. Glushko, D. Holec, H. Clemens, R. Schnitzer, published by De Gruyter.",
year = "2025",
month = feb,
day = "21",
doi = "10.1515/pm-2025-0010",
language = "English",
volume = "62.2025",
pages = "148--175",
journal = "Practical metallography = Praktische Metallographie",
issn = "0032-678X",
publisher = "Walter de Gruyter GmbH",
number = "3",

}

RIS (suitable for import to EndNote) - Download

TY - JOUR

T1 - Effect of tramp elements on the microstructural evolution of a ferritic-pearlitic steel

AU - Hatzenbichler, Lukas

AU - Vincely, Clement

AU - Haslberger, Phillip

AU - Galler, Matthew

AU - Glushko, Oleksandr

AU - Holec, David

AU - Clemens, Helmut

AU - Schnitzer, Ronald

N1 - Publisher Copyright: © 2025 L. Hatzenbichler, C. Vincely, P. Haslberger, M. Galler, O. Glushko, D. Holec, H. Clemens, R. Schnitzer, published by De Gruyter.

PY - 2025/2/21

Y1 - 2025/2/21

N2 - Pursuing the reduction of CO 2 emissions, steel industry shifts towards a scrap-based electric arc furnace production that results in elevated levels of tramp elements. The effect of these elements on material properties and microstructure is not understood in detail in advanced microstructural complex steels. This study employs methods to investigate the microstructure of a typical cold headed wire-rod steel, micro-alloyed with vanadium, from blast furnace production and a trial alloy with intentionally increased tramp element concentrations. Light optical microscopy is performed to determine grain sizes of the ferritic-pearlitic microstructure and their phase fractions. The interlamellar spacing of pearlite is explored with scanning electron microscopy. Additionally, the regularity of pearlite lamellae is assessed with a machine learning approach. Thermally etched austenite grains are observed with a high-temperature laser scanning confocal microscope at 1000 °C. A comparison to recalculated prior austenite grains from electron backscatter diffraction patterns is performed. The microstructure after cooling is analyzed by LePera etching and phase maps are obtained by electron back scatter diffraction. The results show that tramp elements do not have an influence on the grain size and phase fractions of the ferritic-pearlitic microstructure in the studied alloy. However, it seems that regular growth of the lamellae is impeded in the trial alloy. Moreover, smaller prior austenite grain sizes are observed and displacive constituents are significantly pronounced, if tramp elements are increased in the alloy.

AB - Pursuing the reduction of CO 2 emissions, steel industry shifts towards a scrap-based electric arc furnace production that results in elevated levels of tramp elements. The effect of these elements on material properties and microstructure is not understood in detail in advanced microstructural complex steels. This study employs methods to investigate the microstructure of a typical cold headed wire-rod steel, micro-alloyed with vanadium, from blast furnace production and a trial alloy with intentionally increased tramp element concentrations. Light optical microscopy is performed to determine grain sizes of the ferritic-pearlitic microstructure and their phase fractions. The interlamellar spacing of pearlite is explored with scanning electron microscopy. Additionally, the regularity of pearlite lamellae is assessed with a machine learning approach. Thermally etched austenite grains are observed with a high-temperature laser scanning confocal microscope at 1000 °C. A comparison to recalculated prior austenite grains from electron backscatter diffraction patterns is performed. The microstructure after cooling is analyzed by LePera etching and phase maps are obtained by electron back scatter diffraction. The results show that tramp elements do not have an influence on the grain size and phase fractions of the ferritic-pearlitic microstructure in the studied alloy. However, it seems that regular growth of the lamellae is impeded in the trial alloy. Moreover, smaller prior austenite grain sizes are observed and displacive constituents are significantly pronounced, if tramp elements are increased in the alloy.

KW - electron backscatter diffraction

KW - high-temperature laser scanning confocal microscope

KW - machine learning

KW - phase evolution

KW - prior austenite grains

KW - scrap-based steel production

KW - Tramp elements

UR - http://www.scopus.com/inward/record.url?scp=85219051714&partnerID=8YFLogxK

U2 - 10.1515/pm-2025-0010

DO - 10.1515/pm-2025-0010

M3 - Article

VL - 62.2025

SP - 148

EP - 175

JO - Practical metallography = Praktische Metallographie

JF - Practical metallography = Praktische Metallographie

SN - 0032-678X

IS - 3

ER -