Discrete element modelling of ordinary refractory ceramics under cold crushing testing: Influence of minimum element size
Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)
Autoren
Organisationseinheiten
Externe Organisationseinheiten
- ITASCA Consultants S.A.S
Abstract
Ordinary refractory ceramics comprise aggregates and fines of different sizes. Reasonable representation of fines in discrete element models is important for computation efficiency and obtaining representative results. In this study, different minimum element sizes were stochastically defined to represent the fines in ordinary refractory ceramics, and their influences on the model structure, load/strain curves, and crack events were investigated under the same interface properties and with circular elements. It was concluded that the coordination number of a discrete element (DE) model increases with increasing minimum element size as well as cold crushing strength when the minimum element size is larger than 100 μm. Mild scattering of cold crushing strength can be achieved with a minimum element size of less than 10 μm. Furthermore, tensile and shear failures occur in the models with the present property definitions. The cold crushing strengths and crack densities in the models with different element size ranges followed normal distributions.
Details
Originalsprache | Englisch |
---|---|
Seiten (von - bis) | 17934-17941 |
Seitenumfang | 8 |
Fachzeitschrift | Ceramics International |
Jahrgang | 48.2022 |
Ausgabenummer | 12 |
Frühes Online-Datum | 14 März 2022 |
DOIs | |
Status | Veröffentlicht - 15 Juni 2022 |