TY - THES

T1 - Design of a Novel Protector for Sucker Rod Pumps Using Wire Rope

AU - Albishini, Ramzy

N1 - embargoed until 06-09-2024

PY - 2019

Y1 - 2019

N2 - The invention of the rod guide or protector, whether used in reciprocating or rotating sucker rod strings, is meant not only to centralize the rod strings but also to serve as a paraffin scrapper. Since 1927, rod guides have changed considerably in terms of the materials used and design, in order to provide more protection for rod strings as well as tubing, hence, increasing the mean time between failures (MTBF). The purpose of this study is to provide a design for protectors, used specifically for wire ropes which activate downhole pumps. Since the rod rotator cannot be utilized in a sucker rod pump using wire ropes, the protector was designed with four ribs forming circumferential scraping effect with 360° on the interior wall of the tubing. This protector consists of two identical parts that can be installed on the wire rope in the field. CFD simulations were performed with the software Ansys to define the proper length and diameter of the designed protector, which led to acceptable pressure drops and erodible wear volume.

AB - The invention of the rod guide or protector, whether used in reciprocating or rotating sucker rod strings, is meant not only to centralize the rod strings but also to serve as a paraffin scrapper. Since 1927, rod guides have changed considerably in terms of the materials used and design, in order to provide more protection for rod strings as well as tubing, hence, increasing the mean time between failures (MTBF). The purpose of this study is to provide a design for protectors, used specifically for wire ropes which activate downhole pumps. Since the rod rotator cannot be utilized in a sucker rod pump using wire ropes, the protector was designed with four ribs forming circumferential scraping effect with 360° on the interior wall of the tubing. This protector consists of two identical parts that can be installed on the wire rope in the field. CFD simulations were performed with the software Ansys to define the proper length and diameter of the designed protector, which led to acceptable pressure drops and erodible wear volume.

KW - sucker rod pumping

KW - artificial lift systems

KW - wire rope

KW - rod guide

KW - EWV

KW - CFD

KW - Gestängetiefpumpe

KW - Artificial Lift Systems

KW - Drahtseile

KW - Stangen-Protektor

KW - Erodierbares Volumen

U2 - 10.34901/mul.pub.2024.195

DO - 10.34901/mul.pub.2024.195

M3 - Master's Thesis

ER -