Case study: is „the catch-all-plastics bin“ useful in unlocking the hidden resource potential in the residual waste collection system?

Publikationen: Beitrag in FachzeitschriftArtikelForschung(peer-reviewed)

Externe Organisationseinheiten

  • Amt der NÖ Landesregierung, Abteilung Umwelt- und Energiewirtschaft

Abstract

Austria’s performance in the collection of separated waste is adequate. However, the residual waste still contains substantial amounts of recyclable materials – for example, plastics, paper and board, glass and composite packaging. Plastics (lightweight packaging and similar non-packaging materials) are detected at an average mass content of 13% in residual waste. Despite this huge potential, only 3% of the total amount of residual waste (1,687,000 t y−1) is recycled. This implies that most of the recyclable materials contained in the residual waste are destined for thermal recovery and are lost for recycling. This pilot project, commissioned by the Land of Lower Austria, applied a holistic approach, unique in Europe, to the Lower Austrian waste management system. It aims to transfer excess quantities of plastic packaging and non-packaging recyclables from the residual waste system to the separately collected waste system by introducing a so-called ‘catch-all-plastics bin’. A quantity flow model was constructed and the results showed a realistic increase in the amount of plastics collected of 33.9 wt%. This equals a calculated excess quantity of 19,638 t y−1. The increased plastics collection resulted in a positive impact on the climate footprint (CO2 equivalent) in line with the targets of EU Directive 94/62/EG (Circular Economy Package) and its Amendments. The new collection system involves only moderate additional costs.

Details

OriginalspracheEnglisch
Seiten (von - bis)155-162
Seitenumfang8
FachzeitschriftWaste management & research
Jahrgang35.2017
Ausgabenummer2
DOIs
StatusVeröffentlicht - Feb. 2017