Capacity of hydrogen traps affects H-assisted crack initiation and propagation mechanisms in martensitic steels

Publikationen: Beitrag in FachzeitschriftArtikelForschung(peer-reviewed)

Standard

Capacity of hydrogen traps affects H-assisted crack initiation and propagation mechanisms in martensitic steels. / Safyari, Mahdieh; Bhosale, Saurabh; Moshtaghi, Masoud.
in: Engineering Failure Analysis, Jahrgang 163.2024, Nr. Part B, September, 108560, 16.06.2024.

Publikationen: Beitrag in FachzeitschriftArtikelForschung(peer-reviewed)

Vancouver

Safyari M, Bhosale S, Moshtaghi M. Capacity of hydrogen traps affects H-assisted crack initiation and propagation mechanisms in martensitic steels. Engineering Failure Analysis. 2024 Jun 16;163.2024(Part B, September):108560. doi: 10.1016/j.engfailanal.2024.108560

Bibtex - Download

@article{a101250b73ce450d9b49bfac94a9f187,
title = "Capacity of hydrogen traps affects H-assisted crack initiation and propagation mechanisms in martensitic steels",
abstract = "Low-carbon martensitic steels are candidate materials for different hydrogen applications. Hydrogen embrittlement (HE) of the steels can be mitigated by designing trap site characteristics. In this study, the different capacities of hydrogen trapping, and reversibility of the trap sites are studied to reveal the extent of HE susceptibility of the steels and H-assisted crack initiation and propagation mechanisms. The trap sites in Ti-contained and Mo-contained martensitic steels were identified and discussed. The trap sites in Ti-contained martensitic steel include basic martensitic microstructure, the interface of the TiC/matrix interface and carbon vacancies inside the TiC carbides. The trap sites in Mo-contained martensitic steel including basic martensitic microstructure and interface of the Mo 2C/matrix interface. Ti-contained steel indicates a mitigated HE susceptibility, controlled by carbon vacancies inside TiC acting as strong hydrogen trap sites, and a higher possibility of building up a critical hydrogen content at Mo 2C carbide due to lower hydrogen capacity. These results prove that hydrogen trapping capacity at the designated hydrogen trap sites is a determinant factor for H-assisted crack initiation and propagation in martensitic steels. A critical local hydrogen amount should be built up at the trap site to assist the crack to develop. It was also revealed that crack initiation originated from Mo 2C carbides accompanied by interfacial decohesion at the interface of martensitic matrix/Mo 2C carbides and propagated in quasi-cleavage patterns along {0 1 1} planes.",
keywords = "Crack initiation, Crack propagation, Hydrogen embrittlement, Hydrogen trapping capacity, Martensitic steels",
author = "Mahdieh Safyari and Saurabh Bhosale and Masoud Moshtaghi",
note = "Publisher Copyright: {\textcopyright} 2024 The Author(s)",
year = "2024",
month = jun,
day = "16",
doi = "10.1016/j.engfailanal.2024.108560",
language = "English",
volume = "163.2024",
journal = "Engineering Failure Analysis",
issn = "1350-6307",
publisher = "Elsevier",
number = "Part B, September",

}

RIS (suitable for import to EndNote) - Download

TY - JOUR

T1 - Capacity of hydrogen traps affects H-assisted crack initiation and propagation mechanisms in martensitic steels

AU - Safyari, Mahdieh

AU - Bhosale, Saurabh

AU - Moshtaghi, Masoud

N1 - Publisher Copyright: © 2024 The Author(s)

PY - 2024/6/16

Y1 - 2024/6/16

N2 - Low-carbon martensitic steels are candidate materials for different hydrogen applications. Hydrogen embrittlement (HE) of the steels can be mitigated by designing trap site characteristics. In this study, the different capacities of hydrogen trapping, and reversibility of the trap sites are studied to reveal the extent of HE susceptibility of the steels and H-assisted crack initiation and propagation mechanisms. The trap sites in Ti-contained and Mo-contained martensitic steels were identified and discussed. The trap sites in Ti-contained martensitic steel include basic martensitic microstructure, the interface of the TiC/matrix interface and carbon vacancies inside the TiC carbides. The trap sites in Mo-contained martensitic steel including basic martensitic microstructure and interface of the Mo 2C/matrix interface. Ti-contained steel indicates a mitigated HE susceptibility, controlled by carbon vacancies inside TiC acting as strong hydrogen trap sites, and a higher possibility of building up a critical hydrogen content at Mo 2C carbide due to lower hydrogen capacity. These results prove that hydrogen trapping capacity at the designated hydrogen trap sites is a determinant factor for H-assisted crack initiation and propagation in martensitic steels. A critical local hydrogen amount should be built up at the trap site to assist the crack to develop. It was also revealed that crack initiation originated from Mo 2C carbides accompanied by interfacial decohesion at the interface of martensitic matrix/Mo 2C carbides and propagated in quasi-cleavage patterns along {0 1 1} planes.

AB - Low-carbon martensitic steels are candidate materials for different hydrogen applications. Hydrogen embrittlement (HE) of the steels can be mitigated by designing trap site characteristics. In this study, the different capacities of hydrogen trapping, and reversibility of the trap sites are studied to reveal the extent of HE susceptibility of the steels and H-assisted crack initiation and propagation mechanisms. The trap sites in Ti-contained and Mo-contained martensitic steels were identified and discussed. The trap sites in Ti-contained martensitic steel include basic martensitic microstructure, the interface of the TiC/matrix interface and carbon vacancies inside the TiC carbides. The trap sites in Mo-contained martensitic steel including basic martensitic microstructure and interface of the Mo 2C/matrix interface. Ti-contained steel indicates a mitigated HE susceptibility, controlled by carbon vacancies inside TiC acting as strong hydrogen trap sites, and a higher possibility of building up a critical hydrogen content at Mo 2C carbide due to lower hydrogen capacity. These results prove that hydrogen trapping capacity at the designated hydrogen trap sites is a determinant factor for H-assisted crack initiation and propagation in martensitic steels. A critical local hydrogen amount should be built up at the trap site to assist the crack to develop. It was also revealed that crack initiation originated from Mo 2C carbides accompanied by interfacial decohesion at the interface of martensitic matrix/Mo 2C carbides and propagated in quasi-cleavage patterns along {0 1 1} planes.

KW - Crack initiation

KW - Crack propagation

KW - Hydrogen embrittlement

KW - Hydrogen trapping capacity

KW - Martensitic steels

UR - http://www.scopus.com/inward/record.url?scp=85196868378&partnerID=8YFLogxK

U2 - 10.1016/j.engfailanal.2024.108560

DO - 10.1016/j.engfailanal.2024.108560

M3 - Article

VL - 163.2024

JO - Engineering Failure Analysis

JF - Engineering Failure Analysis

SN - 1350-6307

IS - Part B, September

M1 - 108560

ER -