Joamin Gonzalez-Gutierrez
(Ehemalig)
Lehrstuhl für Kunststoffverarbeitung (350)
Telefon: 3541
Anstellung
Lehrstuhl für Kunststoffverarbeitung (350)
Montanuniversität Leoben (000)Leoben
4 März 2021 → 31 Mai 2021
Lehrstuhl für Kunststoffverarbeitung (350)
Montanuniversität Leoben (000)Leoben
1 März 2020 → 3 März 2021
Lehrstuhl für Kunststoffverarbeitung (350)
Montanuniversität Leoben (000)Leoben
29 Feb. 2020 → 3 März 2021
Lehrstuhl für Kunststoffverarbeitung (350)
Montanuniversität Leoben (000)Leoben
15 Juni 2018 → 28 Feb. 2020
Lehrstuhl für Kunststoffverarbeitung (350)
Montanuniversität Leoben (000)Leoben
1 März 2018 → 14 Juni 2018
Lehrstuhl für Kunststoffverarbeitung (350)
Montanuniversität Leoben (000)Leoben
4 März 2015 → 28 Feb. 2018
Forschungsoutput
Multi-Material Implant Structures with Medical-Grade Polyurethane via Additive Manufacturing
Hentschel, L., Petersmann, S., Gradischar, A., Lebschy, C., Lindenmann, J., Smolle-Juettner, F., Gonzalez-Gutierrez, J., Dias, A., Kynast, F., Hammer, N., Schäfer, U. & Holzer, C., 8 Mai 2024, in: AIP Conference Proceedings. 3158, 1, 150005.Development of Material and Processing Parameters for AM
Ureña, J., Blasco, J. R., Jordá, O., Martínez, M., Portolés, L., Gonzalez-Gutierrez, J. & Schuschnigg, S., 2024, Springer Tracts in Additive Manufacturing. Springer Nature, S. 231-306 76 S. (Springer Tracts in Additive Manufacturing; Band Part F3252).Introduction to Additive Manufacturing
Godec, D., Pilipović, A., Breški, T., Ureña, J., Jordá, O., Martínez, M., Gonzalez-Gutierrez, J., Schuschnigg, S., Blasco, J. R. & Portolés, L., 2024, Springer Tracts in Additive Manufacturing. Springer Nature, S. 1-44 44 S. (Springer Tracts in Additive Manufacturing; Band Part F3252).The effect of coalescence and diffusion on the part generation in the ARBURG plastic freeforming
Hentschel, L., Maurer, C., Gonzalez-Gutierrez, J., Kynast, F., Schäfer, U. & Holzer, C., 7 Sept. 2023, S. 1-1. 1 S.Effects of Different Polypropylene (PP)-Backbones in Aluminium Feedstock for Fused Filament Fabrication (FFF)
Momeni, V., Shahroodi, Z., Gonzalez-Gutierrez, J., Hentschel, L., Duretek, I., Schuschnigg, S., Kukla, C. & Holzer, C., 11 Juli 2023, in: Polymers. 15.2023, 4, 18 S., 3007.Current challenges in NdFeB permanent magnets manufacturing by Powder Injection Molding (PIM): A review
Crozier-Bioud, T., Momeni, V., Gonzalez-Gutierrez, J., Kukla, C., Luca, S. & Rolere, S., Mai 2023, in: Materials today. Physics. 34.2023, May, 13 S., 101082.In-situ alignment of 3D printed anisotropic hard magnets
Suppan, M., Huber, C., Mathauer, K., Abert, C., Bruckner, F., Gonzalez-Gutierrez, J., Schuschnigg, S., Groenefeld, M., Teliban, I., Kobe, S., Saje, B. & Suess, D., 20 Okt. 2022, in: Scientific reports (London : Nature Publishing Group). 12.2022, October, 6 S., 17590.A Guide to Additive Manufacturing
Godec, D. (Herausgeber), Gonzalez-Gutierrez, J. (Herausgeber), Nordin, A. (Herausgeber), Pei, E. (Herausgeber) & Alcázar, J. U. (Herausgeber), 14 Sept. 2022, 1 Aufl. 324 S. (Springer Tracts in Additive Manufacturing)Parameter Optimization of the ARBURG Plastic Freeforming Process by Means of a Design of Experiments Approach
Hentschel, L., Petersmann, S., Gonzalez-Gutierrez, J., Kynast, F., Schäfer, U., Arbeiter, F. & Holzer, C., 31 Mai 2022, in: Advanced engineering materials. 24.2022, 11 S., 2200279.The Effects of Washing and Formaldehyde Sterilization on the Mechanical Performance of Poly(methyl Methacrylate) (PMMA) Parts Produced by Material Extrusion-Based Additive Manufacturing or Material Jetting
Petersmann, S., Hentschel, L., Gonzalez-Gutierrez, J., Tödtling, M., Schäfer, U., Arbeiter, F. & Üçal, M., 13 Mai 2022, in: Advanced engineering materials. 24.2022, 2200225.Material extrusion additively manufactured alumina monolithic structures to improve the efficiency of plasma-catalytic oxidation of toluene
Li, T., Gonzalez-Gutierrez, J., Raguz, I., Holzer, C., Li, M., Cheng, P., Kitzmantel, M., Shi, L. & Huang, L., 10 Nov. 2021, (Elektronische Veröffentlichung vor Drucklegung.) in: Additive Manufacturing. 37.2021, January, 9 S., 101700.Effect of metal particle size and powder volume fraction on the filling performance of powder injection moulded parts with a microtextured surface
Ammosova, L., Cano Cano, S., Schuschnigg, S., Kukla, C., Mönkkönen, K., Suvanto, M. & Gonzalez-Gutierrez, J., Nov. 2021, in: Precision Engineering. 72.2021, November, S. 604-612 9 S.Material extrusion additive manufacturing of multi-material components
Cano Cano, S., Valy, L., Liu, D., Maurer, P., Ma, N., Czernilofsky, F., Schuschnigg, S., Sui, G., Kitzmantel, M., Kukla, C. & Gonzalez-Gutierrez, J., 15 Sept. 2021, 29th Leoben-Conference on Polymer Engineering & Science. S. 184 1 S.Fused Filament Fabrication-Based Additive Manufacturing of Commercially Pure Titanium
Thompson, Y., Polzer, M., Gonzalez-Gutierrez, J., Kasian, O., Heckl, J. P., Dalbauer, V., Kukla, C. & Felfer, P., 12 Sept. 2021, in: Advanced Engineering Materials. 23.2021, 12, 12 S., 2100380.Indirect Additive Manufacturing Techniques for Metal Parts: Binder-Based Additive Manufacturing Techniques
Gonzalez-Gutierrez, J., 1 Sept. 2021, Encyclopedia of Materials: Metals and Alloys. The Netherlands: Elsevier, S. 319-329 11 S.Bending Properties of Lightweight Copper Specimens with Different Infill Patterns Produced by Material Extrusion Additive Manufacturing, Solvent Debinding and Sintering
Gonzalez-Gutierrez, J., Cano Cano, S., Ecker, J. V., Kitzmantel, M., Arbeiter, F., Kukla, C. & Holzer, C., 6 Aug. 2021, in: Applied Sciences : open access journal. 11, 16, 7262.Functionally graded additive manufacturing
Pei, E., Rumana Kabir, I., Godec, D., Gonzalez-Gutierrez, J. & Nordin, A., 9 Apr. 2021, Additive Manufacturing with Functionalized Nanomaterials: Micro and Nono Technologies. Amsterdam, Neterlands: Elsevier, S. 35-54 20 S.Resins for Frontal Photopolymerization: Combining depth-cure and tunable mechanical properties
Ebner, C., Mitterer, J., Gonzalez-Gutierrez, J., Rieß, G. & Kern, W., 5 Feb. 2021, in: Materials. 14.2021, 4, 10 S., 743.Powder content in powder extrusion moulding of tool steel: Dimensional stability, shrinkage and hardness
Gonzalez-Gutierrez, J., Thompson, Y., Handl, D., Cano Cano, S., Schuschnigg, S., Felfer, P., Kukla, C., Holzer, C. & Burkhardt, C., 15 Jan. 2021, in: Materials letters. 283, January 2021, 5 S., 128909.Advanced processing of thermoplastic-based particulate composites
Gonzalez-Gutierrez, J., 2021Effect of backbone selection on the solvent debinding of metal injection moulding feedstocks
Kukla, C., Cano, S., Schuschnigg, S., Holzer, C. & Gonzalez-Gutierrez, J., 2021, Euro PM2021 Congress Proceedings. (Euro PM2021 Congress Proceedings).Processing Conditions of a Medical Grade Poly(Methyl Methacrylate) with the Arburg Plastic Freeforming Additive Manufacturing Process
Hentschel, L., Kynast, F., Petersmann, S., Holzer, C. & Gonzalez-Gutierrez, J., 2 Nov. 2020, in: Polymers. 12, 11, S. 1-15 15 S., 2677.Rheological Behaviour of Highly Filled Materials for Injection Moulding and Additive Manufacturing: Effect of Particle Material and Loading
Bek, M., Gonzalez-Gutierrez, J., Kukla, C., Pušnik Crešnar, K., Maroh, B. & Slemenik Perše, L., 2 Nov. 2020, in: Applied Sciences : open access journal. 10, 22, S. 1-23 23 S., 7993.Factors Affecting the Properties of POM-based Feedstocks for Fused Filament Fabrication/FFF
Kukla, C., Hentschel, L., Cano Cano, S., Kitzmantel, M., Holzer, C. & Gonzalez-Gutierrez, J., 5 Okt. 2020. 6 S.Eingliederung von Additiven Fertigungstechnologien in einen klinischen Prozess zur Herstellung von medizinischen Implantaten
Hentschel, L., Gonzalez-Gutierrez, J. & Holzer, C., 1 Okt. 2020, in: Jahresmagazin Kunststofftechnik : Ingenieurwissenschaften ... : im Fokus . 2020, S. 56-61Influence of the Infill Orientation on the Properties of Zirconia Parts Produced by Fused Filament Fabrication
Cano Cano, S., Lube, T., Huber, P., Gallego, A., Naranjo, J. A., Berges, C., Schuschnigg, S., Herranz, G., Kukla, C., Holzer, C. & Gonzalez-Gutierrez, J., 15 Juli 2020, in: Materials. 13.2020, 14, 19 S., 3158.An Overview of Material Extrusion Troubleshooting
Loh, G. H., Pei, E., Gonzalez-Gutierrez, J. & Monzon, M., 11 Juli 2020, in: Applied Sciences : open access journal. 10, 14, 28 S., 4776.Research and Implementation of Axial 3D Printing Method for PLA Pipes
Zhang, H., Zhong, W., Hu, Q., Aburaia, M., Gonzalez-Gutierrez, J. & Lammer, H., 7 Juli 2020, in: Applied Sciences : open access journal. 10.2020, 13, 19 S., 4680.Additive Manufacturing of Steel and Copper Using Fused Layer Modelling: Material and Process Development
Ecker, J. V., Dobrezberger, K., Gonzalez-Gutierrez, J., Spoerk, M., Gierl-Mayer, C. & Danninger, H., 15 Juni 2020, (Elektronische Veröffentlichung vor Drucklegung.) in: Powder metallurgy progress. 19.2019, 2, S. 63-81 19 S.A Production Method for Standardized Continuous Fiber Reinforced FFF Filament
Aburaia, M., Bucher, C., Lackner, M., Gonzalez-Gutierrez, J., Zhang, H. & Lammer, H., 20 Mai 2020, in: Biomaterials and Medical Applications. 4.2020, 1, 9 S.Qualifizierung von Materialien für medizinische Anwendungen mittels des Arburg Freeformers
Holzer, C., Hentschel, L., Kynast, F., Schuschnigg, S. & Gonzalez-Gutierrez, J., 15 Mai 2020. 2 S.Modification of Interfacial Interactions in Ceramic-Polymer Nanocomposites by Grafting: Morphology and Properties for Powder Injection Molding and Additive Manufacturing
Cano Cano, S., Gooneie, A., Kukla, C., Rieß, G., Holzer, C. & Gonzalez-Gutierrez, J., 21 Feb. 2020, in: Applied Sciences : open access journal. 10.2020, 4, 18 S., 1471.Optimization of the 3D Printing Parameters for Tensile Properties of Specimens Produced by Fused Filament Fabrication of 17-4PH Stainless Steel
Godec, D., Cano Cano, S., Holzer, C. & Gonzalez-Gutierrez, J., 8 Feb. 2020, in: Materials. 13.2020, 3, 23 S., 774.Destroying or Enhancing the Mechanical Properties of Carbon Fibre Filled PA12 filaments for Additive Manufacturing?
Holzer, C., Gonzalez-Gutierrez, J., Cano Cano, S., Schuschnigg, S., Arbeiter, F., Liu, D., Wuzella, G. H. & Lammer, H., 7 Nov. 2019, S. 59-59. 1 S.Influence of stearic acid in feedstocks for FFF and PIM
Kukla, C., Cano Cano, S., Holzer, C. & Gonzalez-Gutierrez, J., 16 Okt. 2019.Material extrusion-based additive manufacturing of polypropylene: A review on how to improve dimensional inaccuracy and warpage
Spörk, M., Holzer, C. & Gonzalez-Gutierrez, J., 15 Okt. 2019, (Elektronische Veröffentlichung vor Drucklegung.) in: Journal of applied polymer science. 137.2020, 12, 16 S., 48454.Steel parts produced by material extrusion additive manufacturing, solvent debinding and sintering
Gonzalez-Gutierrez, J., Thompson, Y., Cano Cano, S., Felfer, P., Kukla, C. & Holzer, C., 30 Sept. 2019, Materials Science and Technology 2019 Conference Proceedings. S. 264-266 3 S. 139-137130Fused filament fabrication, debinding and sintering as a low cost additive manufacturing method of 316L stainless steel
Thompson, Y., Gonzalez-Gutierrez, J., Kukla, C. & Felfer, P., 9 Sept. 2019, in: Additive Manufacturing. 30.2019, December, 8 S., 100861.Mechanical Recyclability of Polypropylene Composites Produced by Material Extrusion-Based Additive Manufacturing
Spörk, M., Arbeiter, F., Raguz, I., Holzer, C. & Gonzales-Gutierrez, J., 7 Aug. 2019, in: Polymers. 11.2019, 8, 18 S., 1318.Fabrication and properties of extrusion-based 3D-printed hardmetal and cermet components
Lengauer, W., Duretek, I., Fürst, M., Schwarz, V., Gonzalez-Gutierrez, J., Schuschnigg, S., Kukla, C., Kitzmantel, M., Neubauer, E., Lieberwirth, C. & Morrison, V., 1 Aug. 2019, in: International Journal of Refractory Metals and Hard Materials. 82.2019, August, S. 141-149 9 S.Fused Filament Fabrication of Metals and Ceramics for Special Applications
Cano Cano, S., Holzer, C., Gonzalez-Gutierrez, J., Kukla, C. & Schuschnigg, S., 1 Aug. 2019, 9 Aufl. Leykam Buchverlag. 15 S. (Industrial Management; Nr. 9)Post processing of polymeric cranial implants produced by material extrusion based additive manufacturing
Holzer, C., Gonzalez-Gutierrez, J., Petersmann, S., Pichelmayer, M. & von Campe, G., 9 Juli 2019. 1 S.A trouble‐free first layer adhesion for polypropylene‐based materials in material extrusion‐based additive manufacturing
Spörk, M., Gonzalez-Gutierrez, J., Lichal, C., Cajner, H., Berger-Weber, G., Schuschnigg, S., Cardon, L. & Holzer, C., 31 Mai 2019, S. 327. 1 S.Debinding behaviour of feedstock for material extrusion additive manufacturing of zirconia
Kukla, C., Cano Cano, S., Kaylani, D., Schuschnigg, S., Holzer, C. & Gonzalez-Gutierrez, J., 15 Mai 2019, in: Powder Metallurgy. 2019, 9 S.Rheological behaviour of highly-filled polymers for Metal Injection Moulding
Kukla, C., Slemenik Perše, L., Bek, M., Gonzalez-Gutierrez, J. & Holzer, C., 9 Apr. 2019. 1 S.Optimisation of the interfacial bonding in polypropylene filled with different types of glass spheres produced by extrusion-based additive manufacturing
Spörk, M. & Gonzalez-Gutierrez, J., 8 Apr. 2019, S. 87-87. 1 S.Rheological behaviour of highly-filled polymers for Metal Injection Moulding
Bek, M., Gonzalez-Gutierrez, J., Slemenik Perše, L., Holzer, C. & Kukla, C., 8 Apr. 2019, S. 117-117. 1 S.Tensile properties of sintered 17-4PH stainless steel fabricated by material extrusion additive manufacturing
Gonzalez-Gutierrez, J., Arbeiter, F., Schlauf, T., Kukla, C. & Holzer, C., 8 Apr. 2019, in: Materials letters. 248.2019, 1 August, S. 165-168 4 S.Filament-extrusion 3D printing of hardmetal and cermet parts
Lengauer, W., Duretek, I., Fürst, M., Gonzalez-Gutierrez, J., Schuschnigg, S. & Kukla, C., 25 März 2019, S. 77-78. 2 S.Additive manufacturing of zirconia parts by fused filament fabrication and solvent debinding: Selection of binder formulation
Cano Cano, S., Gonzalez-Gutierrez, J., Sapkota, J., Spörk, M., Arbeiter, F., Schuschnigg, S., Holzer, C. & Kukla, C., 1 März 2019, in: Additive Manufacturing. 26.2019, March, S. 117–128 12 S.Design and fabrication of monolithic catalyst for plasma-catalytic oxidation of toluene
Huang, L., Zheng, M., Jiang, W., Shi, L., Gonzalez-Gutierrez, J. & Holzer, C., 20 Okt. 2018. 1 S.Rheology of Highly Filled Polymers
Kukla, C., Duretek, I., Gonzalez-Gutierrez, J. & Holzer, C., 3 Okt. 2018, Polymer Rheology. Rivera-Armenta, J. L. & Salazar-Cruz, B. A. (Hrsg.). London, United Kingdom, S. 153- 173 21 S.Influence of filler types onto the viscosity of highly filled polymers.
Kukla, C., Slemenik Perše, L., Bek, M., Gonzalez-Gutierrez, J. & Holzer, C., 19 Sept. 2018, International Conference on Polymers and Moulds Innovations: Conference Proceedings. Pontes, A. (Hrsg.). Guimaraes, Portugal, Band 8. 6 S. P120Rheology and mechanical properties of fats: Second Edition
Gonzalez-Gutierrez, J. & Scanlon, M. G., 14 Juni 2018, Structure-Function Analysis of Edible Fats: Second Edition. Marangoni, A. G. (Hrsg.). 2 Aufl. United Kingdom, S. 119 - 168 50 S.Adhesion of standard filament materials to different build platforms in material extrusion additive manufacturing
Schuschnigg, S., Gonzalez-Gutierrez, J., Spörk, M., Sapkota, J. & Holzer, C., 21 Mai 2018, 34 th International Conference of the Polymer Processing society. Liu, S.-J. (Hrsg.). Taipei, Taiwan, Band 34. 1 S.Additive Manufacturing of Metallic and Ceramic Components by the Material Extrusion of Highly-Filled Polymers: A Review and Future Perspectives
Gonzalez-Gutierrez, J., Cano Cano, S., Schuschnigg, S., Kukla, C., Sapkota, J. & Holzer, C., 18 Mai 2018, in: Materials. 11.2018, 5, 36 S., 840.Optimisation of the Adhesion of Polypropylene-Based Materials during Extrusion-Based Additive Manufacturing
Spörk, M., Gonzalez-Gutierrez, J., Lichal, C., Cajner, H., Berger, G., Schuschnigg, S., Cardon, L. & Holzer, C., 2 Mai 2018, in: Polymers. 10.2018, 5, 16 S., 490.Feedstocks for the Shaping-Debinding-Sintering Process of Multi Material Components
Cano Cano, S., Kukla, C., Kaylani, D., Schuschnigg, S., Holzer, C. & Gonzalez-Gutierrez, J., 19 Apr. 2018, S. 1. 1 S.Feedstocks for the Shaping-Debinding-Sintering Process of Multi Material Components
Cano Cano, S., Kukla, C., Kaylani, D., Schuschnigg, S., Holzer, C. & Gonzalez-Gutierrez, J., 19 Apr. 2018, 27. Leobener Kunststoff-Kolloquium: Print & Coat- Polymere in Druck- und Beschichtungstechnologien. Kern, W. (Hrsg.). Leoben, Band 27. S. 255 -256 2 S.Highly-filled Polymers for Fused Filament Fabrication
Gonzalez-Gutierrez, J., Cano Cano, S., Schuschnigg, S., Holzer, C. & Kukla, C., 19 Apr. 2018, 27. Leobener Kunststoff-Kolloquium: Print & Coat- Polymere in Druck- und Beschichtungstechnologien. Kern, W. (Hrsg.). Leoben, Band 27. S. 93-102 10 S.Material Extrusion Additive Manufacturing for Photocatalytic Applications
Gonzalez-Gutierrez, J., Jiang, W., Lichal, C., Schuschnigg, S., Huang, L. & Holzer, C., 19 Apr. 2018, S. 1. 1 S.Material Extrusion Additive Manufacturing for Photocatalytic Applications
Gonzalez-Gutierrez, J., Jiang, W., Lichal, C., Schuschnigg, S., Huang, L. & Holzer, C., 19 Apr. 2018, 27. Leobener Kunststoff-Kolloquium: Print & Coat- Polymere in Druck- und Beschichtungstechnologien. Kern, W. (Hrsg.). Leoben, Band 27. S. 259-260 2 S.Special Binder Systems for Metal Powders in Highly Filled Filaments for Fused Filament Fabrication
Gonzalez-Gutierrez, J., Cano Cano, S., Ecker, J., Arbeiter, F., Burkhardt, C., Hampel, S., Kukla, C. & Holzer, C., 14 Dez. 2017, S. 1. 1 S.Special Binder Systems for the Use with Metal Powders for Highly Filled Filaments for Fused Filament Fabrication
Gonzalez-Gutierrez, J., Kukla, C., Arbeiter, F. & Holzer, C., 14 Dez. 2017, 33rd Annual Meeting of the Polymer Processing Society. Cancun, Mexico, Band 33. 1 S.Isotropic NdFeB hard magnets: MIM production using recycled powders with and without Nd additions
Burkhardt, C., Weber, O., Podmiljsak, B., Gonzalez-Gutierrez, J., Kukla, C., Degri, M., Harris, I. R. & Walton, A., 1 Dez. 2017, in: Powder injection moulding international. 11, 4, S. 75-81 7 S.3D printing conditions determination for feedstock used in fused filament fabrication (FFF) of 17-4PH stainless steel parts
Gonzalez-Gutierrez, J., Godec, D., Guran, R., Spörk, M., Kukla, C. & Holzer, C., 15 Nov. 2017, in: Metalurgija : casopis Izdaje Tehnoloski Fakultet Sveucilista u Zagrebu, Odjeli u Sisku, Institut za Metalurgiju i Zeljezara Sisak = Metallurgy. 57.2018, 1-2, S. 117-120 4 S., 669.15:621.775:669.015:66.049.4:621.385.833=111.Feedstocks for metal injection moulding: Effect of particle charcateristics and binder composition on the rheological properties and the morphology of metal injection moulding feedstocks
Kukla, C. & Gonzalez-Gutierrez, J., 15 Nov. 2017, WerWasWo.Forschung@MUL 2017. Schuschnigg, S. (Hrsg.). 6 Aufl. Leoben, Austria, S. 127 1 S.Flexible Production via 3D Printing: Development of a sustainable, stable and flexible manufacturing process (3D printing) for complex metallic and ceramic components in a waste-free but industrially viable process
Sapkota, J. & Gonzalez-Gutierrez, J., 15 Nov. 2017, WerWasWo.Forschung@MUL 2017. Schuschnigg, S. (Hrsg.). 6 Aufl. Leoben, Austria, S. 190 1 S.Resource Efficient Production of Magnets: Utilization of recycled rare earth magnetic material for the production of magnets with complex structure and geometry via additive manufacturing and metal injection moulding
Gonzalez-Gutierrez, J. & Kukla, C., 15 Nov. 2017, WerWasWo.Forschung@MUL 2017. Schuschnigg, S. (Hrsg.). 6 Aufl. Leoben, Austria, S. 78 1 S.Effect of the printing bed temperature on the adhesion of parts produced by fused filament fabrication
Spörk, M., Gonzalez-Gutierrez, J., Sapkota, J., Schuschnigg, S. & Holzer, C., 8 Nov. 2017, in: Plastics, rubber and composites. 47.2018, 1, S. 17-24 8 S.The production of magnets by FFF - Fused Filament Fabrication
Kukla, C., Gonzalez-Gutierrez, J., Burkhardt, C., Weber, O. & Holzer, C., 1 Okt. 2017, Euro PM2017 Congress & Exhibition. Milan, Italy: European Powder Metallurgy Association, 6 S.Development of highly-filled polymer compounds for fused filament fabrication of ceramics and solvent debinding
Cano Cano, S., Gonzalez-Gutierrez, J., Sapkota, J., Kukla, C. & Holzer, C., 27 Juni 2017.SHAPING, DEBINDING AND SINTERING OF STEEL COMPONENTS VIA FUSED FILAMENT FABRICATION
Gonzalez-Gutierrez, J., Godec, D., Kukla, C., Schlauf, T., Burkhardt, C. & Holzer, C., 8 Juni 2017, 16th International Scientific Conference on Production Engineering. Udiljak, T. (Hrsg.). Zadar, Croatia, S. 99 104 S.Fused Filament Fabrication (FFF) of PIM Feedstocks
Kukla, C., Gonzalez-Gutierrez, J., Cano Cano, S., Hampel, S., Burkhardt, C., Moritz, T. & Holzer, C., 7 Juni 2017, ACTAS DEL VI CONGRESO NACIONAL DE PULVIMETALURGIA Y I CONGRESO IBEROAMERICANO DE PULVIMETALURGIA. Herranz, G., Ferrari, B. & Cabrera, J. M. (Hrsg.). Ciudad Real, Spain, Band 6. S. 1-6 6 S.Fused Filament Fabrication for the production of metal and/or ceramic parts and feedstocks therefore
Kukla, C., Gonzalez-Gutierrez, J., Cano Cano, S., Burkhardt, C., Hampel, S., Moritz, T. & Holzer, C., 29 Mai 2017, 19th Plansee Seminar. Reutte, Austria: Plansee AG, Band 19. 9 S.Fused Filament Fabrication for the Production of Metal and/or Ceramic Parts and Feedstocks Therefore
Kukla, C., Gonzalez-Gutierrez, J., Cano Cano, S., Burkhardt, C., Hampel, S., Moritz, T. & Holzer, C., 29 Mai 2017. 1 S.FILLER CONTENT AND PROPERTIES OF HIGHLY FILLED FILAMENTS FOR FUSED FILAMENT FABRICATION OF MAGNETS
Gonzalez-Gutierrez, J., Duretek, I., Arbeiter, F., Kukla, C. & Holzer, C., 9 Mai 2017, ANTEC® 2017. Anaheim, California, USA, 4 S.MOLECULAR DYNAMICS SIMULATIONS AS A TOOL FOR MATERIAL SELECTION IN METAL INJECTION MOULDING FEEDSTOCKS
Gooneie, A., Gonzalez-Gutierrez, J., Kukla, C. & Holzer, C., 24 Apr. 2017, CONFERENCE PROCEEDINGS ICIT&APT 2017 10th International Conference on Industrial Tools and Advanced Processing Technologies. Hancic, A. & Grum, J. (Hrsg.). Ljubljana, Slovenia, Band 10. 1 S.The SDS process: A viable way for the production of metal parts
Kukla, C., Gonzalez-Gutierrez, J., Hampel, S., Burkhardt, C. & Holzer, C., 24 Apr. 2017, CONFERENCE PROCEEDINGS ICIT&APT 2017 10th International Conference on Industrial Tools and Advanced Processing Technologies. Hancic, A. & Grum, J. (Hrsg.). Band 10. 1 S.Metal Injection Moulding for the Production of Recycled Rare Earth Magnets
Gonzalez-Gutierrez, J., Walton, A., Schlauf, T., Burkhardt, C., Kukla, C., Krispin, M. & Holzer, C., 20 Apr. 2017. 1 S.Rheology of PIM feedstocks
Kukla, C., Duretek, I., Gonzalez-Gutierrez, J. & Holzer, C., 9 Feb. 2017, in: Metal Powder Report. 72, 1, S. 39-44 6 S.New methodology for steady-state friction measurements of granular materials under pressure
Bek, M., Gonzalez-Gutierrez, J. & Emri, I., 1 Jan. 2017, Experimental and Applied Mechanics - Proceedings of the 2016 Annual Conference on Experimental and Applied Mechanics. Zhu, Y. & Zehnder, A. T. (Hrsg.). S. 105-113 9 S. (Conference Proceedings of the Society for Experimental Mechanics Series; Band 4).Effect of Particle Size on the Properties of Highly-Filled Polymers for Fused Filament Fabrication
Kukla, C., Gonzalez-Gutierrez, J., Duretek, I., Schuschnigg, S. & Holzer, C., 2017.Polymer Trends: Fused Filament Fabrication projects at MUL-KV
Gonzalez-Gutierrez, J., 2 Dez. 2016, S. 1-56. 56 S.Atomistic Modelling of Confined Polypropylene Chains between Ferric Oxide Substrates at Melt Temperature
Gooneie, A., Gonzalez-Gutierrez, J. & Holzer, C., 14 Okt. 2016, in: Polymers / Molecular Diversity Preservation International. 8.2016, 10, S. 361-380 19 S.Special Materials and Technologies for Fused Filament Fabrication
Spörk, M., Gonzalez-Gutierrez, J., Schuschnigg, S. & Holzer, C., 11 Okt. 2016, 2016 PPS Asia/Australia Conference. Chengdu, China, S. 1-5 5 S.Metal Injection Moulding of NdFeB Based on Recycled Powders
Imgrund, P., Weber, O., Schlauf, T., Pischang, K., Pickering, L., Walton, A., Gonzalez-Gutierrez, J., Kukla, C. & Burkhardt, C., 9 Okt. 2016, World PM2016 Congress & Exhibition. Petzoldt, F. (Hrsg.). Hamburg, Germany: European Powder Metallurgy Association, S. 1-7 7 S.Properties for PIM Feedstocks Used in Fused Filament Fabrication
Kukla, C., Duretek, I., Schuschnigg, S., Gonzalez-Gutierrez, J. & Holzer, C., 9 Okt. 2016, World PM2016 Congress & Exhibition. Petzoldt, F. (Hrsg.). Hamburg, Germany: European Powder Metallurgy Association, S. 1-5 5 S.Effect of Particle Size on the Properties of Highly-Filled Polymers for Fused Filament Fabrication
Holzer, C., Kukla, C., Duretek, I., Schuschnigg, S. & Gonzalez-Gutierrez, J., 28 Juli 2016.Effect of Particle Size on the Properties of Highly-Filled Polymers for Fused Filament Fabrication
Kukla, C., Duretek, I., Schuschnigg, S., Gonzalez-Gutierrez, J. & Holzer, C., 25 Juli 2016, S. 299. 1 S.Effect of Particle Size on the Properties of Highly-Filled Polymers for Fused Filament Fabrication
Kukla, C., Duretek, I., Schuschnigg, S., Gonzalez-Gutierrez, J. & Holzer, C., 25 Juli 2016, 32nd International Conference of the POLYMER PROCESSING SOCIETY. Maazouz, A. (Hrsg.). Lyon, France, Band 32. 4 S.Models to Predict the Viscosity of Metal Injection Molding Feedstock Materials as Function of Their Formulation
Gonzalez-Gutierrez, J., Duretek, I., Kukla, C., Poljšak, A., Bek, M., Emri, I. & Holzer, C., 28 Mai 2016, in: Metals : open access journal . 6.2016, 6, S. 129-146 17 S., 129.Fused Filament Fabrication for Metallic Parts
Gonzalez-Gutierrez, J., Kukla, C., Schuschnigg, S., Duretek, I. & Holzer, C., 14 Apr. 2016, 25. Leobener Kunststoff-Kolloquium: Kunststoffgerechte Bauteilentwicklung- vom Werkstoff zum Produkt. Pinter, G. & Pilz, G. (Hrsg.). Leoben, Austria, Band 25. S. 187-188 2 S.Fused Filament Fabrication for Metallic Parts
Gonzalez-Gutierrez, J., Kukla, C., Schuschnigg, S., Duretek, I. & Holzer, C., Apr. 2016, S. 1.Apparatus for steady-state friction measurements of granular materials under uniaxial compression
Bek, M., Gonzalez-Gutierrez, J. & Emri, I., 1 Jan. 2016, 33rd Danubia Adria Symposium on Advances in Experimental Mechanics. S. 170-171 2 S. (33rd Danubia Adria Symposium on Advances in Experimental Mechanics).Study of rheological behaviour of stainless steel feedstock taking into account the thermal effects
Kukla, C., Duretek, I., Schuschnigg, S., Gonzalez-Gutierrez, J., Gooneie, A. & Holzer, C., 30 Nov. 2015, IBEREO’15 IBERIAN RHEOLOGY CONFERENCE. Rasteiro, M. G. (Hrsg.). Coimbra, Portugal: Universidad Nacional de Colombia, S. 50-53 4 S.Apparatus for measuring friction inside granular materials— Granular friction analyzer
Bek, M., Gonzalez-Gutierrez, J., Moreno Lopez, J. A., Bregant, D. & Emri, I., 24 Nov. 2015, in: Powder technology : an international journal on the science and technology of wet and dry particulate systems. 288, 2016, S. 255-265 10 S.Viscosity and creep compliance of polyoxymethylene copolymers of various average molecular weights
Gonzalez-Gutierrez, J., Oblak, P., Megen, Z. & Emri, I., Okt. 2015, in: Polimery/Polymers. 2015, 10, S. 620-627 7 S.Rheological Behaviour of Bronze Feedstocks at Low Shear Rates
Kukla, C., Duretek, I., Gonzalez-Gutierrez, J. & Holzer, C., 14 Sept. 2015, Euro PM2015 Congress Proceedings. Reims, France: European Powder Metallurgy Association, 6 S.Processability and mechanical properties of extensively recycled high density polyethylene
Oblak, P., Gonzalez-Gutierrez, J., Zupančič, B., Aulova, A. & Emri, I., 1 Jan. 2015, in: Polymer Degradation and Stability. 114, S. 133-145 13 S.Selection of appropriate polyoxymethylene-based binder for powder injection molding feedstock
Gonzalez-Gutierrez, J., 8 Sept. 2014, in: Zeitschrift Kunststofftechnik : Journal of plastics technology. 10, 5, S. 150 164 S.Strain Dependence of the Uniaxial Compression Response of Vegetable Shortening
Gonzalez-Gutierrez, J. & Scanlon, M. G., 25 Juni 2013, (Elektronische Veröffentlichung vor Drucklegung.) in: The journal of the American Oil Chemists' Society. 90.2013, 9, S. 1319-1326 8 S.The effect of extensive mechanical recycling on the properties of low density polyethylene
Jin, H., Gonzalez-Gutierrez, J., Oblak, P., Zupancic, B. & Emri, I., Nov. 2012, in: Polymer Degradation and Stability. 97, 11, S. 2262-2272IMPORTANCE OF VISCOELASTIC CHARACTERISTICS IN DETERMINING FUNCTIONALITY OF TIME-DEPENDENT MATERIALS
Emri, I., Zupancic, B., Gergesova, M., Saprunov, I., Gonzalez-Gutierrez, J. & Bek, M., Okt. 2012, in: DYNA-COLOMBIA. 79, 175, S. 97-104Powder Injection Molding of Metal and Ceramic Parts
Gonzalez-Gutierrez, J., Stringari, G. & Emri, I., 23 März 2012, Some Critical Issues for Injection Molding. Wang, J. (Hrsg.). 1 Aufl. Rijeka, Croatia, S. 65 - 88 23 S. 3Rheology and mechanical properties of fats
Gonzalez-Gutierrez, J. & Scanlon, M. G., 23 Feb. 2012, Structure-function analysis of edible fats. Marangoni, A. (Hrsg.). 1 Aufl. Urbana, Illinois, USA, S. 127-172 45 S. 5Effect of processing on the viscoelastic, tensile and optical properties of albumen/starch-based bioplastics
Gonzalez-Gutierrez, J., Partal, P., Garcia-Morales, M. & Gallegos, C., 11 Feb. 2011, in: Carbohydrate Polymers. 84, 1, S. 308-315Development of highly-transparent protein/starch-based bioplastics
Gonzalez-Gutierrez, J., Partal, P., Garcia-Morales, M. & Gallegos, C., März 2010, in: Bioresource technology. 101, 6, S. 2007-2013Qualifikationen
Dr.-Studium d.montanist. Wissenschaften , PhD, Time-Dependent Characteristics of Polymer-Metal composites for the Use of Injection Moulding Technology, Universität Laibach
1 Okt. 2010 → 1 Dez. 2014
Datum der Bewilligung: 1 Dez. 2014
Auszeichnungen
Deutscher Rohstoffeffizienz-Preis 2017
Holzer, C. (Empfänger/-in), Schuschnigg, S. (Empfänger/-in), Kukla, C. (Empfänger/-in) & Gonzales-Gutierrez, J. (Empfänger/-in), 10 Jan. 2018
Umwelttechnikpreis Baden-Württemberg
Holzer, C. (Empfänger/-in), Schuschnigg, S. (Empfänger/-in), Gonzales-Gutierrez, J. (Empfänger/-in) & Kukla, C. (Empfänger/-in), 1 Juli 2017
