Abdellah Kharicha
Publikationen
- 2018
- Veröffentlicht
Numerical modeling of the MHD flow in continuous casting mold by two CFD platforms ANSYS Fluent and OpenFOAM
Vakhrushev, A., Wu, M., Kharicha, A. & Ludwig, A., 2018.Publikationen: Konferenzbeitrag › Paper › (peer-reviewed)
- Veröffentlicht
Numerical simulation of fluid flow in the mushy zone under rotation magnetic field: Influence of Permeability
Zhang, H., Wu, M., Zheng, Y., Ludwig, A. & Kharicha, A., 2018.Publikationen: Konferenzbeitrag › Paper › (peer-reviewed)
- 2017
- Elektronische Veröffentlichung vor Drucklegung.
Incorporation of fragmentation into a volume average solidification model
Zheng, Y., Wu, M., Kharicha, A. & Ludwig, A., 5 Dez. 2017, (Elektronische Veröffentlichung vor Drucklegung.) in: Modelling and simulation in materials science and engineering. 26.2018, 1, 18 S., 015004.Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)
- Veröffentlicht
A (non-)hydrostatic free-surface numerical model for two-layer flows
Bohacek, J., Kharicha, A., Ludwig, A., Wu, M., Karimi-Sibaki, E., Paar, A., Brandner, M., Elizondo, L. & Trickl, T., 18 Apr. 2017, in: Applied Mathematics and Computation. 319.2018, 15 February, S. 301-317 17 S.Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)
- Veröffentlicht
Discussion on Modeling Capability for Macrosegregation
Wu, M., Kharicha, A. & Ludwig, A., 15 Apr. 2017, in: High temperature material processes. 36.2017, 5, S. 531-539 9 S.Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)
- Veröffentlicht
Numerical Study of the Buoyancy Effect on Magnetohydrodynamic Three-Dimensional LiPb Flow in a Rectangular Duct
Zahia, T., Faiza, M., Bouabdallah, A., Merah, A. & Kharicha, A., 5 Apr. 2017, in: Journal of Fluids Engineering. 139.2017, 6, S. 061201 9 S.Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)
- Veröffentlicht
Massive Formation of Equiaxed Crystals by Avalanches of Mushy Zone Segments
Ludwig, A., Stefan-Kharicha, M., Kharicha, A. & Wu, M., 16 März 2017, in: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 48.2017, 6, S. 2927-2931 5 S.Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)
- Veröffentlicht
12. Karimi-Sibaki E., Kharicha A., Wu M., Bohacek J., Ludwig A., Steel Res. Int., Vol. 88 (5), 2017, DOI: 10.1002/srin.201770051. “Cover Picture: steel research int. 5/2017”
Karimi Sibaki, E., Wu, M., Ludwig, A., Bohacek, J. & Kharicha, A., 2017Publikationen: Andere Beiträge › Sonstiges › Forschung
- Veröffentlicht
A four phase model for the macrosegregation and shrinkage cavity during solidification of steel ingot
Wu, M., Ludwig, A. & Kharicha, A., 2017, in: Applied Mathematical Modelling. 41.2017, January, S. 102-120 19 S.Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)
- Veröffentlicht
Engineering applications of magnetohydrodynamics
Kharicha, A., 2017Publikationen: Thesis / Studienabschlussarbeiten und Habilitationsschriften › Habilitationsschrift › (peer-reviewed)
- Veröffentlicht
Numerical Study of Crystal Sedimentation Induced Segregation Band in Steel Ingots
Wu, M., Kharicha, A. & Ludwig, A., 2017, S. 503-507. 5 S.Publikationen: Konferenzbeitrag › Vortrag › Forschung › (peer-reviewed)
- Veröffentlicht
Numerical Study of Crystal Sedimentation Induced Segregation Band in Steel Ingots
Wu, M., Kharicha, A. & Ludwig, A., 2017, SP17.Publikationen: Beitrag in Buch/Bericht/Konferenzband › Beitrag in Konferenzband
- Veröffentlicht
Role of fragmentation in as-cast structure: numerical study and experimental validation
Zheng, Y., Wu, M., Kharicha, A. & Ludwig, A., 2017, in: China Foundry. 14.2017, 5, S. 321-326 6 S.Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)
- Veröffentlicht
Toward Modeling of Electrochemical Reactions during Electroslag Remelting (ESR) Process
Karimi Sibaki, E., Kharicha, A., Wu, M., Ludwig, A. & Bohacek, J., 2017, in: Steel research international. 88.2017, 5, 8 S., 170001.Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)
- Veröffentlicht
Volume Average Modelling of Equiaxed-to-Columnar Transition in a Vertically Solidified Pb-18 wt.%Sn Cavity
Zheng, Y., Wu, M., Kharicha, A. & Ludwig, A., 2017, S. 312-16. 6 S.Publikationen: Konferenzbeitrag › Vortrag › Forschung › (peer-reviewed)
- Veröffentlicht
Volume Average Modelling of Equiaxed-to-Columnar Transition in a Vertically Solidified Pb-18 wt.%Sn Cavity
Zheng, Y., Wu, M., Kharicha, A. & Ludwig, A., 2017, SP17.Publikationen: Beitrag in Buch/Bericht/Konferenzband › Beitrag in Konferenzband
- 2016
- Veröffentlicht
An attempt to model electrode change during the ESR process
Karimi-Sibaki, E., Kharicha, A., Wu, M., Ludwig, A., Holzgruber, H., Ofner, B., Scheriau, A., Kubin, M. & Ramprecht, M., 10 Aug. 2016, in: IOP Conference Series: Materials Science and Engineering. 143, 1, 012006.Publikationen: Beitrag in Fachzeitschrift › Konferenzartikel › (peer-reviewed)
- Veröffentlicht
A numerical study on electrochemical transport of ions in calcium fluoride slag
Karimi-Sibaki, E., Kharicha, A., Wu, M. & Ludwig, A., 10 Aug. 2016, in: IOP Conference Series: Materials Science and Engineering. 143, 1, 012008.Publikationen: Beitrag in Fachzeitschrift › Konferenzartikel › (peer-reviewed)
- Veröffentlicht
Assessment of different turbulence models for the motion of non-metallic inclusion in induction crucible furnace
Barati, H., Wu, M., Kharicha, A. & Ludwig, A., 10 Aug. 2016, in: IOP Conference Series: Materials Science and Engineering. 143, 1, 012026.Publikationen: Beitrag in Fachzeitschrift › Konferenzartikel › (peer-reviewed)
- Veröffentlicht
Simulation of macrosegregation in a large vertical continuous casting of steel
Zheng, Y., Wu, M., Kharicha, A. & Ludwig, A., 10 Aug. 2016, in: IOP Conference Series: Materials Science and Engineering. 143, 1, 012032.Publikationen: Beitrag in Fachzeitschrift › Konferenzartikel › (peer-reviewed)
- Veröffentlicht
Transient melting of an ESR electrode
Kharicha, A., Karimi-Sibaki, E., Bohacek, J., Wu, M. & Ludwig, A., 10 Aug. 2016, in: IOP Conference Series: Materials Science and Engineering. 143, 1, 012003.Publikationen: Beitrag in Fachzeitschrift › Konferenzartikel › (peer-reviewed)
- Veröffentlicht
Simulation in Metallurgical Processing: Recent Developments and Future Perspectives
Ludwig, A., Wu, M. & Kharicha, A., 27 Juni 2016, in: JOM. 68.2016, 8, S. 2191-2197 7 S.Publikationen: Beitrag in Fachzeitschrift › Übersichtsartikel › (peer-reviewed)
- Veröffentlicht
On Validity of Axisymmetric Assumption for Modeling an Industrial Scale Electroslag Remelting Process
Karimi Sibaki, E., Kharicha, A., Bohacek, J., Wu, M. & Ludwig, A., 1 Feb. 2016, in: Advanced engineering materials. 18.2016, 2, S. 224-230 7 S.Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)
- Veröffentlicht
Simulation of the Electric Signal During the Formation and Departure of Droplets in the Electroslag Remelting Process
Kharicha, A., Wu, M., Ludwig, A. & Karimi Sibaki, E., 25 Jan. 2016, in: Metallurgical and materials transactions. B, Process metallurgy and materials processing science. 47.2016, 2, S. 1427-1434 8 S.Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)
- Veröffentlicht
On the importance of modeling 3D shrinkage cavities for the prediction of macrosegregation in steel ingots
Ludwig, A., Wu, M. & Kharicha, A., 1 Jan. 2016, S. 3-10. 8 S.Publikationen: Konferenzbeitrag › Paper › (peer-reviewed)
- Veröffentlicht
Free-surface flow in horizontally rotating cylinder: experiment and simulation
Bohacek, J., Kharicha, A., Ludwig, A., Wu, M., Paar, A., Brandner, M., Elizondo, L. & Trickl, T., 2016, in: IOP Conference Series: Materials Science and Engineering. S. 1-7Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)
- Veröffentlicht
Influence of forced convection on solidification and remelting in the developing mushy zone
Wu, M., Vakhrushev, A., Ludwig, A. & Kharicha, A., 2016, in: IOP Conference Series: Materials Science and Engineering.Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)
- Veröffentlicht
Numerical analysis of macrosegregation in vertically solidified Pb-Sn test castings - Part I: Columnar solidification
Wu, M., Zeng, Y., Kharicha, A. & Ludwig, A., 2016, in: Computational materials science.Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)
- Veröffentlicht
Numerical analysis of macrosegregation in vertically solidified Pb-Sn test castings – Part II : Equiaxed solidification
Zheng, Y., Wu, M., Kharicha, A. & Ludwig, A., 2016, in: Computational materials science.Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)
- Veröffentlicht
Numerical analysis of solidification and macrosegregation in a semi-continuously cast steel strand
Zheng, Y. (Mit-Herausgeber), Wu, M., Kharicha, A. (Mit-Herausgeber) & Ludwig, A. (Mit-Herausgeber), 2016.Publikationen: Konferenzbeitrag › Poster › Forschung › (peer-reviewed)
- Veröffentlicht
Simulation of the Electrical Signal During the Formation and Departure of Droplets in the Electro Slag Remelting Process
Kharicha, A., Wu, M., Ludwig, A. & Karimi Sibaki, E., 2016, in: Metallurgical and materials transactions. B, Process metallurgy and materials processing science.Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)
- Veröffentlicht
Simulation of thermos-solutal convection induced macrosegregation in a Sn-10% Pb alloy benchmark during columnar solidification
Zheng, Y., Wu, M., Kharicha, A. & Ludwig, A., 2016, in: IOP Conference Series: Materials Science and Engineering.Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)
- Veröffentlicht
Simulation of Turbulent Melt Flow and Deposition of Non-metallic Inclusions on Nozzle Wall of a Clogging Simulator
Barati, H. (Mit-Herausgeber), Wu, M., Kharicha, A. (Mit-Herausgeber) & Ludwig, A. (Mit-Herausgeber), 2016.Publikationen: Konferenzbeitrag › Paper › (peer-reviewed)
- 2015
- Veröffentlicht
On Macrosegregation
Ludwig, A., Wu, M. & Kharicha, A., 1 Nov. 2015, in: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 46, 11, S. 4854-4867 14 S.Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)
- Veröffentlicht
Simulation of Crystal Sedimentation and Viscoplastic Behavior of Sedimented Equiaxed Mushy Zones
Ludwig, A., Vakhrushev, A., Wu, M., Holzmann, T. & Kharicha, A., 25 Sept. 2015, in: Transactions of the Indian Institute of Metals. 68, 6, S. 1087-1094 8 S.Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)
- Elektronische Veröffentlichung vor Drucklegung.
A Dynamic Mesh-Based Approach to Model Melting and Shape of an ESR Electrode
Karimi-Sibaki, E., Kharicha, A., Bohacek, J., Wu, M. & Ludwig, A., 11 Juni 2015, (Elektronische Veröffentlichung vor Drucklegung.) in: Metallurgical and materials transactions. B, Process metallurgy and materials processing science. 46.2015, 5, S. 2049-2061 13 S.Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)
- Elektronische Veröffentlichung vor Drucklegung.
An approximate Riemann solver for shallow water equations and heat advection in horizontal centrifugal casting
Bohacek, J., Kharicha, A., Ludwig, A. & Wu, M., 30 Apr. 2015, (Elektronische Veröffentlichung vor Drucklegung.) in: Journal of computational and applied mathematics. 267.2015, 15 September, S. 179-194 16 S.Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)
- Veröffentlicht
Experimental and numerical analysis of free surface deformation in an electrically driven flow
Kharicha, A., Teplyakov, I., Ivochkin, Y., Wu, M., Ludwig, A. & Guseva, A., 1 Apr. 2015, in: Experimental Thermal and Fluid Science. 62, S. 192-201 10 S.Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)
- Veröffentlicht
An approximate Riemann solver for two layer shallow water equations in horizontal centrifugal casting
Bohacek, J., Kharicha, A., Ludwig, A., Wu, M., Paar, A., Brandner, M., Elizondo, L. & Trickl, T., 2015, 6th. Int. Conf. "SteelSim 2015", Bordolino, Italy, on data storage device.Publikationen: Beitrag in Buch/Bericht/Konferenzband › Beitrag in Konferenzband
- Veröffentlicht
An attempt to model electrode change during the ESR process
Karimi Sibaki, E., Kharicha, A., Wu, M., Ludwig, A., Holzgruber, H., Ofner, B., Scheriau, A., Kubin, M. & Ramprecht, M., 2015, Int. Symp. on Liquid Metal Processing and Casting (LMPC-15).Publikationen: Beitrag in Buch/Bericht/Konferenzband › Beitrag in Konferenzband
- Veröffentlicht
An attempt to model shrinkage cavity coupled with macrosegregation in steel ingots
Wu, M., Ludwig, A. & Kharicha, A., 2015, 6th. Int. Conf. "SteelSim 2015", Bordolino, Italy, on data storage device.Publikationen: Beitrag in Buch/Bericht/Konferenzband › Beitrag in Konferenzband
- Veröffentlicht
A numerical study on electrochemical transport of ions in calcium fluoride slag
Karimi Sibaki, E., Kharicha, A., Wu, M. & Ludwig, A., 2015, Int. Symp. on Liquid Metal Processing and Casting (LMPC-15).Publikationen: Beitrag in Buch/Bericht/Konferenzband › Beitrag in Konferenzband
- Veröffentlicht
A scale adaptive dendritic envelope model of solidification at mesoscopic scales
Kharicha, A., Stefan-Kharicha, M., Ludwig, A. & Wu, M., 2015, in: IOP Conference Series: Materials Science and Engineering. 84.2015, 9 S., 012032.Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)
- Veröffentlicht
A shallow layer model predicting the zinc film thickness during thecontinuous hot-dip galvanizing process
Kharicha, A., Pfeiler, C., Bohacek, J., Ludwig, A., Wu, M., Mogeritsch, J., Angelini, G. & Riener, C. K., 2015.Publikationen: Konferenzbeitrag › Paper › (peer-reviewed)
- Veröffentlicht
Assessment of Different Turbulence Models for the Motion of Non-metallic Inclusion in Induction Crucible Furnace
Barati, H., Wu, M., Ludwig, A. & Kharicha, A., 2015, Int. Symp. on Liquid Metal Processing and Casting (LMPC-15).Publikationen: Beitrag in Buch/Bericht/Konferenzband › Beitrag in Konferenzband
- Veröffentlicht
Experimental and numerical analysis of free surface deformationin an electrically driven flow
Kharicha, A., Teplyakov, I., Y., I., Wu, M., Ludwig, A. & Guseva, A., 2015, in: Experimental Thermal and Fluid Science. 62, S. 192-201Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)
- Veröffentlicht
Modelling As-Cast Structure and Macrosegregation in Ingot Casting
Wu, M., Kharicha, A. & Ludwig, A., 2015, in: Materials China. 34, S. 640-651Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)
- Veröffentlicht
Modified shallow water equations with application for horizontal centrifugal casting of rolls
Kharicha, A., Bohacek, J., Ludwig, A. & Wu, M., 2015, in: Journal of Fluids Engineering.Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)
- Veröffentlicht
Recent Developments and Future Perspectives in Simulation of Metallurgical Processes
Ludwig, A., Wu, M. & Kharicha, A., 2015, in: Berg- und hüttenmännische Monatshefte : BHM.Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung
- Veröffentlicht
Simulation of macrosegregation in a large vertical continuous casting of steel
Zheng, Y., Wu, M., Kharicha, A. & Ludwig, A., 2015, Int. Symp. on Liquid Metal Processing and Casting (LMPC-15).Publikationen: Beitrag in Buch/Bericht/Konferenzband › Beitrag in Konferenzband