Lehrstuhl für Allgemeinen Maschinenbau (140)

Organisation: Lehrstuhl

Publikationen

  1. 2021
  2. Veröffentlicht

    Eigenspannungsstabilität von Ti-6Al-4V Strukturkomponenten

    Stanojevic, A., 2021

    Publikationen: Thesis / Studienabschlussarbeiten und HabilitationsschriftenDissertation

  3. Veröffentlicht

    Entwicklung eines Prüfkonzeptes für die hochfrequente Ermüdungsprüfung von kleinen, bauteilähnlichen Proben

    Klösch, R., 2021

    Publikationen: Thesis / Studienabschlussarbeiten und HabilitationsschriftenMasterarbeit

  4. Veröffentlicht

    Fatigue strength assessment of additively manufactured 17-4PH structures considering surface layer effects and residual stresses

    Entfellner, P., 2021

    Publikationen: Thesis / Studienabschlussarbeiten und HabilitationsschriftenMasterarbeit

  5. Veröffentlicht

    Fatigue strength assessment of additively manufactured metallic structures based on a macroscale approach

    Schneller, W., 2021

    Publikationen: Thesis / Studienabschlussarbeiten und HabilitationsschriftenDissertation

  6. Veröffentlicht

    FEM Analysis of Fatigue Crack Growth in Low Carbon Steel Using Single Edge Notched Tension Specimen

    Busari, Y. O., Manurung, Y. H. P., Shuaib-Babata, Y. L., Leitner, M. & Celik, E., 2021, Recent Trends in Manufacturing and Materials Towards Industry 4.0 - Selected Articles from iM3F 2020, Malaysia. Osman Zahid, M. N., Abdul Sani, A. S., Mohamad Yasin, M. R., Ismail, Z., Che Lah, N. A. & Mohd Turan, F. (Hrsg.). S. 645-655 11 S. (Lecture Notes in Mechanical Engineering; Band 46).

    Publikationen: Beitrag in Buch/Bericht/KonferenzbandBeitrag in Konferenzband

  7. Veröffentlicht

    Grain Growth Prediction of SS316L Stainless Steel of Bead-On-Plate Using Numerical Computation

    Mat, M. F., Manurung, Y. H. P. M., Muhammad, N., Ahmad, S. N., Adenan, M. S. & Leitner, M., 2021, Recent Trends in Manufacturing and Materials Towards Industry 4.0 - Selected Articles from iM3F 2020, Malaysia. Osman Zahid, M. N., Abdul Sani, A. S., Mohamad Yasin, M. R., Ismail, Z., Che Lah, N. A. & Mohd Turan, F. (Hrsg.). S. 1-11 11 S. (Lecture Notes in Mechanical Engineering; Band 46).

    Publikationen: Beitrag in Buch/Bericht/KonferenzbandBeitrag in Konferenzband

  8. Veröffentlicht

    Grid Load Mitigation in EV Fast Charging Stations Through Integration of a High-Performance Flywheel Energy Storage System with CFRP Rotor

    Buchroithner, A., Presmair, R., Haidl, P., Wegleiter, H., Thormann, B., Kienberger, T., Auer, P. & Domitner, J., 2021, 2021 IEEE Green Energy and Smart Systems Conference, IGESSC 2021. Institute of Electrical and Electronics Engineers, (2021 IEEE Green Energy and Smart Systems Conference, IGESSC 2021).

    Publikationen: Beitrag in Buch/Bericht/KonferenzbandBeitrag in Konferenzband

  9. Veröffentlicht

    Implementierung des lokalen Rissschließverhaltens in die numerische Rissfortschrittssimulation

    Gaugelhofer, A. J., 2021

    Publikationen: Thesis / Studienabschlussarbeiten und HabilitationsschriftenMasterarbeit

  10. Veröffentlicht

    Influence of the Cemented Carbides Composition on the Disintegration in Liquid Zinc

    Ebner, T., Luidold, S., Czettl, C. & Storf, C., 2021, Ni-Co 2021: The 5th International Symposium on Nickel and Cobalt. Anderson, C., Goodall, G., Gostu, S., Gregurek, D., Lundström, M., Meskers, C., Nicol, S., Peuraniemi, E., Tesfaye, F., Tripathy, P. K., Wang, S. & Zhang, Y. (Hrsg.). S. 329-343 15 S. (Minerals, Metals and Materials Series).

    Publikationen: Beitrag in Buch/Bericht/KonferenzbandBeitrag in Konferenzband

  11. Veröffentlicht

    In-plant observations and thermomechanical modeling of different vessel types applying an insulation layer

    Rebouillat, L. & Jin, S., 2021, AISTech 2021 - Proceedings of the Iron and Steel Technology Conference. Association for Iron and Steel Technology, AISTECH, S. 1667-1673 7 S. (AISTech - Iron and Steel Technology Conference Proceedings; Band 2021-June).

    Publikationen: Beitrag in Buch/Bericht/KonferenzbandBeitrag in Konferenzband

  12. Veröffentlicht

    Investigation of Material Property Model on Substrate Deformation Induced by Thick-Walled WAAM Process Using Numerical Computation

    Ahmad, S. N., Manurung, Y. H. P., Mat, M. F. & Leitner, M., 2021, Recent Trends in Manufacturing and Materials Towards Industry 4.0 - Selected Articles from iM3F 2020, Malaysia. Osman Zahid, M. N., Abdul Sani, A. S., Mohamad Yasin, M. R., Ismail, Z., Che Lah, N. A. & Mohd Turan, F. (Hrsg.). S. 747-761 15 S. (Lecture Notes in Mechanical Engineering; Band 46).

    Publikationen: Beitrag in Buch/Bericht/KonferenzbandBeitrag in Konferenzband

  13. Veröffentlicht

    Mechanische und thermische Simulation eines Formel 1 Einzylinder-Prüfstandsmotors bei extrem hohen Spitzendrücken

    Kübler, P., 2021

    Publikationen: Thesis / Studienabschlussarbeiten und HabilitationsschriftenMasterarbeit

  14. Veröffentlicht

    Microstructural characterization of neutron irradiated mineral concrete aggregates

    Arregui-Mena, J. D., Weber, J., Tunes, M. A., Torrence, C. E., Rosseel, T. M., Maruyama, I. & Edmondson, P. D., 2021, in: Transactions of the American Nuclear Society. 124, 1, S. 312-313 2 S.

    Publikationen: Beitrag in FachzeitschriftKonferenzartikel(peer-reviewed)

  15. Veröffentlicht

    Modelling the durability of sliding contacts

    Pusterhofer, M., 2021

    Publikationen: Thesis / Studienabschlussarbeiten und HabilitationsschriftenDissertation

  16. Veröffentlicht

    Modelscale methodology for the tribological characterization of novel highly stressed journal bearing systems

    Renhart, P., 2021

    Publikationen: Thesis / Studienabschlussarbeiten und HabilitationsschriftenDissertation

  17. Veröffentlicht

    Neue Verfahren zur Betriebsfestigkeitsbewertung von randschichtgehärteten Bauteilen

    Dobberke, D., 2021

    Publikationen: Thesis / Studienabschlussarbeiten und HabilitationsschriftenDissertation

  18. Veröffentlicht

    Numerical Simulation on Residual Stress and Substrate Deformation of Bead-On-Plate of SS316L Using Inherent Strain Method

    Ahmad, S. N., Manurung, Y. H. P., Taufek, T. & Leitner, M., 2021, Recent Trends in Manufacturing and Materials Towards Industry 4.0 - Selected Articles from iM3F 2020, Malaysia. Osman Zahid, M. N., Abdul Sani, A. S., Mohamad Yasin, M. R., Ismail, Z., Che Lah, N. A. & Mohd Turan, F. (Hrsg.). S. 723-738 16 S. (Lecture Notes in Mechanical Engineering; Band 46).

    Publikationen: Beitrag in Buch/Bericht/KonferenzbandBeitrag in Konferenzband

  19. Veröffentlicht

    Numerische Analysen zur Schweißpfadplanung komplexer WAAM-Strukturen

    Prüller, S., 2021

    Publikationen: Thesis / Studienabschlussarbeiten und HabilitationsschriftenMasterarbeit

  20. Veröffentlicht

    On an experimental-computational approach for localised durability assessment of sliding contacts

    Pusterhofer, M. & Grün, F., 2021, in: Wear. 486-487.2021, 15 December, 18 S., 204068.

    Publikationen: Beitrag in FachzeitschriftArtikelForschung(peer-reviewed)

  21. Veröffentlicht

    Synthesis, Properties and Performance of selected hard and wear resistant Coatings for Metal Cutting Applications

    Friedrich, B. E., 2021

    Publikationen: Thesis / Studienabschlussarbeiten und HabilitationsschriftenMasterarbeit