Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 1073-5623
Fachzeitschrift: Zeitschrift
| ISSNs | 1073-5623 |
|---|
Publikationen
- 2013
- Veröffentlicht
Prediction of the as-cast structure of Al-4.0 Wt Pct Cu ingots
Ahmadein, M., Wu, M., Li, J. H., Schumacher, P. & Ludwig, A., 1 Juni 2013, in: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 44, 6, S. 2895-2903 9 S.Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)
- Veröffentlicht
Application of microprobe analysis to the reconstruction and characterization of dendritic structures
Domitner, J., Kharicha, A., Wu, M. & Ludwig, A., 2013, in: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 44, S. 607-616Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)
- Veröffentlicht
Identification of Defect Prone Peritectic Steel Grades by Analyzing High-Temperature Phase Transformations
Presoly, P., Bernhard, C. & Pierer, R., 2013, in: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 44, S. 5377-5388Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)
- Veröffentlicht
Modeling the effect of strand surface bulging and mechanical softreduction on the macrosegregation formation in steel continuous casting
Domitner, J., Wu, M., Kharicha, A., Ludwig, A., Kaufmann, B., Reiter, J. & Schaden, T., 2013, in: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science.Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)
- Veröffentlicht
Refinement of Eutectic Si Phase in Al-5Si Alloys with Yb Additions
Li, J., SUETSUGU, S., TSUNEKAWA, Y. & Schumacher, P., 2013, in: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 44, S. 669-681Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)
- Veröffentlicht
“Simultaneous observation of melt flow and motion of equiaxed crystals during solidification using a dual phase Particle Image Velocimetry technique. Part I
Kharicha, A., Stefan Kharicha, M., Ludwig, A. & Wu, M., 2013, in: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 44, S. 650-660Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)
- Veröffentlicht
“Simultaneous observation of melt flow and motion of equiaxed crystals during solidification using a dual phase Particle Image Velocimetry technique. Part II
Kharicha, A., Stefan Kharicha, M., Ludwig, A. & Wu, M., 2013, in: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 44, S. 661-668Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)
- 2012
- Veröffentlicht
Retained austenite decomposition and carbide formation during tempering a hot-work tool steel X38CrMoV5-1 studied by dilatometry and atom probe tomography
Lerchbacher, C., Zinner, S. & Leitner, H., 2012, in: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 43, S. 4989-4998Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)
- Veröffentlicht
Static recrystallization of molybdenum after deformation below 0.5TM(K)
Primig, S., Leitner, H., Knabl, W., Lorich, A. & Stickler, R., 2012, in: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 43, S. 4806-4818Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)
- Veröffentlicht
Textural evolution during dynamic recovery and static recrystallization of molybdenum
Primig, S., Leitner, H., Knabl, W., Lorich, A., Clemens, H. & Stickler, R., 2012, in: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 43, S. 4794-4805Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)
