Phase formation, microstructure and deformation behavior of heavily alloyed TiNb- and TiV-based titanium alloys

Okulov, I. V., Bönisch, M., Okulov, A. V., Volegov, A. S., Attar, H., Ehtemam-Haghighi, S., Calin, M., Wang, Z., Hohenwarter, A., Kaban, I., Prashanth, K. G. & Eckert, J., 22 Aug. 2018, in: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 733.2018, 22 August, S. 80-86 7 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

In-situ observations of the fracture and adhesion of Cu/Nb multilayers on polyimide substrates

Cordill, M., Kleinbichler, A., Völker, B., Kraker, P., Economy, D. R., Többens, D. M., Kirchlechner, C. & Kennedy, M. S., 14 Aug. 2018, (Elektronische Veröffentlichung vor Drucklegung.) in: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 735.2018, 26 September, S. 456-462 7 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Cooperative deformation behavior between the shear band and boundary sliding of an Al-based nanostructure-dendrite composite

Kim, J. T., Hong, S. H., Kim, Y. S., Park, H. J., Maity, T., Chawake, N., Bian, X. L., Sarac, B., Park, J. M., Prashanth, K. G., Park, J. Y., Eckert, J. & Kim, K. B., 11 Aug. 2018, in: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 735.2018, 26 September, S. 81-88 8 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Microstructure and mechanical properties of a low C steel subjected to bainitic of quenching and partitioning heat treatments

Ebner, S., Suppan, H., Schnitzer, R. & Hofer, C., 10 Aug. 2018, (Elektronische Veröffentlichung vor Drucklegung.) in: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 735.2018, 26 September, 9 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Microstructure and strength of nano-/ultrafine-grained carbon nanotube-reinforced titanium composites processed by high-pressure torsion

Li, F. X., Hao, P. D., Yi, J. H., Chen, Z., Prashanth, K. G., Maity, T. & Eckert, J., 11 Apr. 2018, in: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 722.2018, 11 April, S. 122-128 7 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Microstructure and mechanical properties of foundry Al-Si-Cu-Hf alloy

Xing, Y., Jia, Z., LI, J., Ding, L., Huang, H. & Liu, Q., 7 März 2018, (Elektronische Veröffentlichung vor Drucklegung.) in: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 722.2018, 11 April, S. 197-205 9 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Experimental and numerical investigations of the γ″ and γ′ precipitation kinetics in Alloy 718

Drexler, A. K., Oberwinkler, B., Primig, S., Turk, C., Povoden-Karadeniz, E., Heinemann, A., Ecker, W. & Stockinger, M., 6 März 2018, (Elektronische Veröffentlichung vor Drucklegung.) in: Materials Science and Engineering A. 723.2018, 18 April, S. 314-323 10 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Microstructure and mechanical properties of a heat-treatable Al-3.5Cu-1.5Mg-1Si alloy produced by selective laser melting

Wang, P., Gammer, C., Brenne, F., Prashanth, K. G., Mendes, R. G., Rümmeli, M. H., Gemming, T., Eckert, J. & Scudino, S., 10 Jan. 2018, in: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 711.2018, January, S. 562-570 9 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Enhanced mechanical properties of Al₂O₃-C refractories with silicon hybridized expanded graphite

Wang, Q., Li, Y., Jin, S., Sang, S., Xu, Y., Xu, X. & Wang, G., 2 Jan. 2018, in: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 709, S. 160-171 12 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Precipitate strengthening and thermal stability in three component metallic nanolaminate thin films

Schoeppner, R., Taylor, A. A., Cordill, M., Zbib, H. M., Michler, J. & Bahr, D. F., 2018, in: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 712.2018, 17 January, S. 485-492 8 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Corrigendum to “Structural modifications in sub-Tg annealed CuZr-based metallic glass”

Sarac, B., Bernasconi, A., Wright, J., Stoica, M., Spieckermann, F., Mühlbacher, M., Keckes, J., Bian, X. L., Wang, G. & Eckert, J., 6 Dez. 2017, (Elektronische Veröffentlichung vor Drucklegung.) in: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 712.2018, 17 January, S. 819 1 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Influence of severe plastic deformation and specimen orientation on the fatigue crack propagation behavior of a pearlitic steel

Leitner, T., Trummer, G., Pippan, R. & Hohenwarter, A., 13 Okt. 2017, (Elektronische Veröffentlichung vor Drucklegung.) in: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 710.2018, 5 January, S. 260-270 11 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

The effect of residual stresses and strain reversal on the fracture toughness of TiAl alloys

Appel, F., Paul, J., Staron, P., Oehring, M., Kolednik, O., Predan, J. & Fischer, F.-D., 7 Okt. 2017, in: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 709.2018, 2 January, S. 17-29 13 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Structural modifications in sub-T_g annealed CuZr-based metallic glass

Sarac, B., Bernasconi, A., Wright, J., Stoica, M., Spieckermann, F., Mühlbacher, M., Keckes, J., Bian, X., Wang, G. & Eckert, J., 14 Sept. 2017, (Elektronische Veröffentlichung vor Drucklegung.) in: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 707.2017, 7 November, S. 245-252 8 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Microporosity and statistical size effect on the fatigue strength of cast aluminium alloys EN AC-45500 and 46200

Leitner, M., Garb, C., Remes, H. & Stoschka, M., 8 Sept. 2017, (Elektronische Veröffentlichung vor Drucklegung.) in: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 707.2017, 7 November, S. 567-575 9 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Impact of severe plastic deformation on microstructure and fracture toughness evolution of a duplex-steel

Schwarz, K. T., Kormout, K., Pippan, R. & Hohenwarter, A., 4 Aug. 2017, in: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 703.2017, 4 August, S. 173-179 7 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Friction welding of selective laser melted Ti6Al4V parts

Prashanth, K. G., Damodaram, R., Maity, T., Wang, P. & Eckert, J., 3 Aug. 2017, (Elektronische Veröffentlichung vor Drucklegung.) in: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 704.2017, September, S. 66-71 6 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Internal friction and atomic relaxation processes in an intermetallic Mo-rich Ti-44Al-7Mo (γ+βo) model alloy

Usategui, L., No, M. L., Mayer, S., Clemens, H. & Juan, J. S., 9 Juni 2017, (Elektronische Veröffentlichung vor Drucklegung.) in: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 700.2017, 17 July, S. 495-502 8 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Compressed Bi-crystal micropillars showing a sigmoidal deformation state – A computational study

Toth, F., Kirchlechner, C., Fischer, F.-D., Dehm, G. & Rammerstorfer, F. G., 26 Mai 2017, (Elektronische Veröffentlichung vor Drucklegung.) in: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 700.2017, 17 July, S. 168-174 7 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Reduced brittleness of multi-walled carbon nanotubes (MWCNTs) containing Al₂O₃-C refractories with boron carbide

Liao, N., Li, Y., Jin, S., Sang, S. & Liu, G., 12 Mai 2017, (Elektronische Veröffentlichung vor Drucklegung.) in: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 698.2017, 20 June, S. 80-87 8 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Nanoindentation and wear properties of Ti and Ti-TiB composite materials produced by selective laser melting

Attar, H., Ehtemam-Haghighi, S., Kent, D., Okulov, I. V., Wendrock, H., Bönisch, M., Volegov, A. S., Calin, M., Eckert, J. & Dargusch, M. S., März 2017, in: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 688, S. 20-26 7 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

The influence of microstructure on the cyclic deformation and damage of copper and an oxide dispersion strengthened steel studied via in-situ micro-beam bending

Howard, C. B., Fritz, R., Alfreider, M., Kiener, D. & Hosemann, P. M., 22 Jan. 2017, (Elektronische Veröffentlichung vor Drucklegung.) in: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 687.2017, 27 February, S. 313-322 10 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Micro-to-nano-scale deformation mechanism of a Ti-based dendritic-ultrafine eutectic alloy exhibiting large tensile ductility

Okulov, I. V., Bönisch, M., Volegov, A. S., Shahabi, H. S., Wendrock, H., Gemming, T. & Eckert, J., 13 Jan. 2017, in: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 682.2017, 13 January, S. 673-678 6 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Creep properties and creep microstructure evolution of Mg-2.49Nd-1.82Gd-0.19Zn-0.4Zr alloy

Han, W., Yang, G., Xiao, L., LI, J. & Jie, W., 2017, in: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 684.2017, 27 January, S. 90-100 11 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Effect of reverted austenite on tensile and impact strength in a martensitic stainless steel: An in-situ X-ray diffraction study

Wießner, M., Gamsjäger, E., van der Zwaag, S. & Angerer, P., 12 Nov. 2016, (Elektronische Veröffentlichung vor Drucklegung.) in: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 682.2017, 13 January, S. 117-125 9 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Effect of cerium addition on microstructure and mechanical properties of high-strength Fe85Cr4Mo8V2C1 cast steel

Hufenbach, J., Helth, A., Lee, M. H., Wendrock, H., Giebeler, L., Choe, C. Y., Kim, K. H., Kühn, U., Kim, T. S. & Eckert, J., 30 Sept. 2016, in: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 674.2016, 30 September, S. 366-374 9 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Interplay between sample size and grain size: Single crystalline vs. ultrafine-grained chromium micropillars

Fritz, R., Maier-Kiener, V., Lutz, D. & Kiener, D., 30 Sept. 2016, in: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 674.2016, 30 September, S. 626-633 8 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Influence of Ag and Co additions on glass-forming ability, thermal and mechanical properties of Cu–Zr–Al bulk metallic glasses

Escher, B., Kühn, U., Eckert, J., Rentenberger, C. & Pauly, S., 15 Sept. 2016, in: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 673.2016, 15 September, S. 90-98 9 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Laser surface remelting of a Cu-Al-Ni-Mn shape memory alloy

da Silva, M. R., Gargarella, P., Gustmann, T., Botta Filho, W. J., Kiminami, C. S., Eckert, J., Pauly, S. & Bolfarini, C., 20 Apr. 2016, in: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 661.2016, 20 April, S. 61-67 7 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Comparison of intergranular strain formation of conventional and newly developed nickel based superalloys

Wagner, J., Hofmann, M., Van Petegem, S., Krempaszky, C., Hoelzel, M. & Stockinger, M., 15 März 2016, (Elektronische Veröffentlichung vor Drucklegung.) in: Materials Science and Engineering A. 662.2016, 26 April, S. 303-307 5 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Deformation and fracture characteristics of ultrafine-grained vanadium

Hohenwarter, A. & Wurster, S., 2016, in: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 650, S. 492-496 5 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Impact of the B2 ordering behavior on the mechanical properties of a Fe Co Mo alloy

Turk, C., Leitner, H., Kellezi, G., Clemens, H., Gan, W., Staron, P. & Primig, S., 2016, in: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 662, S. 511-518 8 S., 662.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Microstructure Evolution and Mechanical Properties of directionally solidified Mg-xGd (x¼0.8, 1.5,and2.5)alloys

Luo, S., Yang, G., Liu, S., Wang, J., Li, J. & Jie, W., 2016, in: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 662, S. 241-250 10 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Morphology change of retained austenite during austempering of carbide-freebainiticsteel

Hofer, C., Winkelhofer, F., Clemens, H. & Primig, S., 2016, in: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 664, S. 236-246 11 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Relationship between mechanical damage and electrical degradation in polymer supported metal films subjected to cyclic loading

Glushko, O., Klug, A., List-Kratochvil, E. J. W. & Cordill, M., 2016, in: Materials science and engineering: A, Structural materials: properties, microstructure and processing.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Designed heterogeneities improve the fracture reliability of a Zr-based bulk metallic glass

Li, B. S., Shakur Shahabi, H., Scudino, S., Eckert, J. & Kruzic, J. J., 14 Okt. 2015, in: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 646, S. 242-248 7 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Revisiting fatigue crack growth in various grain size regimes of Ni

Leitner, T., Hohenwarter, A. & Pippan, R., 14 Okt. 2015, in: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 646, S. 294-305 12 S., 32705.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Characterization of the high temperature deformatin behavior of two intermetallic TiAl-Mo alloys

Godor, F., Werner, R., Lindemann, J., Clemens, H. & Mayer, S., 18 Sept. 2015, (Elektronische Veröffentlichung vor Drucklegung.) in: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 648.2015, 11 November, S. 208-216 9 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Elevated temperature mechanical properties of novel ultra-fine grained Cu-Nb composites

Primorac, M.-M., Abad, M. D., Hosemann, P., Kreuzeder, M., Maier, V. & Kiener, D., 2015, in: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 625, S. 296-302

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Incremental high pressure torsion as a novel severe plastic deformation process: Processing features and application to copper

Hohenwarter, A., 2015, in: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 626, S. 80-85

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Yield strength prediction in Ni-base alloy 718Plus based on thermo-kinetic precipitation simulation

Ahmadi, M. R., Povoden-Karadeniz, E., Whitmore, L., Stockinger, M., Falahati, A. & Kozeschnik, E., 1 Juli 2014, in: Materials Science and Engineering A. 608, S. 114-122 9 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Comparison of microstructural crack paths between hypo-eutectic Al-Si-Cu and Al-Si-Mg cast alloys in high plasticity regimes under rotating bending

Huter, P., Winter, G., Renhart, P., Schwab, M., Oberfrank, S., Grün, F. & Stauder, B., 2014, in: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 618, S. 578-585

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Hot-working behavior of an advanced intermetallic multi-phase gamma-TiAl based alloy

Schwaighofer, E., Clemens, H., Lindemann, J., Stark, A. & Mayer, S., 2014, in: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 614, S. 297-310

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Microstructural investigation of thermally aged nickel-based superalloy 718Plus

Whitmore, L., Ahmadi, M. R., Stockinger, M., Povoden-Karadeniz, E., Kozeschnik, E. & Leitner, H., 2014, in: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 594, S. 253-259

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

The microstructure of heat-treated nickel-based superalloy 718Plus

Whitmore, L., Ahmadi, M. R., Guetaz, L., Leitner, H., Povoden-Karadeniz, E., Stockinger, M. & Kozeschnik, E., 2014, in: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 610, S. 39-45

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

The influence of microstructure and operating temperature on the fatigue endurance of hot forged Inconel (R) 718 components

Maderbacher, H., Oberwinkler, B., Gänser, H.-P., Tan, W., Rollett, M. & Stoschka, M., 15 Nov. 2013, in: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 585, S. 123-131

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Activation Parameters for Deformation of Ultrafine-Grained Aluminium as Determined by Indentation Strain Rate Jumps at Elevated Temperature

Wheeler, J. M., Maier, V., Durst, K., Göken, M. & Michler, J., 2013, in: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 585, S. 108-113

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Direct or indirect: Influence of type of retained austenite decomposition during tempering on the toughness of a hot-work tool steel

Lerchbacher, C., Zinner, S. & Leitner, H., 2013, in: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 564, S. 163-168

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Influence of bulk pre-straining on the size effect in nickel compression pillars

Schneider, A. S., Kiener, D., Yakacki, C. M., Maier, H. J., Gruber, P. A., Tamura, N., Kunz, M., Minor, A. M. & Frick, C. P., 2013, in: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 559, S. 147-158 12 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)