The significance of the elastic modulus of wood cell walls obtained from nanoindentation measurements

Gindl, W. & Schöberl, T., 2004, in: Composites <Guildford, Surrey> / A. A 35, S. 1345-1349

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Lignin-based multiwall carbon nanotubes

Gindl-Altmutter, W., Köhnke, J., Unterweger, C., Gierlinger, N., Keckes, J., Zalesak, J. & Rojas, O. J., 22 März 2019, (Elektronische Veröffentlichung vor Drucklegung.) in: Composites Part A: Applied Science and Manufacturing. 121.2019, June, S. 175-179 5 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

On the investigation of quasi-static crack resistance of thermoplastic tape layered composites with multiple delaminations: Approaches for quantification

Khudiakova, A., Brunner, A. J., Wolfahrt, M., Wettemann, T., Godec, D. & Pinter, G., Okt. 2021, in: Composites Part A: Applied Science and Manufacturing. 149.2021, October, 10 S., 106484.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

In-plane permeability characterization of engineering textiles based on radial flow experiments: A benchmark exercise

May, D., Aktas, A., Advani, S. G., Berg, D. C., Endruweit, A., Fauster, E., Lomov, S. V., Long, A., Mitschang, P., Abaimov, S., Abliz, D., Akhatov, I., Ali, M. A., Allen, T. D., Bickerton, S., Bodaghi, M., Caglar, B., Caglar, H., Chiminelli, A. & Correia, N. &35 mehr, Cosson, B., Danzi, M., Dittmann, J., Ermanni, P., Francucci, G., George, A., Grishaev, V., Hancioglu, M., Kabachi, M. A., Kind, K., Deléglise-Lagardère, M., Laspalas, M., Lebedev, O. V., Lizaranzu, M., Liotier, P. J., Middendorf, P., Morán, J., Park, C. H., Pipes, R. B., Pucci, M. F., Raynal, J., Rodriguez, E. S., Schledjewski, R., Schubnel, R., Sharp, N., Sims, G., Sozer, E. M., Sousa, P., Thomas, J., Umer, R., Wijaya, W., Willenbacher, B., Yong, A., Zaremba, S. & Ziegmann, G., 1 Juni 2019, in: Composites Part A: Applied Science and Manufacturing. 121.2019, June, S. 100-114 15 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

A new ISO standard for the experimental characterization of in-plane permeability of fibrous reinforcements

May, D., Advani, S. G., Duhovic, M., Endruweit, A., Fauster, E., George, A., Liotier, P. J., Lira, C., Lomov, S. V., Pucci, M. F., Schmeer, S., Abliz, D., Berg, D. C., Binetruy, C., Bodaghi, M., Comas-Cardona, S., Etchells, M., Govignon, Q., Koorevaar, A. & Michaud, V. &9 mehr, Park, C. H., Schubnel, R., Sousa, P., Ravel, R., Rouhi, M., Syerko, E., Umer, R., Vollmer, M. & Yong, A., 20 Nov. 2024, in: Composites Part A: Applied Science and Manufacturing. 190.2025, March, 13 S., 108592.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Strong high-density composites from wheat straw

Neudecker, F., Veigel, S., Bodner, S., Keckes, J., Duchoslav, J., Stifter, D. & Gindl-Altmutter, W., 18 Okt. 2024, in: Composites Part A: Applied Science and Manufacturing. 188.2025, January, 11 S., 108533.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Anisotropic properties of oriented short carbon fibre filled polypropylene parts fabricated by extrusion-based additive manufacturing

Spoerk, M., Savandaiah, C., Arbeiter, F., Traxler, G., Cardon, L., Holzer, C. & Sapkota, J., 11 Juni 2018, in: Composites Part A: Applied Science and Manufacturing. 113.2018, October, S. 95-104 10 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Strength and damage tolerance of composite–composite joints with steel and titanium through the thickness reinforcements

Stelzer, S., Ucsnik, S. & Pinter, G., 2016, in: Composites Part A: Applied Science and Manufacturing. 88, S. 39–47

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

High-performance composite with 100% bio-based carbon content produced from epoxidized linseed oil, citric acid and flax fiber reinforcement

Todorovic, A., Blößl, Y., Oreski, G. & Resch-Fauster, K., Jan. 2022, in: Composites Part A: Applied Science and Manufacturing. 152.2022, January, 9 S., 106666.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Inline tape width control for thermoplastic automated tape layup

Yadav, N. & Schledjewski, R., 21 Okt. 2022, in: Composites Part A: Applied Science and Manufacturing. 163.2022, December, 9 S., 107267.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)