Influence of processing parameters on the fabrication of a Cu-Al-Ni-Mn shape-memory alloy by selective laser melting

Gustmann, T., Neves, A., Kühn, U., Gargarella, P., Kiminami, C. S., Bolfarini, C., Eckert, J. & Pauly, S., 1 Juli 2016, in: Additive Manufacturing. 11.2016, July, S. 23-31 9 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Microstructure characterization of SLM-processed Al-Mg-Sc-Zr alloy in the heat treated and HIPed condition

Spierings, A. B., Dawson, K., Dumitraschkewitz, P., Pogatscher, S. & Wegener, K., 1 März 2018, in: Additive Manufacturing. 20.2018, March, S. 173-181 9 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Additive manufacturing of zirconia parts by fused filament fabrication and solvent debinding: Selection of binder formulation

Cano Cano, S., Gonzalez-Gutierrez, J., Sapkota, J., Spörk, M., Arbeiter, F., Schuschnigg, S., Holzer, C. & Kukla, C., 1 März 2019, in: Additive Manufacturing. 26.2019, March, S. 117–128 12 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Inter-layer bonding characterisation between materials with different degrees of stiffness processed by fused filament fabrication

Khudiakova, A., Arbeiter, F., Spoerk, M., Wolfahrt, M., Godec, D. & Pinter, G., 1 Aug. 2019, in: Additive Manufacturing. 28.2019, August, S. 184-193 10 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Fused filament fabrication, debinding and sintering as a low cost additive manufacturing method of 316L stainless steel

Thompson, Y., Gonzalez-Gutierrez, J., Kukla, C. & Felfer, P., 9 Sept. 2019, in: Additive Manufacturing. 30.2019, December, 8 S., 100861.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Inconel-Steel Multilayers by Liquid Dispersed Metal Powder Bed Fusion: Microstructure, Residual Stress and Property Gradients

Bodner, S. C., van de Vorst, L. T. G., Zalesak, J., Todt, J., Keckes, J., Maier-Kiener, V., Sartory, B., Schell, N., Hooijmans, J. W., Saurwalt, J. J. & Keckes, J., März 2020, in: Additive Manufacturing. 32.2020, March, 101027.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Process-induced morphological features in material extrusion-based additive manufacturing of polypropylene

Petersmann, S., Spörk-Erdely, P., Feuchter, M., Wieme, T., Arbeiter, F. & Spörk, M., 18 Juni 2020, in: Additive Manufacturing. 35.2020, October, 16 S., 101384.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Systematic analysis of the mechanical anisotropy of fibre-reinforced polymer specimens produced by laser sintering

Khudiakova, A., Berer, M., Niedermair, S., Plank, B., Truszkiewicz, E., Meier, G., Stepanovsky, H., Wolfahrt, M., Pinter, G. & Lackner, J., 17 Okt. 2020, (Elektronische Veröffentlichung vor Drucklegung.) in: Additive Manufacturing. 36.2020, December, 14 S., 101671.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Fatigue strength estimation methodology of additively manufactured metallic bulk material

Schneller, W., Leitner, M., Leuders, S., Sprauel, J. M., Grün, F., Pfeifer, T. & Jantschner, O., 4 Nov. 2020, (Elektronische Veröffentlichung vor Drucklegung.) in: Additive Manufacturing. 39.2021, March, 13 S., 101688.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Damage tolerance-based methodology for fatigue lifetime estimation of a structural component produced by material extrusion-based additive manufacturing

Arbeiter, F., Trávníček, L., Petersmann, S., Dlhý, P., Spoerk, M., Pinter, G. & Hutař, P., Dez. 2020, in: Additive Manufacturing. 36, 101730.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)