Trans Tech Publications

Publisher

1 - 42 out of 42Page size: 50

Research output

  1. 2025
  2. Published

    Interaction of Binder and Powder in Processing of Titanium by MEX-AM

    Kukla, C., Gordo, E., Schuschnigg, S., Villemur, J., Luna, P. & Holzer, C., 2025, The 7th Powder Metallurgy and Additive Manufacturing of Titanium (PMTi 2024): Selected peer-reviewed extended articles based on abstracts presented at the 7th International Conference on Powder Metallurgy and Additive Manufacturing of Titanium (PMTi2024). Gordo Odériz, E. & Ruiz-Navas, E. M. (eds.). Trans Tech Publications, p. 93-103

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  3. 2023
  4. Published

    A Comparison of Microstructure and Casting Defects of Rheocasting and Thixocasting Al-Si-Mg Alloy

    Li, J., Spacil, I., Winklhofer, J., Hofstätter, F. & Griesebner, S., 2023, Solid State Phenomena. Trans Tech Publications, p. 61-66 6 p. (Solid State Phenomena; vol. 347).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  5. 2022
  6. Published

    Capillary Driven Saturation of Textile Reinforcing Structures Proposal for an Extension of Lucas-Washburn Equation

    Schledjewski, R., Blößl, Y. & Neunkirchen, S., 22 Jul 2022, Achievements and Trends in Material Forming- Peer-reviewed extended papers selected from the 25th International Conference on Material Forming, ESAFORM 2022. Vincze, G. & Barlat, F. (eds.). Trans Tech Publications, p. 1372-1378 7 p. (Key Engineering Materials; vol. 926 KEM).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  7. Published

    Using Recycled Materials for Semi-Solid Processing of Al-Si-Mg Based Alloys

    LI, J., Zhang, X., Winklhofer, J., Griesebner, S., Oberdorfer, B., Jie, W. & Schumacher, P., 10 Jan 2022, Solid State Phenomena. January ed. Trans Tech Publications, Vol. 327.2022. p. 207-222 16 p. (Solid State Phenomena).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  8. Published

    Effect of Solute Ta on Grain Refinement of Al-7Si-0.3Mg Based Alloys

    Spacil, I., Holec, D., Schumacher, P. & Li, J., 2022, Semi-Solid of Alloys and Composites XVI - Selected peer-reviewed full text papers from the 16th International Conference on Semi-Solid Processing of Alloys and Composites, S2P 2021. Li, J. & Rassili, A. (eds.). Trans Tech Publications, p. 54-64 11 p. (Solid State Phenomena; vol. 327 SSP).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  9. 2021
  10. Published

    Multi-class grain size model for forged alloy 718 aircraft parts

    Gruber, C., Raninger, P., Stockinger, M. & Bucher, C., 2021, THERMEC 2021 - International Conference on Processing and Manufacturing of Advanced Materials Processing, Fabrication, Properties, Applications. Ionescu, M., Sommitsch, C., Poletti, C., Kozeschnik, E. & Chandra, T. (eds.). Trans Tech Publications, p. 499-508 10 p. (Materials Science Forum; vol. 1016 MSF).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  11. 2020
  12. Published

    Lifetime calculation of soil-loaded non-pressure polymer pipes

    Poduška, J., Hutař, P., Frank, A., Pinter, G. & Náhlík, L., 2020, Advances in Fracture and Damage Mechanics XVIII. Paipetis, S. A. & Aliabadi, F. M. H. (eds.). Trans Tech Publications, p. 141-146 6 p. (Key Engineering Materials; vol. 827 KEM).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  13. 2019
  14. Published

    Optimization of the specimen geometry of unidirectional reinforced composites with a fibre orientation of 90° for tensile, quasi-static and fatigue tests

    Schneider, C., Drvoderic, M., Schuecker, C. & Pinter, G., 28 Jun 2019, 22nd Symposium on Composites. Hausmann, J. M. (ed.). Trans Tech Publications, p. 594-597 4 p. (Key Engineering Materials; vol. 809 KEM).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  15. Published

    Controlling moisture content of natural fibres in RTM-process

    Salzmann, M. & Schledjewski, R., 1 Jan 2019, 22nd Symposium on Composites. Hausmann, J. M. (ed.). Trans Tech Publications, p. 610-614 5 p. (Key Engineering Materials; vol. 809 KEM).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  16. Published

    Novel approach for the lifetime prediction of composite materials under static loads

    Gloggnitzer, S., Pilz, G., Schneider, C. & Pinter, G., 1 Jan 2019, 22nd Symposium on Composites. Hausmann, J. M. (ed.). Trans Tech Publications, p. 620-624 5 p. (Key Engineering Materials; vol. 809 KEM).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  17. Published

    Single Edge Precrack V-Notched Beam (SEPVNB) Fracture Toughness Testing on Silicon Nitride

    Nindhia, T. G. T. & Lube, T., 2019, Materials science forum. Trans Tech Publications, Vol. 962. p. 205-209 5 p. (Materials Science Forum).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  18. 2018
  19. Published

    High temperature friction and wear testing for closed-die steel and aluminium forgings

    Buchmayr, B. & Elser, J., 1 Jan 2018, Tribology in Manufacturing Processes and Joining by Plastic Deformation II. Trans Tech Publications, p. 204-211 8 p. (Key Engineering Materials; vol. 767 KEM).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  20. 2017
  21. Published

    High performance green composites for green technologies

    Schledjewski, R., Lloret Pertegas, S., Blößl, Y., Anusic, A., Resch-Fauster, K., Mahendran, A. R. & Wuzella, G., 6 Jul 2017, Key Engineering Materials. Trans Tech Publications, Vol. 742. p. 271-277 7 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  22. Published

    Comparative study of optimization in pultrusion with pre-heating and die-cooler temperature for improved cure

    Costa Dias, R. D. C., de Sousa Santos, L. & Schledjewski, R., 1 Jan 2017, THERMEC 2016. Ionescu, M., Mishra, B., Kozeschnik, E., Sommitsch, C., Chandra, T. & Mishra, B. (eds.). Trans Tech Publications, p. 402-407 6 p. (Materials Science Forum; vol. 879).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  23. Published

    Granulation of bulk metallic glass forming alloys as a feedstock for thermoplastic forming and their compaction into bulk samples

    Geissler, D., Grosse, J., Donath, S., Ehinger, D., Stoica, M., Eckert, J. & Kühn, U., 2017, THERMEC 2016. Trans Tech Publications, Vol. 879. p. 589-594 6 p. (Materials Science Forum; vol. 879).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  24. Published

    Intrinsic behaviour of mode II and mode III long fatigue cracks in zirconium and the Ti-6Al-4V alloy

    Vojtek, T., Pokluda, J., Hohenwarter, A. & Pippan, R., 2017, Materials Structure and Micromechanics of Fracture VIII. Trans Tech Publications, Vol. 258 SSP. p. 265-268 4 p. (Solid State Phenomena; vol. 258 SSP).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  25. 2016
  26. Published

    Effect of Cu and Gd on structural and magnetic properties of Fe-Co-B-Si-Nb metallic glasses

    Ramasamy, P., Stoica, M., Calin, M. & Eckert, J., 2016, Advanced Materials and Structures VI. Trans Tech Publications, Vol. 254. p. 60-64 5 p. (Solid State Phenomena; vol. 254).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  27. Published

    Residual lifetime determination of low temperature co-fired ceramics

    Majer, Z., Štegnerová, K., Hutar, P., Pletz, M., Bermejo, R. & Náhlík, L., 2016, Advances in Fracture and Damage Mechanics XV. Trans Tech Publications, Vol. 713. p. 266-269 4 p. (Key Engineering Materials; vol. 713).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  28. 2015
  29. Published

    Virtual process design for cold formed components

    Schratter, S., Keckes, J., Winter, G. & Buchmayr, B., 16 Apr 2015, Material Forming ESAFORM 2015. Trans Tech Publications, p. 1279 - 1284 (Key Engineering Materials ; vol. Vol 651-653).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  30. 2014
  31. Published

    Influence of dendritic morphology on the calculation of macrosegregation in steel ingot

    Li, J., Wu, M. H., Ludwig, A., Kharicha, A. & Schumacher, P., 1 Jan 2014, Solidification and Gravity VI. Trans Tech Publications, p. 121-126 6 p. (Materials Science Forum; vol. 790-791).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  32. Published

    Simulation of solidification and convection of NH4Cl-H2O solution in a water-cooled copper mold

    Ahmadein, M., Wu, M., Stefan Kharicha, M., Kharicha, A. & Ludwig, A., 1 Jan 2014, Solidification and Gravity VI. Trans Tech Publications, p. 247-252 6 p. (Materials Science Forum; vol. 790-791).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  33. Published

    Cyclic loading of polyetheretherketone at high tensile stress levels

    Berer, M., Major, Z., Pinter, G., Constantinescu, D. M. & Marsavina, L., 2014, Experimental Stress Analysis and Materials 14. Trans Tech Publications, p. 12-16 5 p. (Key Engineering Materials; vol. 601).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  34. Published

    Modelling of the ductile damage behaviour of a beta solidifying gamma titanium aluminide alloy during hot-working

    Halici, D., Prodinger, D., Poletti, C., Huber, D., Stockinger, M. & Sommitsch, C., 2014, THERMEC 2013. Mishra, B., Ionescu, M. & Chandra, T. (eds.). Trans Tech Publications, p. 556-561 6 p. (Materials Science Forum; vol. 783-786).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  35. Published

    Numerical study of the influence of diffusion-governed growth kinetics of ternary alloy on macrosegregation

    Wu, M. H., Kharicha, A. & Ludwig, A., 2014, Materials Science Forum. Trans Tech Publications, p. 85-90 6 p. (Materials Science Forum; vol. 790-791).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  36. Published

    Simulation of yield strength in Allvacspi® 718Plus™

    Ahmadi, M. R., Whitmore, L., Povoden-Karadeniz, E., Stockinger, M., Falahati, A. & Kozeschnik, E., 2014, THERMEC 2013 Supplement. Trans Tech Publications, p. 7-12 6 p. (Advanced Materials Research; vol. 922).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  37. Published

    Studies on ductile damage and flow instabilities during hot deformation of a multiphase ã-TiAl alloy

    Halici, D., Zamani, H. A., Prodinger, D., Poletti, C., Huber, D., Stockinger, M. & Sommitsch, C., 2014, Material Forming ESAFORM 2014. Trans Tech Publications, p. 99-105 7 p. (Key Engineering Materials; vol. 611-612).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  38. 2013
  39. Published

    Modeling of dual-phase grain structure in Ti-6Al-4V during isothermal and non-isothermal heat treatment using cellular automata

    Krumphals, A., Poletti, C., Warchomicka, F., Stockinger, M. & Sommitsch, C., 2013, Recrystallization and Grain Growth V. Trans Tech Publications, p. 353-356 4 p. (Materials Science Forum; vol. 753).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  40. 2012
  41. Published

    Determination of the mechanism of restoration in subtransus hot deformation of Ti-6Al-4V

    Warchomicka, F., Poletti, C., Stockinger, M. & Degischer, H. P., 2012, THERMEC 2011. Trans Tech Publications, p. 252-257 6 p. (Materials Science Forum; vol. 706-709).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  42. Published

    Influence of temperature and strain rate on dynamic softening processes in Allvac® 718Plus™

    Mitsche, S., Sommitsch, C., Huber, D., Stockinger, M. & Poelt, P., 2012, THERMEC 2011. Trans Tech Publications, p. 2440-2445 6 p. (Materials Science Forum; vol. 706-709).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  43. 2011
  44. Published

    Experimental investigation of gas-heavy oil molecular diffusion coefficient in porous media: Experimental results for CO2 in Iranian Crudes

    Mirjordavi, N., Kazemeini, M., Kharrat, R., Ghazanfari, M. H. & Salehi, A., 2011, Diffusion in Solids and Liquids VI: Mass Transfer - Heat Transfer - Microstructure and Properties - Nanodiffusion and Nanostructured Materials. Trans Tech Publications, Vol. 312-315. p. 1049-1054 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  45. Published

    Lifetime optimization of hot forged aerospace components by linking microstructural evaluation and fatigue behaviour

    Maderbacher, H., Gänser, H.-P., Riedler, M., Stoschka, M., Stockinger, M. & Eichlseder, W., 2011, Euro Superalloys 2010. Trans Tech Publications, p. 162-167 (Advanced materials research; vol. 278).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  46. 2010
  47. Published

    Interaction of the precipitation kinetics of δ and γ' phases in nickel-base superalloy ATI Allvac® 718Plus™

    Radis, R., Zickler, G. A., Stockinger, M., Sommitsch, C. & Kozeschnik, E., 2010, THERMEC 2009. Chandra, T., Chandra, T., Chandra, T., Wanderka, N., Wanderka, N., Wanderka, N., Reimers, W., Reimers, W., Reimers, W., Ionescu, M., Ionescu, M. & Ionescu, M. (eds.). Trans Tech Publications, p. 2712-2717 6 p. (Materials Science Forum; vol. 638-642).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  48. Published

    Metadynamic recrystallization of the nickel-based superalloy Allvac 718Plus™

    Sommitsch, C., Huber, D. & Stockinger, M., 2010, THERMEC 2009. Chandra, T., Chandra, T., Chandra, T., Wanderka, N., Wanderka, N., Wanderka, N., Reimers, W., Reimers, W., Reimers, W., Ionescu, M., Ionescu, M. & Ionescu, M. (eds.). Trans Tech Publications, p. 2327-2332 6 p. (Materials Science Forum; vol. 638-642).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  49. 2009
  50. Published

    Fractography of Advanced Ceramics III: Theoretical, Experimental, Review, Basic - Fundamental (Grundlagenforschung)

    Dusza, J., Danzer, R. (Co-editor), Morrell, R. & Quinn, G. D., 2009, Uetikon-Zuerich: Trans Tech Publications. (Key Engineering Materials; vol. 409)

    Research output: Book/Report › Book › Research

  51. 2008
  52. Published

    Temperature Dependence of Residual Stress Gradients in Shot-Peened Steel Coated with CrN

    Martinschitz, K. J., Kirchlechner, C., Daniel, R., Maier, G., Mitterer, C. & Keckes, J., 2008, Stress evaluation in materials using neutrons and synchrotron radiation : selected, peer reviewed papers from the International Conference on Stress Evaluation Using Neutrons and Synchrotron Radiation proceedings, Vienna 24 – 26 September 2007 . Pyzalla, A. R. (ed.). Stafa-Zurich [u.a.] : Trans Tech Publications, p. 101-106 (Materials Science Forum; vol. 571/572 ).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  53. 2005
  54. Published

    Crystal restoration during severe plastic deformation

    Stüwe, H.-P., 2005, Proceedings of the 3rd International Conference on Nanomaterials by Severe Plastic Deformation. Trans Tech Publications, p. 175-178

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  55. Published

    Differences in structural evolution in single- and dual-phase materials during severe plastic deformation

    Pippan, R., Vorhauer, A., Wetscher, F., Faleschini, M., Hafok, M. & Sabirov, I., 2005, Proceedings of the 3rd International Conference on Nanomaterials by Severe Plastic Deformation. Trans Tech Publications, p. 407-412

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  56. Published

    Fabrication of a W-25%Cu nanocomposite by high pressure torsion

    Sabirov, I., Schöberl, T. & Pippan, R., 2005, Proceedings of the 3rd International Conference on Nanomaterials by Severe Plastic Deformation. Trans Tech Publications, p. 561-566

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  57. Published

    High pressure torsion of rail steels

    Wetscher, F., Tian, B., Stock, R. & Pippan, R., 2005, Proceedings of the 3rd International Conference on Nanomaterials by Severe Plastic Deformation. Trans Tech Publications, p. 455-460

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  58. Published

    HPT-Deformation of Copper and Nickel Single Crystals

    Hafok, M., Vorhauer, A., Keckes, J. & Pippan, R., 2005, 3rd International Conference on Nanomaterials by Severe Plastic Deformation. Trans Tech Publications, p. 621-626

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  59. Published

    Magnetic properties and microstructure of a FeCo ferritic steel after severe plastic deformation

    Vorhauer, A., Rumpf, K., Granitzer, P., Kleber, S., Krenn, H. & Pippan, R., 2005, : Proceedings of the 3rd International Conference on Nanomaterials by Severe Plastic Deformation. Trans Tech Publications, p. 299-304

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  60. 1994
  61. Published

    Mechanical properties of some Si3N4 automotive gas turbine rotor ceramics

    Dusza, J., Lube, T., Danzer, R. & Weisskopf, K. L., 1 Jan 1994, Key Engineering Materials. Aedermannsdorf, Switzerland: Trans Tech Publications, Vol. 89-91. p. 535-540 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

View graph of relations