Interaction of Binder and Powder in Processing of Titanium by MEX-AM

Kukla, C., Gordo, E., Schuschnigg, S., Villemur, J., Luna, P. & Holzer, C., 2025, The 7th Powder Metallurgy and Additive Manufacturing of Titanium (PMTi 2024): Selected peer-reviewed extended articles based on abstracts presented at the 7th International Conference on Powder Metallurgy and Additive Manufacturing of Titanium (PMTi2024). Gordo Odériz, E. & Ruiz-Navas, E. M. (eds.). Trans Tech Publications, p. 93-103

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

A Comparison of Microstructure and Casting Defects of Rheocasting and Thixocasting Al-Si-Mg Alloy

Li, J., Spacil, I., Winklhofer, J., Hofstätter, F. & Griesebner, S., 2023, Solid State Phenomena. Trans Tech Publications, p. 61-66 6 p. (Solid State Phenomena; vol. 347).

Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

Capillary Driven Saturation of Textile Reinforcing Structures Proposal for an Extension of Lucas-Washburn Equation

Schledjewski, R., Blößl, Y. & Neunkirchen, S., 22 Jul 2022, Achievements and Trends in Material Forming- Peer-reviewed extended papers selected from the 25th International Conference on Material Forming, ESAFORM 2022. Vincze, G. & Barlat, F. (eds.). Trans Tech Publications, p. 1372-1378 7 p. (Key Engineering Materials; vol. 926 KEM).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Using Recycled Materials for Semi-Solid Processing of Al-Si-Mg Based Alloys

LI, J., Zhang, X., Winklhofer, J., Griesebner, S., Oberdorfer, B., Jie, W. & Schumacher, P., 10 Jan 2022, Solid State Phenomena. January ed. Trans Tech Publications, Vol. 327.2022. p. 207-222 16 p. (Solid State Phenomena).

Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

Effect of Solute Ta on Grain Refinement of Al-7Si-0.3Mg Based Alloys

Spacil, I., Holec, D., Schumacher, P. & Li, J., 2022, Semi-Solid of Alloys and Composites XVI - Selected peer-reviewed full text papers from the 16th International Conference on Semi-Solid Processing of Alloys and Composites, S2P 2021. Li, J. & Rassili, A. (eds.). Trans Tech Publications, p. 54-64 11 p. (Solid State Phenomena; vol. 327 SSP).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Multi-class grain size model for forged alloy 718 aircraft parts

Gruber, C., Raninger, P., Stockinger, M. & Bucher, C., 2021, THERMEC 2021 - International Conference on Processing and Manufacturing of Advanced Materials Processing, Fabrication, Properties, Applications. Ionescu, M., Sommitsch, C., Poletti, C., Kozeschnik, E. & Chandra, T. (eds.). Trans Tech Publications, p. 499-508 10 p. (Materials Science Forum; vol. 1016 MSF).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Lifetime calculation of soil-loaded non-pressure polymer pipes

Poduška, J., Hutař, P., Frank, A., Pinter, G. & Náhlík, L., 2020, Advances in Fracture and Damage Mechanics XVIII. Paipetis, S. A. & Aliabadi, F. M. H. (eds.). Trans Tech Publications, p. 141-146 6 p. (Key Engineering Materials; vol. 827 KEM).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Optimization of the specimen geometry of unidirectional reinforced composites with a fibre orientation of 90° for tensile, quasi-static and fatigue tests

Schneider, C., Drvoderic, M., Schuecker, C. & Pinter, G., 28 Jun 2019, 22nd Symposium on Composites. Hausmann, J. M. (ed.). Trans Tech Publications, p. 594-597 4 p. (Key Engineering Materials; vol. 809 KEM).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Controlling moisture content of natural fibres in RTM-process

Salzmann, M. & Schledjewski, R., 1 Jan 2019, 22nd Symposium on Composites. Hausmann, J. M. (ed.). Trans Tech Publications, p. 610-614 5 p. (Key Engineering Materials; vol. 809 KEM).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Novel approach for the lifetime prediction of composite materials under static loads

Gloggnitzer, S., Pilz, G., Schneider, C. & Pinter, G., 1 Jan 2019, 22nd Symposium on Composites. Hausmann, J. M. (ed.). Trans Tech Publications, p. 620-624 5 p. (Key Engineering Materials; vol. 809 KEM).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Single Edge Precrack V-Notched Beam (SEPVNB) Fracture Toughness Testing on Silicon Nitride

Nindhia, T. G. T. & Lube, T., 2019, Materials science forum. Trans Tech Publications, Vol. 962. p. 205-209 5 p. (Materials Science Forum).

Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

High temperature friction and wear testing for closed-die steel and aluminium forgings

Buchmayr, B. & Elser, J., 1 Jan 2018, Tribology in Manufacturing Processes and Joining by Plastic Deformation II. Trans Tech Publications, p. 204-211 8 p. (Key Engineering Materials; vol. 767 KEM).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

High performance green composites for green technologies

Schledjewski, R., Lloret Pertegas, S., Blößl, Y., Anusic, A., Resch-Fauster, K., Mahendran, A. R. & Wuzella, G., 6 Jul 2017, Key Engineering Materials. Trans Tech Publications, Vol. 742. p. 271-277 7 p.

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Comparative study of optimization in pultrusion with pre-heating and die-cooler temperature for improved cure

Costa Dias, R. D. C., de Sousa Santos, L. & Schledjewski, R., 1 Jan 2017, THERMEC 2016. Ionescu, M., Mishra, B., Kozeschnik, E., Sommitsch, C., Chandra, T. & Mishra, B. (eds.). Trans Tech Publications, p. 402-407 6 p. (Materials Science Forum; vol. 879).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Granulation of bulk metallic glass forming alloys as a feedstock for thermoplastic forming and their compaction into bulk samples

Geissler, D., Grosse, J., Donath, S., Ehinger, D., Stoica, M., Eckert, J. & Kühn, U., 2017, THERMEC 2016. Trans Tech Publications, Vol. 879. p. 589-594 6 p. (Materials Science Forum; vol. 879).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Intrinsic behaviour of mode II and mode III long fatigue cracks in zirconium and the Ti-6Al-4V alloy

Vojtek, T., Pokluda, J., Hohenwarter, A. & Pippan, R., 2017, Materials Structure and Micromechanics of Fracture VIII. Trans Tech Publications, Vol. 258 SSP. p. 265-268 4 p. (Solid State Phenomena; vol. 258 SSP).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Effect of Cu and Gd on structural and magnetic properties of Fe-Co-B-Si-Nb metallic glasses

Ramasamy, P., Stoica, M., Calin, M. & Eckert, J., 2016, Advanced Materials and Structures VI. Trans Tech Publications, Vol. 254. p. 60-64 5 p. (Solid State Phenomena; vol. 254).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Residual lifetime determination of low temperature co-fired ceramics

Majer, Z., Štegnerová, K., Hutar, P., Pletz, M., Bermejo, R. & Náhlík, L., 2016, Advances in Fracture and Damage Mechanics XV. Trans Tech Publications, Vol. 713. p. 266-269 4 p. (Key Engineering Materials; vol. 713).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Virtual process design for cold formed components

Schratter, S., Keckes, J., Winter, G. & Buchmayr, B., 16 Apr 2015, Material Forming ESAFORM 2015. Trans Tech Publications, p. 1279 - 1284 (Key Engineering Materials ; vol. Vol 651-653).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Influence of dendritic morphology on the calculation of macrosegregation in steel ingot

Li, J., Wu, M. H., Ludwig, A., Kharicha, A. & Schumacher, P., 1 Jan 2014, Solidification and Gravity VI. Trans Tech Publications, p. 121-126 6 p. (Materials Science Forum; vol. 790-791).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution