Sputtered polymeric hydrogenated amorphous carbon thin films for temporary medical implants

Research output: ThesisDiploma Thesispeer-review

Standard

Sputtered polymeric hydrogenated amorphous carbon thin films for temporary medical implants. / Pachlhofer, Julia.
2013. 52 p.

Research output: ThesisDiploma Thesispeer-review

Bibtex - Download

@phdthesis{989066cec6ca45a584d382b75e0ffe6b,
title = "Sputtered polymeric hydrogenated amorphous carbon thin films for temporary medical implants",
abstract = "Presently, temporary metallic implants, like bone nails, based on stainless steel and titanium are widely employed. Since, these implants have to be removed after fracture healing, there are reflections about bio-degradable implants based on magnesium. To ensure that the magnesium based implant is stable during the healing process, a biocompatible diffusion barrier to the surrounding tissue is required. For this task, hydrogenated amorphous diamond-like carbon (DLC) may be a potential candidate. Within this work, hydrogen containing DLC coatings were produced by reactive unbalanced magnetron sputtering in an argon/acetylene (Ar/C2H2) atmosphere with an increasing C2H2/Ar – flow ratio. These coatings were studied concerning their structure and mechanical properties. The following investigations were done: coating thickness measurements, Elastic Recoil Detection Analysis, X-ray diffraction, X-ray photoelectron spectroscopy and Raman spectroscopy for structure information as well as nanoindentation and residual stress measurements to determine mechanical properties. The coatings show an amorphous and dense structure with a smooth surface as well as a decreasing nanohardness (from ~25 to 8 GPa) and Young{\textquoteright}s modulus (from ~187 to 55 GPa) with an increasing C2H2/Ar – flow ratio, which indicates an increasing graphitic film structure.",
keywords = "d{\"u}nne Schichten, Magnetronsputtern, hydrogenisierter amorpher Kohlenstoff, medizinische Implantate, thin films, sputtering, hydrogenated amorphous diamond-like carbon, medical implants",
author = "Julia Pachlhofer",
note = "embargoed until null",
year = "2013",
language = "English",
type = "Diploma Thesis",
school = "Montanuniversitaet Leoben (000)",

}

RIS (suitable for import to EndNote) - Download

TY - THES

T1 - Sputtered polymeric hydrogenated amorphous carbon thin films for temporary medical implants

AU - Pachlhofer, Julia

N1 - embargoed until null

PY - 2013

Y1 - 2013

N2 - Presently, temporary metallic implants, like bone nails, based on stainless steel and titanium are widely employed. Since, these implants have to be removed after fracture healing, there are reflections about bio-degradable implants based on magnesium. To ensure that the magnesium based implant is stable during the healing process, a biocompatible diffusion barrier to the surrounding tissue is required. For this task, hydrogenated amorphous diamond-like carbon (DLC) may be a potential candidate. Within this work, hydrogen containing DLC coatings were produced by reactive unbalanced magnetron sputtering in an argon/acetylene (Ar/C2H2) atmosphere with an increasing C2H2/Ar – flow ratio. These coatings were studied concerning their structure and mechanical properties. The following investigations were done: coating thickness measurements, Elastic Recoil Detection Analysis, X-ray diffraction, X-ray photoelectron spectroscopy and Raman spectroscopy for structure information as well as nanoindentation and residual stress measurements to determine mechanical properties. The coatings show an amorphous and dense structure with a smooth surface as well as a decreasing nanohardness (from ~25 to 8 GPa) and Young’s modulus (from ~187 to 55 GPa) with an increasing C2H2/Ar – flow ratio, which indicates an increasing graphitic film structure.

AB - Presently, temporary metallic implants, like bone nails, based on stainless steel and titanium are widely employed. Since, these implants have to be removed after fracture healing, there are reflections about bio-degradable implants based on magnesium. To ensure that the magnesium based implant is stable during the healing process, a biocompatible diffusion barrier to the surrounding tissue is required. For this task, hydrogenated amorphous diamond-like carbon (DLC) may be a potential candidate. Within this work, hydrogen containing DLC coatings were produced by reactive unbalanced magnetron sputtering in an argon/acetylene (Ar/C2H2) atmosphere with an increasing C2H2/Ar – flow ratio. These coatings were studied concerning their structure and mechanical properties. The following investigations were done: coating thickness measurements, Elastic Recoil Detection Analysis, X-ray diffraction, X-ray photoelectron spectroscopy and Raman spectroscopy for structure information as well as nanoindentation and residual stress measurements to determine mechanical properties. The coatings show an amorphous and dense structure with a smooth surface as well as a decreasing nanohardness (from ~25 to 8 GPa) and Young’s modulus (from ~187 to 55 GPa) with an increasing C2H2/Ar – flow ratio, which indicates an increasing graphitic film structure.

KW - dünne Schichten

KW - Magnetronsputtern

KW - hydrogenisierter amorpher Kohlenstoff

KW - medizinische Implantate

KW - thin films

KW - sputtering

KW - hydrogenated amorphous diamond-like carbon

KW - medical implants

M3 - Diploma Thesis

ER -