Research output

1 - 50 out of 388Page size: 50

Sort by: Publication date

2024
Published
Optimizing the tunnel ventilation design related to respirable dust in tunnelling by using CFD
Wei, R., Galler, R. & Weiß, C., 29 May 2024.
Research output: Contribution to conference › Paper › peer-review
Published
Determining the critical Reynolds number for suppressing Marangoni convection of alumina in silicate melt
Burhanuddin, B., Harmuth, H. & Vollmann, S., 29 Feb 2024, In: Ceramics International : CI. 50, 11, p. 18323-18328 6 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
A Modified Rotating-Finger Test Aiming to Quantify Refractory Wear Based on Fundamental Equations Governing Refractory Dissolution and Erosion
Burhanuddin, B. & Harmuth, H., 6 Feb 2024, Advances in Pyrometallurgy: Furnace Containment. Springer, p. 119-132
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
2023
Published
Dissolution of Magnesia in Silicate Melts and Diffusivity Determination from CLSM Studies
Burhanuddin, B. & Harmuth, H., 21 Jul 2023, In: Applied Sciences : open access journal. 13.2023, 14, p. 8458 8 p., 8458.
Research output: Contribution to journal › Article › Research › peer-review
Published
Calculation of mass transfer for rotating finger test equipment
Burhanuddin, B., Harmuth, H. & Guarco, J., 4 Jul 2023.
Research output: Contribution to conference › Presentation › Research
Published
Influence of various sorts of coke breeze on the off-gas composition during iron ore sintering
Eisbacher-Lubensky, J., Weiß, C., Wegscheider, S. & Brus, C., 14 Jun 2023. 8 p.
Research output: Contribution to conference › Paper
E-pub ahead of print
Creep strain recovery of an in situ spinel-forming refractory castable under loading/unloading compressive creep conditions
Akbari, B., Gruber, D., Jin, S. & Harmuth, H., 17 May 2023, (E-pub ahead of print) In: Ceramics International. 49.2023, 15, p. 25225-25231 7 p.
Research output: Contribution to journal › Article › Research › peer-review
E-pub ahead of print
Anisotropy of fracture mechanical properties of carbon-containing refractories and its impact on cracking in a steel ladle lining
Gruber, D., Schachner, S. & Harmuth, H., 2 May 2023, (E-pub ahead of print) In: Open ceramics. 14.2023, June, 5 p., 100363.
Research output: Contribution to journal › Article › Research › peer-review
Published
Critical comparison of experimental and computational fluid dynamic results for a sample introduction system in plasma spectrometry
Fasch, E., Maier, H., Landertshamer, F., Weiß, C., Prohaska, T. & Wegscheider, W., 1 Feb 2023.
Research output: Contribution to conference › Poster › Research › peer-review
2022
Published
Quantification of Magnesia Dissolution in Silicate Melts and Diffusivity Determination Using Rotating Finger Test
Burhanuddin, B., Harmuth, H. & Vollmann, S., 13 Dec 2022, In: Applied Sciences : open access journal. 12.2022, 24, 13 p., 12791.
Research output: Contribution to journal › Article › Research › peer-review
Published
Method for inverse calculation of erosion parameters in slag-refractory systems
Guarco, J., Vollmann, S., Harmuth, H. & Burhanuddin, B., Dec 2022, In: Materials Today Communications. 33.2022, December, 10 p., 104736.
Research output: Contribution to journal › Article › Research › peer-review
Published
A Comprehensive Review of Secondary Carbon Bio-Carriers for Application in Metallurgical Processes: Utilization of Torrefied Biomass in Steel Production
Kieush, L., Rieger, J., Schenk, J., Brondi, C., Rovelli, D., Echterhof, T., Cirilli, F., Thaler, C. M., Jaeger, N., Snaet, D., Peters, K. & Colla, V., 23 Nov 2022, In: Metals. 12.2022, 12, 38 p., 2005.
Research output: Contribution to journal › Review article › peer-review
Published
Influence of the Fine Fraction and Sintering on Selected Isotropic and Anisotropic Bulk Properties of Uniaxial Compacts
Fruhstorfer, J., Wagner, M., Gruber, D. & Harmuth, H., 14 Sept 2022, In: Interceram. 71.2022, September, p. 38-47 10 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
CHARACTERISATION OF A SAMPLE INTRODUCTION SYSTEM FOR PLASMA SPECTROMETRY BY COMPUTATIONAL FLUID DYNAMICS
Fasch, E., Maier, H., Landertshamer, F., Weiß, C., Prohaska, T. & Wegscheider, W., Sept 2022, ICP-MS AWT2022 LEOBEN-BOOK OF ABSTRACTS.
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
E-pub ahead of print
Zirconium oxycarbides and oxycarbonitrides: A review
Kucheryavaya, A., Lenčéš, Z., Šajgalík, P. & Harmuth, H., 30 Aug 2022, (E-pub ahead of print) In: International journal of applied ceramic technology. 20.2023, 2, p. 541-562 22 p.
Research output: Contribution to journal › Article › Research › peer-review
E-pub ahead of print
Sherwood correlation for finger-test experiments
Guarco, J., Burhanuddin, Vollmann, S. & Harmuth, H., 27 Aug 2022, (E-pub ahead of print) In: Results in Engineering. 15.2022, September, 5 p., 100610.
Research output: Contribution to journal › Article › Research › peer-review
Published
Creep characterization and modelling of ordinary refractory ceramics under combined compression and shear loading conditions
Schachner, S., Jin, S., Gruber, D. & Harmuth, H., 1 Aug 2022, In: Ceramics International. 48.2022, 15, p. 21101-21109 9 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Mixed-mode fracture behaviour of refractories with asymmetric wedge splitting test: Part II: Experimental case study
Dai, Y. J., Jin, S., Zhou, R., Li, Y. W., Harmuth, H. & Tschegg, E. K., 15 Jul 2022, In: Ceramics International. 48.2022, 14, p. 19757-19766 10 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Mixed-mode fracture behaviour of refractories with asymmetric wedge splitting test: Part I: Numerical implementation and validation
Dai, Y., Jin, S., Li, Y. W., Wang, Q., Zhou, W. & Harmuth, H., 15 Jul 2022, In: Ceramics International. 48.2022, 14, p. 19767-19775 9 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Corrigendum to “Asymmetric creep modeling of common refractory ceramics with high temperature wedge splitting test” [Eng. Fract. Mech. 25 (2021) 107819
Jin, S. & Harmuth, H., Jul 2022, 1 p.
Research output: Other contribution › Research
Published
Contributions to Crack Propagation in Coarse Grained Refractories
Gruber, D. & Harmuth, H., 22 Jun 2022.
Research output: Contribution to conference › Presentation › Research
Published
Discrete element modelling of ordinary refractory ceramics under cold crushing testing: Influence of minimum element size
Du, W., Jin, S., Emam, S., Gruber, D. & Harmuth, H., 15 Jun 2022, In: Ceramics International. 48.2022, 12, p. 17934-17941 8 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Evaluation of CLSM measurements for dissolution studies: A case study investigating alumina dissolution in a silicate slag
Harmuth, H. & Burhanuddin, B., 14 Jun 2022, In: Ceramics International. 48.2022, 19 Part A, p. 28174-28180 7 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Method for determination of mass transfer coefficients for dissolution of dense ceramics in liquid slags
Guarco, J., Harmuth, H. & Vollmann, S., 1 May 2022, In: International journal of heat and mass transfer. 186.2022, 1 May, 11 p., 122494.
Research output: Contribution to journal › Article › Research › peer-review
E-pub ahead of print
Thermomechanical finite element modeling of steel ladle containing alumina spinel refractory lining
Samadi, S., Jin, S., Gruber, D. & Harmuth, H., 1 Apr 2022, (E-pub ahead of print) In: Finite elements in analysis and design. 206.2022, 1 September, 10 p., 103762.
Research output: Contribution to journal › Article › Research › peer-review
Published
Method for determination of effective binary diffusivities in dissolution of dense ceramic materials
Guarco, J., Burhanuddin, B., Vollmann, S. & Harmuth, H., 15 Mar 2022, In: Ceramics International.
Research output: Contribution to journal › Article › Research › peer-review
Published
Application of an improved testing device for the study of alumina dissolution in silicate slag
Burhanuddin, B., Guarco, J., Harmuth, H. & Vollmann, S., 2 Mar 2022, In: Journal of the European Ceramic Society. 42.2022, 8, p. 3652-3659 8 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Investigation of three-stage compressive creep of a spinel forming refractory castable containing 8% MgO
Akbari, B., Gruber, D., Jin, S. & Harmuth, H., 1 Feb 2022, In: Ceramics International : CI. 48.2022, 3, p. 3287-3292 6 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Significance of an inclined plane test for mould slag assessment
Marschall, I., Harmuth, H. & Kircher, V., Jan 2022, In: Metallurgia Italiana. 2022, 1, p. 14-22 9 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Application of Artificial Neural Network to Predict the Thermal and Thermomechanical Behavior of Refractory Linings
Hou, A., Jin, S., Gruber, D. & Harmuth, H., 2022, 2022 International Joint Conference on Neural Networks, IJCNN 2022 - Proceedings. Institute of Electrical and Electronics Engineers, (Proceedings of the International Joint Conference on Neural Networks; vol. 2022-July).
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
DETERMINATION OF SECONDARY CREEP STAGE PARAMETERS OF SHAPED ALUMINA SPINEL REFRACTORY WITH AID OF GENETIC ALGORITHM
Samadi, S., Jin, S., Gruber, D. & Harmuth, H., 2022.
Research output: Contribution to conference › Paper › peer-review
2021
Published
Significance of an inclined plane test for mould slag assessment
Marschall, I., Harmuth, H. & Kircher, V., 20 Oct 2021, Proceedings of the 10th European Conference on Continuous Casting. Mailand: Associazione Italiana di Metallurgia, 9 p. CC_017
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Significance of an inclined plane test for mould slag assessment
Marschall, I. & Harmuth, H., 20 Oct 2021.
Research output: Contribution to conference › Presentation › Research
Published
Application of liquid-liquid mass transfer for a steel ladle
Doletschek, M., Vollmann, S. & Harmuth, H., 6 Oct 2021, STEELSIM 2021, 9th International Conference on Modeling and Simulation of Metallurgical Processes in Steelmaking-STEELSIM2021. p. 8 8 p.
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Combined damaged elasticity and creep modeling of ceramics with wedge splitting tests
Samadi, S., Jin, S. & Harmuth, H., 15 Sept 2021, In: Ceramics International. 47.2021, 18, p. 25846-25853 8 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Phase formation in MgO-C refractories with different antioxidants
Atzenhofer, C. & Harmuth, H., 27 Aug 2021, In: Journal of the European Ceramic Society. 41.2021, 14, p. 7330-7338 9 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Asymmetric creep modeling of common refractory ceramics with high temperature wedge splitting test
Jin, S. & Harmuth, H., Jul 2021, In: Engineering Fracture Mechanics. 252.2021, July, 12 p., 107819.
Research output: Contribution to journal › Article › Research › peer-review
Published
Investigation of calcium-aluminate-based mold flux of different compositions
Marschall, I. & Harmuth, H., 10 Jun 2021, In: Steel research international. 93.2022, 3, 8 p., 2100187.
Research output: Contribution to journal › Article › Research › peer-review
Published
A comparison of two damage models for inverse identification of mode I fracture parameters: Case study of a refractory ceramic
Samadi, S., Jin, S., Gruber, D. & Harmuth, H., 1 May 2021, In: International Journal of Mechanical Sciences. 197, 1 May, 9 p., 106345.
Research output: Contribution to journal › Article › Research › peer-review
Published
Design, operation and evaluation of an improved refractory wear testing technique
Kircher, V., Burhanuddin & Harmuth, H., 17 Apr 2021, In: Measurement. 178.2021, June, 9 p., 109429.
Research output: Contribution to journal › Article › Research › peer-review
Published
Investigation of Calcium Aluminate based Mold Slag Compositions
Harmuth, H. & Marschall, I., 21 Feb 2021.
Research output: Contribution to conference › Presentation › Research
Published
Energy Consumption in Metal Powder Production
Dopler, M. & Weiß, C., 14 Jan 2021, In: Berg- und hüttenmännische Monatshefte : BHM. 166.2021, 1, p. 2-8 7 p.
Research output: Contribution to journal › Article › Research
2020
Published
METHOD AND DEVICE FOR PRODUCING MATERIAL POWDER
Dopler, M. & Weiß, C., 10 Dec 2020, IPC No. B22F9/08, Patent No. WO2020244948 (A1), Priority date 5 Jun 2019
Research output: Patent
Published
METHOD AND DEVICE FOR PRODUCING MATERIAL POWDER
Dopler, M. & Weiß, C., 9 Dec 2020, IPC No. B22F9/08, Patent No. EP3747574 (A1), Priority date 5 Jun 2019
Research output: Patent
Published
Creep Parameter Determination of a Shaped Alumina Spinel Refractory Using Statistical Analysis
Samadi, S., Teixeira, L., Jin, S., Gruber, D. & Harmuth, H., Sept 2020.
Research output: Contribution to conference › Paper
E-pub ahead of print
R-curves determination of ordinary refractory ceramics assisted by digital image correlation method
Dai, Y., Harmuth, H., Jin, S., Gruber, D. & Yawei, L., 20 May 2020, (E-pub ahead of print) In: Journal of the European Ceramic Society. 40.2020, 13, p. 4655-4663 9 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Solid state recycling of aluminum alloy chips via pulsed electric current sintering
Cislo, C. N., Kronthaler, B., Buchmayr, B. & Weiß, C., 10 Mar 2020, In: Journal of Manufacturing and Materials Processing. 4.2020, 1, 19 p., 4010023.
Research output: Contribution to journal › Article › Research › peer-review
Published
Statistical study of compressive creep parameters of an alumina spinel refractory
Samadi, S., Jin, S., Gruber, D., Harmuth, H. & Schachner, S., 1 Mar 2020, In: Ceramics International : CI. 46.2020, 10A, p. 14662-14668 7 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Mechanical and fracture investigation of magnesia refractories with acoustic emission-based method
Dai, Y., Yawei, L., Jin, S., Harmuth, H., Yan, W. & Xu, X., Jan 2020, In: Journal of the European Ceramic Society. 40.2020, 1, p. 181-191 11 p.
Research output: Contribution to journal › Article › Research › peer-review
2019
Published
Fracture behaviour of magnesia refractory materials in tension with the Brazilian test
Dai, Y., Li, Y., Xu, X., zhu, Q., Yan, W., Jin, S. & Harmuth, H., Dec 2019, In: Journal of the European Ceramic Society. 39.2019, 16, p. 5433-5441 9 p.
Research output: Contribution to journal › Article › Research › peer-review

Previous 1 2 3 4 5 6 7 8 Next

Research Portal

Research output

Advanced filters