Application of BaO-Based Sulfur Sorbent for in Situ Desulfurization of Biomass-Derived Syngas

Research output: Contribution to journalArticleResearchpeer-review

Standard

Application of BaO-Based Sulfur Sorbent for in Situ Desulfurization of Biomass-Derived Syngas. / Husmann, M.; Müller, Michael; Zuber, Christian et al.
In: Energy & fuels, Vol. 30.2013, No. July 11, 2016, p. 6458–6466.

Research output: Contribution to journalArticleResearchpeer-review

Harvard

Husmann, M, Müller, M, Zuber, C, Kienberger, T, Maitz, V & Hochenauer, C 2016, 'Application of BaO-Based Sulfur Sorbent for in Situ Desulfurization of Biomass-Derived Syngas', Energy & fuels, vol. 30.2013, no. July 11, pp. 6458–6466. https://doi.org/10.1021/acs.energyfuels.6b00957

Vancouver

Husmann M, Müller M, Zuber C, Kienberger T, Maitz V, Hochenauer C. Application of BaO-Based Sulfur Sorbent for in Situ Desulfurization of Biomass-Derived Syngas. Energy & fuels. 2016;30.2013(July 11):6458–6466. doi: 10.1021/acs.energyfuels.6b00957

Author

Husmann, M. ; Müller, Michael ; Zuber, Christian et al. / Application of BaO-Based Sulfur Sorbent for in Situ Desulfurization of Biomass-Derived Syngas. In: Energy & fuels. 2016 ; Vol. 30.2013, No. July 11. pp. 6458–6466.

Bibtex - Download

@article{a27dacb0d6ca467483709e04c80917a9,
title = "Application of BaO-Based Sulfur Sorbent for in Situ Desulfurization of Biomass-Derived Syngas",
abstract = "A novel BaO-based sorbent is tested for in situ application as desulfurization agent in an allothermal biomass gasification process. BaO is stabilized against the formation of carbonate and thus theoretically allows desulfurization down to a few parts per million (volume) (ppmv) H2S even for high-steam and high-temperature conditions. In real process application, sintering of the sorbent occurred and had to be prevented by the addition of lime as separating agent. Additionally, a kinetic limitation of the desulfurization with BaO was shown for the in-bed sorption of sulfur. An increase of gasification temperature from 760 to 810 °C significantly improved the desulfurization performance. The observed behavior is in contrast to that of previously tested CaO-based in situ sorbents. CaO-based in situ desulfurization is limited to values of about 500 ppmv H2S for the conditions prevailing in the gasifier. With the novel BaO-based sorbent, a desulfurization from 85 to 35 ppmv residual H2S is shown upon addition of the sorbent to the gasifier. In experiments with a combined desulfurization of CaO and BaO, a release of H2S from CaS was shown once the H2S content in the gas drops below the CaO-based steady-state equilibrium of desulfurization. Particle analysis via SEM-EDX, XRD, ICP-OES, and BET complement the results of in situ desulfurization. SEM-EDX results indicate the stabilization of BaO in sintering bridges and a certain depletion of barium from the sorbent after in-bed application.",
author = "M. Husmann and Michael M{\"u}ller and Christian Zuber and Thomas Kienberger and Viktoria Maitz and Christoph Hochenauer",
year = "2016",
doi = "10.1021/acs.energyfuels.6b00957",
language = "English",
volume = "30.2013",
pages = "6458–6466",
journal = "Energy & fuels",
issn = "0887-0624",
publisher = "American Chemical Society",
number = "July 11",

}

RIS (suitable for import to EndNote) - Download

TY - JOUR

T1 - Application of BaO-Based Sulfur Sorbent for in Situ Desulfurization of Biomass-Derived Syngas

AU - Husmann, M.

AU - Müller, Michael

AU - Zuber, Christian

AU - Kienberger, Thomas

AU - Maitz, Viktoria

AU - Hochenauer, Christoph

PY - 2016

Y1 - 2016

N2 - A novel BaO-based sorbent is tested for in situ application as desulfurization agent in an allothermal biomass gasification process. BaO is stabilized against the formation of carbonate and thus theoretically allows desulfurization down to a few parts per million (volume) (ppmv) H2S even for high-steam and high-temperature conditions. In real process application, sintering of the sorbent occurred and had to be prevented by the addition of lime as separating agent. Additionally, a kinetic limitation of the desulfurization with BaO was shown for the in-bed sorption of sulfur. An increase of gasification temperature from 760 to 810 °C significantly improved the desulfurization performance. The observed behavior is in contrast to that of previously tested CaO-based in situ sorbents. CaO-based in situ desulfurization is limited to values of about 500 ppmv H2S for the conditions prevailing in the gasifier. With the novel BaO-based sorbent, a desulfurization from 85 to 35 ppmv residual H2S is shown upon addition of the sorbent to the gasifier. In experiments with a combined desulfurization of CaO and BaO, a release of H2S from CaS was shown once the H2S content in the gas drops below the CaO-based steady-state equilibrium of desulfurization. Particle analysis via SEM-EDX, XRD, ICP-OES, and BET complement the results of in situ desulfurization. SEM-EDX results indicate the stabilization of BaO in sintering bridges and a certain depletion of barium from the sorbent after in-bed application.

AB - A novel BaO-based sorbent is tested for in situ application as desulfurization agent in an allothermal biomass gasification process. BaO is stabilized against the formation of carbonate and thus theoretically allows desulfurization down to a few parts per million (volume) (ppmv) H2S even for high-steam and high-temperature conditions. In real process application, sintering of the sorbent occurred and had to be prevented by the addition of lime as separating agent. Additionally, a kinetic limitation of the desulfurization with BaO was shown for the in-bed sorption of sulfur. An increase of gasification temperature from 760 to 810 °C significantly improved the desulfurization performance. The observed behavior is in contrast to that of previously tested CaO-based in situ sorbents. CaO-based in situ desulfurization is limited to values of about 500 ppmv H2S for the conditions prevailing in the gasifier. With the novel BaO-based sorbent, a desulfurization from 85 to 35 ppmv residual H2S is shown upon addition of the sorbent to the gasifier. In experiments with a combined desulfurization of CaO and BaO, a release of H2S from CaS was shown once the H2S content in the gas drops below the CaO-based steady-state equilibrium of desulfurization. Particle analysis via SEM-EDX, XRD, ICP-OES, and BET complement the results of in situ desulfurization. SEM-EDX results indicate the stabilization of BaO in sintering bridges and a certain depletion of barium from the sorbent after in-bed application.

U2 - 10.1021/acs.energyfuels.6b00957

DO - 10.1021/acs.energyfuels.6b00957

M3 - Article

VL - 30.2013

SP - 6458

EP - 6466

JO - Energy & fuels

JF - Energy & fuels

SN - 0887-0624

IS - July 11

ER -