Zoltan Major

(Former)

1 - 121 out of 121Page size: 500

Research output

  1. 2014
  2. Published

    Cyclic loading of polyetheretherketone at high tensile stress levels

    Berer, M., Major, Z., Pinter, G., Constantinescu, D. M. & Marsavina, L., 2014, Experimental Stress Analysis and Materials 14. Trans Tech Publications, p. 12-16 5 p. (Key Engineering Materials; vol. 601).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  3. Published

    Investigation of the dynamic mechanical behavior of Polyetheretherketone (PEEK) in the high stress tensile regime

    Berer, M., Major, Z., Pinter, G., Constantinescu, D. M. & Marsavina, L., 2014, In: Mechanics of time-dependent materials. 18, p. 663-684

    Research output: Contribution to journal › Article › Research › peer-review

  4. 2013
  5. Published

    Elevated Pitting Wear of injection molded PEEK rolls

    Berer, M., Major, Z. & Pinter, G., 2013, In: Wear. 297, p. 1052-1063

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    PCB drop test lifetime assessment based on simulations and cyclic bend tests

    Fuchs, P., Pinter, G. & Major, Z., 2013, In: Microelectronics Reliability. 53, p. 774-781

    Research output: Contribution to journal › Article › Research › peer-review

  7. 2012
  8. Published

    Temperature dependent fracture behavior of Rubbers used in the oil and gas industry

    Schrittesser, B., Pinter, G. & Major, Z., 2012, 19th European Conference on Fracture: Fracture Mechanics for Durability, Reliability and Safety, ECF 2012. (19th European Conference on Fracture: Fracture Mechanics for Durability, Reliability and Safety, ECF 2012).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  9. 2011
  10. Published

    Development of an instrumented autoclave for rapid gas decompression experiments

    Major, Z., Schrittesser, B. & Pinter, G., 2011, Tagung „Innovation Messtechnik“. p. 1-2

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  11. Published

    Irreversible deformation of isotactic polypropylene in the pre-yield regime

    Tscharnuter, D., Jerabek, M., Major, Z. & Pinter, G., 2011, In: European polymer journal. 47, p. 989-996

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    On the determination of the relaxation modulus of PP compounds from arbitrary strain histories

    Tscharnuter, D., Jerabek, M., Major, Z. & Lang, R., 2011, In: Mechanics of time-dependent materials. 15, 1, p. 01-14

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Time-dependent poisson’s ratio of polypropylene compounds for various strain histories

    Tscharnuter, D., Jerabek, M., Major, Z. & Lang, R., 2011, In: Mechanics of time-dependent materials. 15, 1, p. 15-28

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Uniaxial nonlinear viscoelastic viscoplastic modeling of polypropylene

    Tscharnuter, D., Jerabek, M., Major, Z. & Pinter, G., 2011, In: Mechanics of time-dependent materials. 16, 3, p. 1-12

    Research output: Contribution to journal › Article › Research › peer-review

  15. 2010
  16. Published

    Characterization of the fracture and fatigue behavior of thermoplastic elastomer materials

    Major, Z., Isasi, M. & Schwarz, T., 2010, Key engineering materials. p. 789-792 (Key engineering materials).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  17. Published

    Characterization of the fracture behavior of NBR and FKM grade elastomers for oilfield applications

    Major, Z. & Lang, R., 2010, In: Engineering Failure Analysis. p. 701-711

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Characterization of the global deformation behaviour of engineering plastics rolls

    Berer, M. & Major, Z., 2010, In: International journal of mechanics and materials in design. p. 1-9

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Cyclic bend tests for the reliability evaluation of printed circuit boards under dynamic loads

    Fuchs, P. & Major, Z., 2010, In: Frattura ed Integrità Strutturale . 15, January, p. 64-73

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Experimental Definition of a Failure Model for the Tribological Behavior of PTFE Bronze Compounds

    Godor, I., Major, Z., Grün, F. & Vezer, S., 2010, In: Journal of tribology (Transactions of the ASME). p. 807-815

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    Experimental Determination of Cohesive Zone Models for Epoxy Composites

    Fuchs, P. & Major, Z., 2010, In: Experimental mechanics. 51, 5, p. 1-8

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Filler/matrix-debonding and micro-mechanisms of deformation in particulate filled polypropylene composites under tension

    Jerabek, M., Major, Z., Renner, K., Moczo, J., Pukanszky, B. & Lang, R., 2010, In: Polymer. p. 2040-2048

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Implementation of an In-Situ Constrained Test Set Up for Rapid Gas Decompression Failure Analysis

    Schrittesser, B., Major, Z., Olah, L. & Schwarz, T., 2010, Proceedings of 9th Fall Rubber Colloquium. p. 295-297

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  24. Published

    Method development for the reliability testing of printed circuit boards under dynamic loads

    Major, Z. & Fuchs, P. F., 2010.

    Research output: Contribution to conference › Poster › Research › peer-review

  25. Published

    Strain determination of polymeric materials using digital image correlation

    Jerabek, M., Major, Z. & Lang, R., 2010, In: Polymer Testing. p. 407-416

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    Tribological behaviour of unfilled and filled TPU materials

    Godor, I., Schiffer, J., Grün, F., Schwarz, T. & Major, Z., 2010, 14th Nordic Symposium on Tribology - Abstracts. p. 59-59

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  27. Published

    Tribologische Funktionsweise von ungefüllten und gefüllten TPU-Dichtungsmaterialien - ein Erfahrungsbericht

    Godor, I., Schiffer, J., Major, Z., Grün, F. & Schwarz, T., 2010, In: Tribologie und Schmierungstechnik. 57, p. 21-27

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    Uniaxial compression testing of polymeric materials

    Jerabek, M., Major, Z. & Lang, R., 2010, In: Polymer Testing. p. 302-309

    Research output: Contribution to journal › Article › Research › peer-review

  29. 2009
  30. Published

    Characterization and simulation of the micromechanical behaviour of particulate filled polypropylene compounds under creep loading

    Gastl, S., Jerabek, M., Major, Z. & Lang, R., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  31. Published

    Characterization of the dynamic mechanical behavior of Polydimethylsiloxane based magneto elastomer

    Schrittesser, B., Major, Z. & Filipcsei, G., 2009, In: Journal of physics / Conference series. p. 1088-1092

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    Determination of material parameters for hyperelastic material models for two elastomer grades

    Major, Z. & Pinter, G., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  33. Published

    Einige Gesetzmäßigkeiten über das tribologische Verhalten von ungefüllten und gefüllten TPU-Materialien

    Godor, I., Schiffer, J., Grün, F., Major, Z. & Schwarz, T., 2009, Tribologie Fachtagung 2009: Reibung, Schmierung und Verschleiß - Forschung und praktische Anwendungen. p. 1-12

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  34. Published

    Experimental definition of a failure model for the tribological behaviour of polytetrafluorethylene bronze compounds

    Godor, I., Major, Z., Vezér, S. & Grün, F., 2009, In: Proceedings of the Institution of Mechanical Engineers. Part J, Journal of engineering tribology. 223, p. 807-815

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Filler/matrix-debonding and micro-mechanisms of deformation in particulate filled pp composites under tension

    Jerabek, M., Major, Z. & Lang, R., 2009, Euro Fillers 2009. p. 18-22

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  36. Published

    Influence of the microstructure on the tribological properties of TPU seal materials

    Godor, I., Grün, F., Major, Z., Hausberger, A. & Schwarz, T., 2009, Proceedings of European Polymer Congress, 2009. p. 197-197

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  37. 2008
  38. Published

    Analog triggered image acqusition method for optical measurement under cyclic load conditions

    Vezer, S. T. & Major, Z., 2008, In: Materials engineering. 15, 1, p. 5-13

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    Characterisation of the failure behavior of elastomer composites

    Major, Z., Kajtna, A., Kovacevic, Z., Mesec, A. & Kosir, M., 2008, ASPM 2008. p. 55-55

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  40. Published

    Characterisation of the fracture behavior of NBR and FKM grade elastomers for oilfield applications

    Major, Z. & Lang, R., 2008, Multilevel Approach to Fracture of Materials, Components and Structures. p. 228-228

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  41. Published

    Characterization of the Fracture and Fatigue Behavior of Elastomer Composites

    Major, Z. & Lang, R., 2008, EUROMECH Colloquium 502. p. 71-74

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  42. Published

    Characterization of the impact tensile behavior of glass fibre reinforced polyamide (PA-GF) Materials

    Major, Z. & Lang, R., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  43. Published

    Characterization of the magnetorheologica behavior of elastomers

    Schrittesser, B., Major, Z. & Filipcsei, G., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  44. Published

    Characterization of the magnetorheological behavior of fluids and elastomeers

    Major, Z., Filipcsei, G. & Zrinyi, M., 2008, ASPM 2008. p. 41-41

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  45. Published

    Characterization of the tensile behavior of glass fiber reinforced polyamide materials (PA-LGF) at high loading rates

    Major, Z. & Lang, R., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  46. Published

    Deformation Analysis Of Impact Loaded Composites

    Fuchs, P., Major, Z. & Lang, R., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  47. Published

    Development an implementation of a novel tribological test method and characterisation of TPU materials

    Hausberger, A., Bruckmoser, K. & Major, Z., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  48. Published

    Development an implementation of a novel tribological test method and characterization of TPU materials

    Hausberger, A., Bruckmoser, K. & Major, Z., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  49. Published

    Development of an in plane biaxial test setup for monotonic and cyclic tests

    Vezer, S. & Major, Z., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  50. Published

    Development of fretting fatigue test system

    Vezer, S. & Major, Z., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  51. Published

    Fracture analysis of annealed PVDF films

    Wallner, G., Major, Z., Maier, G. & Lang, R., 2008, In: Polymer Testing. 27, p. 392-402

    Research output: Contribution to journal › Article › Research › peer-review

  52. Published

    Friction Behaviour of Unfilled and Filled TPU

    Godor, I., Major, Z., Hausberger, A. & Schiffer, J., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  53. Published

    Fricton behavior of unfilled and filled thermoplastic polyurethane materials

    Godor, I., Grün, F. & Major, Z., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  54. Published

    Poission's ratio of polypropylen in relaxation, creep and monotinic tensile tests

    Tscharnuter, D., Jerabek, M. & Major, Z., 2008, Mechanics of time Dependent Materials Conference. p. 1-14

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  55. Published

    Tribological and material properties of PTFE-Bz-Compounds - Do the correspond?

    Godor, I., Grün, F., Major, Z., Vezer, S. & Leitgeb, A., 2008, 13th Nordic Symposium on Tribology. p. 1-14

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  56. 2007
  57. Published

    Analog triggered image acquisation for optical measurement under cyclic load conditions

    Vezer, S., Steinberger, R. & Major, Z., 2007.

    Research output: Contribution to conference › Poster › Research › peer-review

  58. Published

    Analog triggered image acquisation for optical measurment under cyclic load conditions

    Vezer, S., Steinberger, R. & Major, Z., 2007.

    Research output: Contribution to conference › Poster › Research › peer-review

  59. Published

    Application of full-field strain and temperature measurement and analysis to polymer testing

    Major, Z., Steinberger, R., Feichter, C., Jerabek, M. & Lang, R., 2007, Experimental Analysis of Nano and Engineering Materials and Structures. p. 473-474

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  60. Published

    Characterisation and simulation of the time dependent deformation behaviour of polymer roller

    Berer, M. & Major, Z., 2007.

    Research output: Contribution to conference › Poster › Research › peer-review

  61. Published

    Characterisation, modelling and simulation of the impact behavior of foams

    Reiter, M., Knotz, C. & Major, Z., 2007.

    Research output: Contribution to conference › Poster › Research › peer-review

  62. Published

    Characterisation of the fatigue behavior of elastomer composites

    Kajtna, A., Vezer, S. & Major, Z., 2007.

    Research output: Contribution to conference › Poster › Research › peer-review

  63. Published

    Characterisation of the fatigue behavior of rubber by combined Wöhler on isocyclic analysis

    Vezer, S. & Major, Z., 2007.

    Research output: Contribution to conference › Poster › Research › peer-review

  64. Published

    Characterisation of the fatigue behavior of short glass fiber reinforced polymers

    Guster, C., Pinter, G., Major, Z., Eichlseder, W. & Lang, R., 2007.

    Research output: Contribution to conference › Poster › Research › peer-review

  65. Published

    Characterisation of the fatigue behavior of short glass fiber reinforced polymers

    Guster, C., Pinter, G., Major, Z., Eichlseder, W. & Lang, R., 2007.

    Research output: Contribution to conference › Poster › Research › peer-review

  66. Published

    Characterisation of the fatigue behavior of short glass fiber reinforced polymers

    Guster, C., Pinter, G., Major, Z., Eichlseder, W. & Lang, R., 2007, Polymeric Materials in Automotove PMA. p. 47-49

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  67. Published

    Characterisation of the fatigue failure behavior of elastomer composites

    Kajtna, A., Vezer, S. & Major, Z., 2007.

    Research output: Contribution to conference › Poster › Research › peer-review

  68. Published

    Characterisation of the fracture behavior of elastomeres under complex loading conditions

    Major, Z., Lederer, K. & Lang, R., 2007, Experimental Analysis of Nano and Engineering Materials and Structures. p. 223-224

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  69. Published

    Characterisation of the friction behavior of table tennis rubbers

    Major, Z. & Lang, R., 2007, International Table Tennis Federation. p. 123-130

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  70. Published

    Characterisation of the magnetorheological behavior of fluids and elastomers

    Major, Z. & Filipcsei, G., 2007.

    Research output: Contribution to conference › Poster › Research › peer-review

  71. Published

    Characterisation of thermo-mechanical behavior of elastomers

    Major, Z., Feichter, C. & Steinberger, R., 2007.

    Research output: Contribution to conference › Poster › Research › peer-review

  72. Published

    Determination of time dependent Poisson's ratio values in monotonic and creep tensile experiments

    Steinberger, R., Jerabek, M., Major, Z. & Lang, R., 2007.

    Research output: Contribution to conference › Poster › Research › peer-review

  73. Published

    Development of a compression tool for polymeric materials

    Jerabek, M., Steinberger, R. & Major, Z., 2007, Experimental Analysis of Nano and Engineering Materials and Structures. p. 471-472

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  74. Published

    Experimental determination of fatigue crack growth behavior and surface strain distribution of 'faint waist pure shear' specimens with different crack tip radii

    Feichter, C., Major, Z. & Lang, R., 2007, In: Rubber chemistry and technology. 79, p. 712-733

    Research output: Contribution to journal › Article › Research › peer-review

  75. Published

    Influence of glass bead and talc fillers on the time and temperature dependent tensile behavior of polypropylene compounds

    Jerabek, M., Steinberger, R. & Major, Z., 2007, ATEM 2007. p. 0-0

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  76. Published

    Literaturrecherche zu viskoelastischen Flüssigkeiten für neuartige Dämpfungselemente

    Major, Z. & Lang, R., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  77. Published

    Mechanische und schadensanalytische Untersuchungen an Wabenkern-Bauteilen

    Major, Z. & Lang, R., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  78. Published

    Method for measuring biaxial deformation on rubber and polypropylene specimens

    Feichter, C., Jerabek, M., Major, Z. & Lang, R., 2007, Experimental Analysis of Nano and Engineering Materials and Structures. p. 273-274

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  79. Published

    Neue Erkenntnisse des tribologischen Verhaltens dreier TPU-Dichtungswerkstoffe

    Godor, I., Grün, F. & Major, Z., 2007, Reliability Engineering - Simulation und Monitoring von verschleißgefährdeten Systemen. p. 63-73

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  80. Published

    Qualitatives und quantitatives Verständnis des Walzkontaktes

    Major, Z. & Lang, R., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  81. Published

    Schadensanalytische Untersuchungen an Kunststoff-Rollen im Walzkontakt

    Major, Z. & Lang, R., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  82. Published

    Small strain test system for optical strain measurement systems

    Steinberger, R., Jerabek, M., Major, Z. & Lang, R., 2007, Experimental Analysis of Nano and Engineering Materials and Structures. p. 393-394

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  83. Published

    Testing of rail parts according ST 120/20a - AREA in case of heavy load application

    Major, Z. & Lang, R., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  84. Published

    Volume strain measurements of particle-filled polypropylene compounds

    Jerabek, M. & Major, Z., 2007, Eurofillers. p. 0-0

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  85. 2006
  86. Published

    Ableitung eines Funktions-/Schädigungsmodells über den tribologischen Verhalten von PTFE-Bz-Composits

    Godor, I., Major, Z. & Vezér, S., 2006, Ableitung eines Funktions-/Schädigungsmodells über den tribologischen Verhalten von PTFE-Bz-Composits. p. 38/1-38/10

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  87. Published

    Bestimmung von Werkstoffkennwerten zur FE-Simulation

    Major, Z. & Lang, R., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  88. Published

    Characterisation of delamination crack growth between elastomer cross-ply fabrics

    Vezer, S., Major, Z. & Godor, I., 2006.

    Research output: Contribution to conference › Poster › Research › peer-review

  89. Published

    Characterisation of the Fatigue Behavior of Elastomer Composites

    Major, Z., Kovacevic, Z., Kosir, M., Mesec, A. & Lang, R., 2006, 5th International Conference on Mechanics and Materials in Design. INEGI-Instituto de Engenharia Mecânica e Gestão Industrial, p. 391-392

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  90. Published

    Characterisation of the fatigue behavior of elastomers and elastomer Composite

    Major, Z., Feichter, C., Kovacevic, Z. & Lang, R., 2006, 1. Leobner Betriebsfestigkeitstage 2006. Montanuniversität Leoben, Lehrstuhl für Allgemeinen Maschinenbau, p. 265-277

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  91. Published

    Characterization of the Mechanical Behavior of Polyetheretherketone (PEEK)

    Major, Z. & Lang, R., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  92. Published

    Comparison between time-independent FE-Simulation and measurements for two types of rubber

    Feichter, C., Major, Z. & Lang, R., 2006, 5th International Conference on Mechanics and Materials in Design. INEGI-Instituto de Engenharia Mecânica e Gestão Industrial, p. 523-524

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  93. Published

    Deformation analysis of notched rubber specimens

    Feichter, C., Major, Z. & Lang, R., 2006, In: Strain. p. 299-304

    Research output: Contribution to journal › Article › Research › peer-review

  94. Published

    Development of a test and fatigue analysis methodology for elastomeric seals exposed to explosive decompression

    Major, Z., Lederer, K., Moitzi, M., Mitterhuber, M., Schwarz, T. & Lang, R., 2006, Development of a test and fatigue analysis methodology for elastomeric seals exposed to explosive decompression. p. 1-18

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  95. Published

    Influence of Annealing on the Fracture Behavior of 200 µm Thick a-PVDF Films

    Wallner, G., Major, Z., Maier, G. & Lang, R., 2006, In: Advanced engineering materials. 8, p. 1140-1145

    Research output: Contribution to journal › Article › Research › peer-review

  96. Published

    Prüfungs- und Versagensanalyse für die explosive Dekompression elastomerer Dichtungen

    Major, Z., Lederer, K., Moitzi, M., Mitterhuber, M., Schwarz, T. & Lang, R., 2006, In: GAK : Gummi, Fasern, Kunststoffe. p. 685-694

    Research output: Contribution to journal › Article › Research › peer-review

  97. Published

    Special topics of polymer science and advanced characterization methods - WP Report "Elektronenmikroskopie"

    Wallner, G. & Major, Z., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  98. Published

    Special topics of polymer science and advanced characterization methods - WP Report "Nanoindentation"

    Wallner, G. & Major, Z., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  99. Published

    Test and failure analyses methodology for elastomeric seals exposed to explosive decompression

    Major, Z., Lederer, K., Moitzi, M., Mitterhuber, M., Schwarz, T. & Lang, R., 2006, In: Rubber, fibres, plastics international. p. 93-100

    Research output: Contribution to journal › Article › Research › peer-review

  100. Published

    The Test Frequency dependence of the fatigue behavior of elastomers

    Major, Z., Feichter, C., Steinberger, R. & Lang, R., 2006, Fracture of Nano and Engineering Materials. Springer, p. 777-784

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  101. Published

    The tribological behavior of PTFE and PTFE compounds

    Vezer, S., Major, Z. & Godor, I., 2006.

    Research output: Contribution to conference › Poster › Research › peer-review

  102. Published

    Tribologisches Werkstoffverhalten von Thermoplastischen Polyurethan Dichtungswerkstoffen

    Godor, I., Major, Z. & Grün, F., 2006, Tribologisches Werkstoffverhalten von Thermoplastischen Polyurethan Dichtungswerkstoffen. p. 57-64

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  103. 2005
  104. Published

    Application of full-field strain and temperature measurement and analysis to polymer testing

    Major, Z., Steinberger, R., Feichter, C. & Friebe, H., 2005.

    Research output: Contribution to conference › Poster › Research › peer-review

  105. Published

    Brittle and ductile failure behavior of PE pipe grades

    Pinter, G., Major, Z., Haager, M. J. & Lang, R., 2005.

    Research output: Contribution to conference › Poster › Research › peer-review

  106. Published

    Characterisation of the compression behavior of engineering polymers

    Jerabek, M., Steinberger, R. & Major, Z., 2005.

    Research output: Contribution to conference › Poster › Research › peer-review

  107. Published

    Characterization of the failure behavior of elastomers by fracture mechanics methods

    Major, Z., Balika, W., Feichter, C., Steinberger, R. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  108. Published

    Characterization of the tribological behavior of engineering polymers, Part I: PTFE and PTFE Compounds

    Major, Z., Godor, I., Resch, K., Vezer, S. & Müller, J., 2005.

    Research output: Contribution to conference › Poster › Research › peer-review

  109. Published

    Determination of "True Stress vs. True Strain" Data for Thin Molybdenum Sheets

    Major, Z. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  110. Published

    Development and implementation of a video extensometer system

    Fauster, E., Steinberger, R. & Major, Z., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  111. Published

    Development and implementation of non-contact strain and deformation test methods for polymeric materials and components

    Fauster, E., Steinberger, R., Major, Z., O'Leary, P. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  112. Published

    Development and implementation of non-contact strain and deformation test methods for polymeric materials and components - Thermography

    Steinberger, R. & Major, Z., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  113. Published

    Development of fatigue test methods for elastomers - Standard and complex methods

    Feichter, C., Major, Z. & Lang, R., 2005.

    Research output: Contribution to conference › Poster › Research › peer-review

  114. Published

    Fracture surface anaylsis

    Major, Z., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  115. Published

    Influence of crack tip sharpness and radius on the strain distribution in rubbers analyzed by finite element simulation and experiments

    Feichter, C., Major, Z. & Lang, R., 2005, In: VLK-News. p. 6-12

    Research output: Contribution to journal › Article › Research › peer-review

  116. Published

    Influence of crack tip sharpness and radius on the strain distribution in rubbers analyzed by finite element simulation experiments

    Feichter, C., Major, Z. & Lang, R., 2005, European Conference on Constitutive Models for Rubber IV (ECCMR 2005). Balkema, p. 89-95

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  117. Published

    Instrumentierte Impactversuche an Rohren aus Polypropylen in Anlehnung an EN 744

    Major, Z. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  118. Published

    Investigations on a crack containing elastomer/metal component

    Major, Z. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  119. Published

    Literature review on the field of elastomer fracture and fatigue

    Feichter, C. & Major, Z., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  120. Published

    Measurement and test system development. (A) Development of and optical crack length measurement system and (B) Measurement of the adiabatic and hysteretic heating by a thermography system

    Steinberger, R. & Major, Z., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  121. Published

    Non-contact full-field strain analysis

    Steinberger, R., Feichter, C. & Major, Z., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  122. Published

    Non-Destructive material and component testing

    Fauster, E., Steinberger, R. & Major, Z., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  123. Published

    Ranking of PE pipe grades by their failure behavior under impact loads

    Pinter, G., Major, Z., Haager, M. J. & Lang, R., 2005, ANTEC. p. 3551-3555

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  124. Published

    Test method development. Applicability and limitations of J integral concept to elastomer fracture

    Major, Z., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  125. Published

    Test method development. Applicability and limitations of tearing energy concept to elastomer fracture and fatigue

    Feichter, C. & Major, Z., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  126. Published

    Test method development based on linear elastic fracture mechanics concept

    Balika, W. & Major, Z., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  127. Published

    Untersuchungen an Nutverschlusskeilen

    Major, Z. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  128. 2004
  129. Published

    Characterizsation of Table Tennis Racket Sandwich Rubbers

    Major, Z. & Lang, R., 2004, 8th Internationale Table Tennis Federation Sports Science Congress and the 3rd Qorld Congress of Science and Racket Sports. p. 146-151

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  130. Published

    Rate dependent fracture of polymers - applicability and limitation of force based fracture mechanics approaches

    Major, Z. & Lang, R., 2004, The Application of Fracture Mechanics to Polymers, Adhesvies and Composites. p. 39-46

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  131. Published

    Some contributions to the characterization of the development of transfer film for PTFE Compounds

    Major, Z., Godor, I. & Resch, K., 2004, Reibung und Verschleiß im Spannungsfeld von Fahrzeugherstellern und deren Kunden. p. 221-226

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  132. 2002
  133. Published

    Impact fracture toughness of polymers

    Major, Z. & Lang, R., 2002, In: VLK-News. p. 9-12

    Research output: Contribution to journal › Article › Research › peer-review

View graph of relations

Latest Research Output

View more (121)