Zoltan Major

(Former)

1 - 50 out of 121Page size: 50

Research output

  1. 2014
  2. Published

    Cyclic loading of polyetheretherketone at high tensile stress levels

    Berer, M., Major, Z., Pinter, G., Constantinescu, D. M. & Marsavina, L., 2014, Experimental Stress Analysis and Materials 14. Trans Tech Publications, p. 12-16 5 p. (Key Engineering Materials; vol. 601).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  3. Published

    Investigation of the dynamic mechanical behavior of Polyetheretherketone (PEEK) in the high stress tensile regime

    Berer, M., Major, Z., Pinter, G., Constantinescu, D. M. & Marsavina, L., 2014, In: Mechanics of time-dependent materials. 18, p. 663-684

    Research output: Contribution to journal › Article › Research › peer-review

  4. 2013
  5. Published

    Elevated Pitting Wear of injection molded PEEK rolls

    Berer, M., Major, Z. & Pinter, G., 2013, In: Wear. 297, p. 1052-1063

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    PCB drop test lifetime assessment based on simulations and cyclic bend tests

    Fuchs, P., Pinter, G. & Major, Z., 2013, In: Microelectronics Reliability. 53, p. 774-781

    Research output: Contribution to journal › Article › Research › peer-review

  7. 2012
  8. Published

    Temperature dependent fracture behavior of Rubbers used in the oil and gas industry

    Schrittesser, B., Pinter, G. & Major, Z., 2012, 19th European Conference on Fracture: Fracture Mechanics for Durability, Reliability and Safety, ECF 2012. (19th European Conference on Fracture: Fracture Mechanics for Durability, Reliability and Safety, ECF 2012).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  9. 2011
  10. Published

    Development of an instrumented autoclave for rapid gas decompression experiments

    Major, Z., Schrittesser, B. & Pinter, G., 2011, Tagung „Innovation Messtechnik“. p. 1-2

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  11. Published

    Irreversible deformation of isotactic polypropylene in the pre-yield regime

    Tscharnuter, D., Jerabek, M., Major, Z. & Pinter, G., 2011, In: European polymer journal. 47, p. 989-996

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    On the determination of the relaxation modulus of PP compounds from arbitrary strain histories

    Tscharnuter, D., Jerabek, M., Major, Z. & Lang, R., 2011, In: Mechanics of time-dependent materials. 15, 1, p. 01-14

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Time-dependent poisson’s ratio of polypropylene compounds for various strain histories

    Tscharnuter, D., Jerabek, M., Major, Z. & Lang, R., 2011, In: Mechanics of time-dependent materials. 15, 1, p. 15-28

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Uniaxial nonlinear viscoelastic viscoplastic modeling of polypropylene

    Tscharnuter, D., Jerabek, M., Major, Z. & Pinter, G., 2011, In: Mechanics of time-dependent materials. 16, 3, p. 1-12

    Research output: Contribution to journal › Article › Research › peer-review

  15. 2010
  16. Published

    Characterization of the fracture and fatigue behavior of thermoplastic elastomer materials

    Major, Z., Isasi, M. & Schwarz, T., 2010, Key engineering materials. p. 789-792 (Key engineering materials).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  17. Published

    Characterization of the fracture behavior of NBR and FKM grade elastomers for oilfield applications

    Major, Z. & Lang, R., 2010, In: Engineering Failure Analysis. p. 701-711

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Characterization of the global deformation behaviour of engineering plastics rolls

    Berer, M. & Major, Z., 2010, In: International journal of mechanics and materials in design. p. 1-9

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Cyclic bend tests for the reliability evaluation of printed circuit boards under dynamic loads

    Fuchs, P. & Major, Z., 2010, In: Frattura ed Integrità Strutturale . 15, January, p. 64-73

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Experimental Definition of a Failure Model for the Tribological Behavior of PTFE Bronze Compounds

    Godor, I., Major, Z., Grün, F. & Vezer, S., 2010, In: Journal of tribology (Transactions of the ASME). p. 807-815

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    Experimental Determination of Cohesive Zone Models for Epoxy Composites

    Fuchs, P. & Major, Z., 2010, In: Experimental mechanics. 51, 5, p. 1-8

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Filler/matrix-debonding and micro-mechanisms of deformation in particulate filled polypropylene composites under tension

    Jerabek, M., Major, Z., Renner, K., Moczo, J., Pukanszky, B. & Lang, R., 2010, In: Polymer. p. 2040-2048

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Implementation of an In-Situ Constrained Test Set Up for Rapid Gas Decompression Failure Analysis

    Schrittesser, B., Major, Z., Olah, L. & Schwarz, T., 2010, Proceedings of 9th Fall Rubber Colloquium. p. 295-297

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  24. Published

    Method development for the reliability testing of printed circuit boards under dynamic loads

    Major, Z. & Fuchs, P. F., 2010.

    Research output: Contribution to conference › Poster › Research › peer-review

  25. Published

    Strain determination of polymeric materials using digital image correlation

    Jerabek, M., Major, Z. & Lang, R., 2010, In: Polymer Testing. p. 407-416

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    Tribological behaviour of unfilled and filled TPU materials

    Godor, I., Schiffer, J., Grün, F., Schwarz, T. & Major, Z., 2010, 14th Nordic Symposium on Tribology - Abstracts. p. 59-59

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  27. Published

    Tribologische Funktionsweise von ungefüllten und gefüllten TPU-Dichtungsmaterialien - ein Erfahrungsbericht

    Godor, I., Schiffer, J., Major, Z., Grün, F. & Schwarz, T., 2010, In: Tribologie und Schmierungstechnik. 57, p. 21-27

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    Uniaxial compression testing of polymeric materials

    Jerabek, M., Major, Z. & Lang, R., 2010, In: Polymer Testing. p. 302-309

    Research output: Contribution to journal › Article › Research › peer-review

  29. 2009
  30. Published

    Characterization and simulation of the micromechanical behaviour of particulate filled polypropylene compounds under creep loading

    Gastl, S., Jerabek, M., Major, Z. & Lang, R., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  31. Published

    Characterization of the dynamic mechanical behavior of Polydimethylsiloxane based magneto elastomer

    Schrittesser, B., Major, Z. & Filipcsei, G., 2009, In: Journal of physics / Conference series. p. 1088-1092

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    Determination of material parameters for hyperelastic material models for two elastomer grades

    Major, Z. & Pinter, G., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  33. Published

    Einige Gesetzmäßigkeiten über das tribologische Verhalten von ungefüllten und gefüllten TPU-Materialien

    Godor, I., Schiffer, J., Grün, F., Major, Z. & Schwarz, T., 2009, Tribologie Fachtagung 2009: Reibung, Schmierung und Verschleiß - Forschung und praktische Anwendungen. p. 1-12

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  34. Published

    Experimental definition of a failure model for the tribological behaviour of polytetrafluorethylene bronze compounds

    Godor, I., Major, Z., Vezér, S. & Grün, F., 2009, In: Proceedings of the Institution of Mechanical Engineers. Part J, Journal of engineering tribology. 223, p. 807-815

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Filler/matrix-debonding and micro-mechanisms of deformation in particulate filled pp composites under tension

    Jerabek, M., Major, Z. & Lang, R., 2009, Euro Fillers 2009. p. 18-22

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  36. Published

    Influence of the microstructure on the tribological properties of TPU seal materials

    Godor, I., Grün, F., Major, Z., Hausberger, A. & Schwarz, T., 2009, Proceedings of European Polymer Congress, 2009. p. 197-197

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  37. 2008
  38. Published

    Analog triggered image acqusition method for optical measurement under cyclic load conditions

    Vezer, S. T. & Major, Z., 2008, In: Materials engineering. 15, 1, p. 5-13

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    Characterisation of the failure behavior of elastomer composites

    Major, Z., Kajtna, A., Kovacevic, Z., Mesec, A. & Kosir, M., 2008, ASPM 2008. p. 55-55

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  40. Published

    Characterisation of the fracture behavior of NBR and FKM grade elastomers for oilfield applications

    Major, Z. & Lang, R., 2008, Multilevel Approach to Fracture of Materials, Components and Structures. p. 228-228

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  41. Published

    Characterization of the Fracture and Fatigue Behavior of Elastomer Composites

    Major, Z. & Lang, R., 2008, EUROMECH Colloquium 502. p. 71-74

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  42. Published

    Characterization of the impact tensile behavior of glass fibre reinforced polyamide (PA-GF) Materials

    Major, Z. & Lang, R., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  43. Published

    Characterization of the magnetorheologica behavior of elastomers

    Schrittesser, B., Major, Z. & Filipcsei, G., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  44. Published

    Characterization of the magnetorheological behavior of fluids and elastomeers

    Major, Z., Filipcsei, G. & Zrinyi, M., 2008, ASPM 2008. p. 41-41

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  45. Published

    Characterization of the tensile behavior of glass fiber reinforced polyamide materials (PA-LGF) at high loading rates

    Major, Z. & Lang, R., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  46. Published

    Deformation Analysis Of Impact Loaded Composites

    Fuchs, P., Major, Z. & Lang, R., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  47. Published

    Development an implementation of a novel tribological test method and characterisation of TPU materials

    Hausberger, A., Bruckmoser, K. & Major, Z., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  48. Published

    Development an implementation of a novel tribological test method and characterization of TPU materials

    Hausberger, A., Bruckmoser, K. & Major, Z., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  49. Published

    Development of an in plane biaxial test setup for monotonic and cyclic tests

    Vezer, S. & Major, Z., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  50. Published

    Development of fretting fatigue test system

    Vezer, S. & Major, Z., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  51. Published

    Fracture analysis of annealed PVDF films

    Wallner, G., Major, Z., Maier, G. & Lang, R., 2008, In: Polymer Testing. 27, p. 392-402

    Research output: Contribution to journal › Article › Research › peer-review

  52. Published

    Friction Behaviour of Unfilled and Filled TPU

    Godor, I., Major, Z., Hausberger, A. & Schiffer, J., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  53. Published

    Fricton behavior of unfilled and filled thermoplastic polyurethane materials

    Godor, I., Grün, F. & Major, Z., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  54. Published

    Poission's ratio of polypropylen in relaxation, creep and monotinic tensile tests

    Tscharnuter, D., Jerabek, M. & Major, Z., 2008, Mechanics of time Dependent Materials Conference. p. 1-14

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  55. Published

    Tribological and material properties of PTFE-Bz-Compounds - Do the correspond?

    Godor, I., Grün, F., Major, Z., Vezer, S. & Leitgeb, A., 2008, 13th Nordic Symposium on Tribology. p. 1-14

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  56. 2007
  57. Published

    Analog triggered image acquisation for optical measurement under cyclic load conditions

    Vezer, S., Steinberger, R. & Major, Z., 2007.

    Research output: Contribution to conference › Poster › Research › peer-review

  58. Published

    Analog triggered image acquisation for optical measurment under cyclic load conditions

    Vezer, S., Steinberger, R. & Major, Z., 2007.

    Research output: Contribution to conference › Poster › Research › peer-review

Previous 1 2 3 Next
View graph of relations

Latest Research Output

View more (121)