Wilhelm Brandstätter

(Former)

1 - 54 out of 54Page size: 100

Research output

  1. 2015
  2. Published

    Numerical evaluation of oxide growth in metallic support microstructures of Solid Oxide Fuel Cells and its influence on mass transport.

    Reiss, G., Frandsen, H. L., Persson, A. H., Weiß, C. & Brandstätter, W., 25 Aug 2015, In: Journal of power sources. 297, p. 388-399 11 p., 297 (2015) .

    Research output: Contribution to journal › Article › Research › peer-review

  3. 2011
  4. Published

    A novel experimental method to determine dirt particle distribution inside filter material samples

    Brandstätter, W., Boiger, G. & Reiss, G., 2011, FILTECH 2011 - Conference Proceedings. p. 1-9

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  5. Published

    Hydrate formation in natural gas pipelines

    Brandstätter, W. & Naseer, M., 2011, Computational Methods in Multiphase Flow VI. p. 1-10

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  6. Published

    Modelling of non-spherical dirt particle motion and deposition in fluid filtration processes

    Boiger, G., Mataln, M. & Brandstätter, W., 2011, FILTECH 2011 - Conference Proceedings. p. 495-510

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  7. Published

    New Concepts and Technologies for Integrated Diesel Exhaust Gas After-Treatment Systems

    Brandstätter, W., Borla, E. M., Nicol, G. & Klug, M., 2011, SAE International Paper Number 2011-24-0184. p. 1-19

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  8. Published

    The influence of filter material deformation on permeability and pressure loss

    Brandstätter, W., Mataln, M. & Boiger, G., 2011, FILTECH 2011 - Conference Proceedings. p. 1-9

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  9. Published

    Transient 1-D Solver For Two-Phase Flow: Solving the Flux in Complex Pipe Networks

    Brandstätter, W., Reiss, G. & Gschaider, B., 2011, Open Source CFD International Conference 2011 - Proceedings. p. 1-10

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  10. 2009
  11. Published

    Adaptive time stepping for explicit Euler implementation of spherical and non-spherical particle speed up

    Boiger, G., Mataln, M. & Brandstätter, W., 2009, In: International journal of multiphysics. 3, p. 267-291

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    Adaptive time stepping for explizit euler implementation of spherical and non-spherical particle speed up

    Boiger, G., Mataln, M. & Brandstätter, W., 2009, In: International journal of multiphysics. 3, p. 267-291

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Evaluation of Performance of Diesel Particulate Filters Through Integrated Multi-Scale Computer Calculations

    Brandstätter, W., Yanagihara, H., Ohashi, N., Gschaider, B., Leixnering, J. & Stankovic, I., 2009, Springer Science and Business Media. p. 1842-1846

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  14. Published

    Simulation of Particle Filtration Processes in Deformable Media

    Mataln, M., Boiger, G. & Brandstätter, W., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  15. Published

    Simulation of Particle Filtration Processes in Deformable Media, Part 3.1: Basic concepts and particle-fluid force implementation of a non-spherical dirt particle solver

    Boiger, G., Mataln, M. & Brandstätter, W., 2009, In: International journal of multiphysics. 3, 4, p. 407-432

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Simulation of Particle Filtration Processes in Deformable Media, Part 3.2: Interaction modelling and solver verification of a non-spherical dirt particle solver

    Boiger, G., Mataln, M. & Brandstätter, W., 2009, In: International journal of multiphysics. 3, 4, p. 433-454

    Research output: Contribution to journal › Article › Research › peer-review

  17. 2008
  18. Published

    CFD-Analysis of Terrain-Induced Slug Flow Regimes in Multiphase Pipeline Systems

    Brandstätter, W., Ruthammer, G., Ragab, A. & Shalaby, S., 2008, SINTEF/NTNU.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  19. Published

    CFD-Numerical Analysis of Multiphase Production through Hilly Terrain Pipelines in Matzen Field – Austria

    Brandstätter, W., Ruthammer, G., Shalaby, S. & Ragab, A., 2008, SPE 115355-MS.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  20. Published

    CFD-Simulation of Multiphase Flows in Horizontal and Inclined Pipelines

    Brandstätter, W., Ragab, A. & Shalaby, S., 2008, In: Erdöl, Erdgas, Kohle. 124, p. 34-40

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    Multiphase Flows in Horizontal and Inclined Pipelines by CFD Simulations

    Brandstätter, W., Ruthammer, G., Shalaby, S. & Ragab, A., 2008, 5th Mediterranean Offshore Conference and Exhibition 2008 (MOC2008).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  22. Published

    Numerical Simulation of Slug Flow Phenomena in Horizontal and Inclined Pipelines

    Brandstätter, W., Ragab, A. & Shalaby, S., 2008, In: Erdöl, Erdgas, Kohle. 124, p. 194-199

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Part 1: FLUID-STRUCTURE INTERACTION Simulation of particle filtration processes in deformable media.

    Mataln, M., Boiger, G., Gschaider, B. & Brandstätter, W., 2008, In: International journal of multiphysics. p. 178-189

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    Part 2: LARGE PARTICLE MODELLING Simulation of particle filtration processes in deformable media

    Boiger, G., Mataln, M., Gschaider, B. & Brandstätter, W., 2008, In: International journal of multiphysics. 2, p. 190-206

    Research output: Contribution to journal › Article › Research › peer-review

  25. 2007
  26. Published

    A Multiscale Simulation Approach for Diesel Particulate Filter Design Based on OpenFOAM and DexaSIM

    Leixnering, J., Gschaider, B., Brandstätter, W. & Bouwman, M., 2007, OpenFOAM International Conference 2007. p. 1-20

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  27. 2006
  28. Published

    “Numerical Study on Mould Powder Entrapment Caused by Vortexing in a Continuous Casting Process

    Kastner, G., Brandstätter, W., Kaufmann, B. & Wassermayr, C., 2006, In: RHI bulletin : the journal of refractory innovations. 2, p. 38-42

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    Numerical Study on Mould Powder Entrapment Caused by Vortexing in a Continuous Casting Process

    Kastner, G., Brandstätter, W., Kaufmann, B., Wassermayr, C. & Javurek, M., 2006, In: Steel research international. 77, p. 404-408

    Research output: Contribution to journal › Article › Research › peer-review

  30. 2005
  31. Published

    ”A Unified Approach to Model Fluid-Structure Interactions”

    Brandstätter, W. & Mataln, M., 2005, Petroleum Engineering Seminar 2005. p. 1-6

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  32. Published

    Three Dimensional Simultion of Gas Escape from Leaking Pipelines

    Sauer, M., Ruthammer, G. & Brandstätter, W., 2005, Three Dimensional Simultion of Gas Escape from Leaking Pipelines. p. 11-30

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  33. 2004
  34. Published

    DPF SOOT MAPPING. A Simple and Cost Effective Measurement Method for Series Development

    Brandstätter, W. & Kroner, P., 2004, DPF SOOT MAPPING. A Simple and Cost Effective Measurement Method for Series Development. p. 0-0

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  35. Published

    Modeling and Simulations”

    Brandstätter, W., 2004, Modeling and Simulations”. p. 0-0

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  36. Published

    Simulation of Bubble Formation Based on the Lattice Boltzmann Method

    Brandstätter, W., Redl, C., Steiner, J. & Triessnig, A., 2004, Simulation of Bubble Formation Based on the Lattice Boltzmann Method”. p. 0-0

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  37. 2003
  38. Published

    ”Virtual Engineering of Diesel Exhaust Systems to Meet Future Emission Legislation”

    Brandstätter, W., Wassermayr, C., Schreier, H. & Prenninger, P., 2003, ”Virtual Engineering of Diesel Exhaust Systems to Meet Future Emission Legislation”. p. 0-0

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  39. Published

    Virtual Fires – Experiences With Developing a LBGK Based Real Time Tunnel Fire Simulator for Virtual Environments“

    Brandstätter, W. & Redl, C., 2003, In: Lecture notes in computer science. p. 1062-1062

    Research output: Contribution to journal › Article › Research › peer-review

  40. 2002
  41. Published

    An Integrated Approach for the Design of Diesel Engine Exhaust Systems to meet Euro 4 and beyond Emissions Legislations

    Brandstätter, W., Wassermayr, C. & Prenninger, P., 2002, An Integrated Approach for the Design of Diesel Engine Exhaust Systems to meet Euro 4 and beyond Emissions Legislations. p. 0-0

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  42. 2000
  43. Published

    Critical Comparison of Experimental and Computational Fluid Dynamic Results for a Spray Chamber in ICPMS"

    Brandstätter, W., Wegscheider, W. & Fasch, E., 2000, Critical Comparison of Experimental and Computational Fluid Dynamic Results for a Spray Chamber in ICPMS". p. 0-0

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  44. 1998
  45. Published

    Recent Findings Regarding High Pressure Diesel Spray Simulations"

    Brandstätter, W. & Pachler, K., 1998, Recent Findings Regarding High Pressure Diesel Spray Simulations". p. 0-0

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  46. Published

    "The Application of 1D and 3D Fluid Dynamics Analysis Methods for Intake and

    Brandstätter, W. & Wieser, K., 1998, "The Application of 1D and 3D Fluid Dynamics Analysis Methods for Intake and. p. 0-0

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  47. 1997
  48. Published

    “Calculation of the Hydroplaning of Smooth and Grooved Tires Including Effects of Deformability”

    Brandstätter, W. & Grogger, H., 1997, “Calculation of the Hydroplaning of Smooth and Grooved Tires Including Effects of Deformability”. p. 0-0

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  49. Published

    Optimization of the Combustion Process in Multi-Valve Gasoline Engines using Advenced Design Tools

    Brandstätter, W. & Philipp, H., 1997, Optimization of the Combustion Process in Multi-Valve Gasoline Engines using Advenced Design Tools. p. 0-0

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  50. 1996
  51. Published

    "Calculation of Flow Around a Car Body with Various Turbulence Models"

    Brandstätter, W. & Bachler, G., 1996, "Calculation of Flow Around a Car Body with Various Turbulence Models". p. 0-0

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  52. 1994
  53. Published

    Strömungssimulation auf Parallelrechnern in der Automobilindustrie - Ergebnisse der FIRE-Anwendung"

    Brandstätter, W., Bachler, G., Greimel, R. & Schiffermüller, H., 1994, Strömungssimulation auf Parallelrechnern in der Automobilindustrie - Ergebnisse der FIRE-Anwendung". p. 0-0

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  54. 1993
  55. Published

    Mehrdimensionale Simulation in Automobilbau, Klimatechnik und Alpinem Umweltschutz

    Brandstätter, W., 1993

    Research output: Thesis › Habilitation thesis › peer-review

  56. Published

    “The Application of a Hybrid Finite-Volume/Monte Carlo PDF Method to Engine Combustion Simulation”

    Brandstätter, W. & Tatschl, R., 1993, “The Application of a Hybrid Finite-Volume/Monte Carlo PDF Method to Engine Combustion Simulation”. p. 0-0

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  57. 1992
  58. Published

    Dreidimensionale Simulation von Staublawinen unter Berücksichtigung realer Geländeformen

    Brandstätter, W., 1992, In: Wildbach- und Lawinenverbau. 56, p. 107-129

    Research output: Contribution to journal › Article › Research › peer-review

  59. Published

    “Mehrdimensionale Simulation des Zündvorgangs in homogen vorgemischter Ladung unter Einbeziehung mehrstufiger Reaktionskinetik

    Brandstätter, W. & Tatscl, R., 1992, “Mehrdimensionale Simulation des Zündvorgangs in homogen vorgemischter Ladung unter Einbeziehung mehrstufiger Reaktionskinetik. p. 0-0

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  60. Published

    “Three-Dimensional Simulation of Powder Avalanches”

    Brandstätter, W., Wieser, K. & Schaffhauser, H., 1992, “Three-Dimensional Simulation of Powder Avalanches”. p. 0-0

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  61. 1991
  62. Published

    “Calculation of Inhomogeneous-Charge Combustion in a Swirl-Assisted Lean-Burn Engine”

    Brandstätter, W. & Kratochwill, H., 1991, “Calculation of Inhomogeneous-Charge Combustion in a Swirl-Assisted Lean-Burn Engine”. p. 0-0

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  63. Published

    “Dreidimensionale Simulation und Experimentelle Verifizierung der Strömung in Verbrennungsmotoren”

    Brandstätter, W., Steffan, H. & Wieser, K., 1991, VDI-Berichte. Vol. 2. p. 290-319 (VDI-Berichte).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  64. Published

    Multidimensional Calculation of Spark Flame Initiation and Propagation with a Generic Chemical Kinetic Reaction Scheme”

    Brandstätter, W. & Tatschl, R., 1991, Multidimensional Calculation of Spark Flame Initiation and Propagation with a Generic Chemical Kinetic Reaction Scheme”. p. 0-0

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  65. 1989
  66. Published

    Comparison of Newtonian and Non-Newtonian Bloodflow in Stenotic Vessels Using Numerical Simulation

    Brandstätter, W., Bachler, G., Pucher, R. & Steffen, H., 1989, Comparison of Newtonian and Non-Newtonian Bloodflow in Stenotic Vessels Using Numerical Simulation. p. 0-0

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  67. Published

    “Dreidimensionale Simulation von Strömungs-, Gemischbildungs- und Verbrennungsvorgängen”

    Brandstätter, W., Steffan, H., Bachler, G. & Wieser, K., 1989, “Dreidimensionale Simulation von Strömungs-, Gemischbildungs- und Verbrennungsvorgängen”. p. 0-0

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  68. Published

    Multidimensional Calculation of the Flow Processes in a Loop Scavenged Two-Stroke Cycle Engine”

    Brandstätter, W. & Kratochwill, H., 1989, Multidimensional Calculation of the Flow Processes in a Loop Scavenged Two-Stroke Cycle Engine”. p. 0-0

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  69. Published

    “The Influence of Inlet Port Design on the In-Cylinder Charge Mixing”

    Brandstätter, W. & Kartochwill, H., 1989, “The Influence of Inlet Port Design on the In-Cylinder Charge Mixing”. p. 0-0

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  70. 1988
  71. Published

    “Computersimulation der Strömung, Gemischbildung und Verbrennung in Motoren”

    Brandstätter, W. & Killmann, I., 1988, In: Motortechnische Zeitschrift : MTZ. 5, p. 117-186

    Research output: Contribution to journal › Article › Research › peer-review

  72. Published

    Multidimensional Engine Combustion Modelling - A Challenge for Supercomputers

    Brandstätter, W., Fischer, H. & Melcher, T., 1988, Multidimensional Engine Combustion Modelling - A Challenge for Supercomputers. p. 0-0

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  73. Published

    The Increasing Impact of Multidimensional Modelling on the Design and Development of High Speed DI Diesel Engines”

    Brandstätter, W., 1988, The Increasing Impact of Multidimensional Modelling on the Design and Development of High Speed DI Diesel Engines”. p. 0-0

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  74. 1986
  75. Published

    “Computer Simulation of External and Internal Flows in the Automotive Industry”

    Brandstätter, W. & Johns, R. J. R., 1986, “Computer Simulation of External and Internal Flows in the Automotive Industry”. p. 0-0

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

View graph of relations

Latest Research Output

View more (54)