Wilfried Eichlseder

201 - 250 out of 287Page size: 50

Research output

  1. 2007
  2. Published

    Lifetime assessment of cyclic thermo-mechanical loaded strip casting mills

    Prillhofer, B., Riedler, M. & Eichlseder, W., 2007, Horizons of Sustainable Growth of the Non-ferrous Metals Production. p. 1863-1876

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  3. Published

    Lifetime simulation of thermo-mechanically loaded components

    Riedler, M., Leitner, H., Prillhofer, B., Winter, G. & Eichlseder, W., 2007, In: Meccanica. 42, p. 47-59

    Research output: Contribution to journal › Article › Research › peer-review

  4. Published

    Materialmodellierung und Lebensdauerabschätzung

    Ehart, R., Nefischer, P. & Eichlseder, W., 2007, In: MP materials testing : Materialprüfung . p. 474-479

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    Multiaxial Fatigue of Cast Irons and QT-Steels: Development of a New Fatigue Strength Criterion

    Fröschl, J., Gerstmayr, G., Eichlseder, W. & Leitner, H., 2007, Multiaxial Fatigue of Cast Irons and QT-Steels: Development of a New Fatigue Strength Criterion. p. 1-2

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  6. Published

    Multiaxial Fatigue of QT-Steels: New Fatigue Strength Criterion for Anisotropic Material Behaviour

    Fröschl, J., Gerstmayr, G., Eichlseder, W. & Leitner, H., 2007, Multiaxial Fatigue of QT-Steels: New Fatigue Strength Criterion for Anisotropic Material Behaviour. p. 1-8

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  7. Published

    Neuere Berechnungssätze für die betriebsfeste Auslegung von Gussbauteilen in Leichtbauweise

    Fröschl, J., Gänser, H.-P., Gerstmayr, G. & Eichlseder, W., 2007, In: Gießerei-Rundschau. p. 222-230

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Oberflächenbehandlung durch Kugelstrahlen und Festwalzen

    Leitner, H., Gänser, H.-P. & Eichlseder, W., 2007, In: Materialprüfung. p. 408-413

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Schadensorientierte Prüfmethoden und abgeleitete Funktionsmodelle für Gleitwerkstoffe

    Grün, F., Godor, I. & Eichlseder, W., 2007, In: Tribologie und Schmierungstechnik. 54, p. 26-30

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    Schwingfestigkeit von Al-Druckgussteilen unter Berücksichtigung fertigungsprozessbedinter Werkstoffhomogenitäten

    Fagschlunger, C., Eichlseder, W., Pötter, K. & Brune, M., 2007, In: Giesserei. p. 42-50

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    Some influences on the fatigue behaviour of short-glasfiber-reinforced polymers

    Guster, C., Pinter, G., Eichlseder, W. & Lang, R., 2007, Experimental Analysis of Nano and Engineering Materials and Structures. p. 125-126

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  12. Published

    Test Methods for the Characterisation of Different Designed Tribomaterials

    Godor, I., Grün, F. & Eichlseder, W., 2007, Proceedings of the European Conference on Tribology ECOTRIB 2007. p. 1123-1134

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  13. Published

    The influence of fiber-orientation and stress ratio on the fatigue behavior of short-glasfiber-reinforced polymers

    Guster, C., Pinter, G., Eichlseder, W. & Lang, R. W., 2007, Society of Plastics Engineers Annual Technical Conference: Plastics Encounter at ANTEC 2007, Conference Proceedings. p. 284-288 5 p. (Annual Technical Conference - ANTEC, Conference Proceedings; vol. 1).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  14. Published

    The influence of fiber-orientation and stress ratio on the fatigue behavior of short-glass-fiber-reinforced plastics

    Guster, C., Pinter, G., Eichlseder, W. & Lang, R., 2007, ANTEC 2007. p. 284-288

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  15. Published

    The Influence of Temperature and Pre-Aging on the Low Cycle Fatigue Behaviour of Nickel Coatings (Ni 200/201)

    Köberl, H., Leitner, H. & Eichlseder, W., 2007, Experimental Analysis of Nana and Engineering Materials and Structures. p. 731-733

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  16. Published

    Tribowerkstoffe auf der Basis von Aluminium

    Grün, F., Godor, I. & Eichlseder, W., 2007, Reliability Engineering - Simulation und Monitoring von verschleißgefährdeten Systemen. p. 93-103

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  17. 2006
  18. Published

    An Investigation of the Cyclic Hardening Behaviour of an Aluminium-Steel Compound

    Lamik, A., Leitner, H., Eichlseder, W. & Lomolino, S., 2006, 23rd Danubia-Adria Symposium on Experimental Methods in Solid Mechanics. p. 171-172

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  19. Published

    Assessment of the fatigue behaviour of nonporous surface layers in aluminium casting components based on the cyclic charcteristic of the porous base material

    Fagschlunger, C. & Eichlseder, W., 2006, In: Materialprüfung. 48, p. 142-151

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Betrachtungen zur Schwingfestigkeit multiaxial beanspruchter Bauteile

    Fröschl, J., Lamik, A. & Eichlseder, W., 2006, 1. Leobener Betriebsfestigkeitstage. p. 159-174

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  21. Published

    Betriebsfestigkeitsuntersuchungen von faserverstärkten Kunststoffen

    Guster, C., Balika, W., Lang, R. & Eichlseder, W., 2006, 1. Leobner Betriebsfestigkeitstage 2006. Montanuniversität Leoben, Lehrstuhl für Allgemeinen Maschinenbau, p. 279-292

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  22. Published

    Calibrating Tribological Tests on the Basis of Simulation Models

    Grün, F., Godor, I., Vitek, T. & Eichlseder, W., 2006, Winter Workshop of Applied Mechanics. p. 8-15

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  23. Published

    Characterisation of Tribomaterials by Simulation and Tribological Tests

    Grün, F., Godor, I., Leitgeb, A., Köberl, H. & Eichlseder, W., 2006, Characterisation of Tribomaterials by Simulation and Tribological Tests. p. 73-74

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  24. Published

    Characterisation of Tribomaterials by Simulation and Tribological Tests

    Grün, F., Godor, I., Leitgeb, A., Köberl, H. & Eichlseder, W., 2006.

    Research output: Contribution to conference › Poster › Research › peer-review

  25. Published

    Development of ABAQUS Model for Compound Material Friction Temperature Dependency Simulation

    Vitek, T., Grün, F., Leitgeb, A., Stoschka, M., Godor, I. & Eichlseder, W., 2006, Winter Workshop of Applied Mechanics. p. 46-51

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  26. Published

    Dimensioning against fatigue – stress-based approach or fracture mechanics?

    Gänser, H.-P., Glinsner, K. & Eichlseder, W., 2006, In: Proceedings of the Institution of Mechanical Engineers / C (Part C, Journal of mechanical engineering science). 220, p. 1109-1120

    Research output: Contribution to journal › Article › Research › peer-review

  27. Published

    Einfluss der Warmformgebung auf die Schwingfestigkeit

    Stoschka, M., Gach, E., Stockinger, M. & Eichlseder, W., 2006, Einfluss der Warmformgebung auf die Schwingfestigkeit. p. 117-132

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  28. Published

    Enhanced Fatigue Life by Mechanical Surface Treatments – Experiment and Simulation

    Gänser, H.-P., Godor, I., Leitner, H. & Eichlseder, W., 2006, Fracture of Nano and Engineering Materials and Structures. Springer, p. 205-206

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  29. Published

    Lebensdauerberechnung von Aluminiumkomponenten: Von der Probe zum komplexen Bauteil

    Leitner, H., Eichlseder, W. & Fagschlunger, C., 2006, In: Gießerei-Rundschau. 3, p. 70-76

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    Lifetime investigations of wear-resistant ni-coatings

    Köberl, H., Leitner, H., Riedler, M. & Eichlseder, W., 2006, 23rd Danubia-Adria Symposium on experimental methods in solid mechanics. p. 173-175

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  31. Published

    Lifetime investigations of wear-resistant ni-coatings

    Köberl, H., Leitner, H., Riedler, M. & Eichlseder, W., 2006.

    Research output: Contribution to conference › Poster › Research › peer-review

  32. Published

    Multiaxiale Ermüdung - Versuchsergebnisse versus Festigkeitshypothesen

    Leitner, H., Fröschl, J., Gerstmayr, G. & Eichlseder, W., 2006, In: Berg- und hüttenmännische Monatshefte : BHM. 151, p. 350-356

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    Schadensanalytik als Basis für tribometrische Untersuchungen am Beispiel eines Gleitlagers

    Grün, F., Godor, I. & Eichlseder, W., 2006, Reibung Schmierung und Verschleiß-Forschung und praktische Anwendung. p. 44/1-44/10

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  34. Published

    Schadensorientierte Prüfmethodenentwicklung am Beispiel eines Gleitlagers

    Grün, F., Godor, I. & Eichlseder, W., 2006, 1. Leobener Betriebsfestigkeitstage. p. 45-60

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  35. Published

    Schwingfestigkeitsverhalten von Al6016T4/DC06 Werkstoffverbunden

    Lamik, A., Leitner, H., Eichlseder, W. & Riemelmoser, F., 2006, Vom Werkstoff zum Bauteilsystem. p. 251-262

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  36. Published

    Simulation der Lebensdauer von Bauteilen unter thermomechanischer Ermüdungsbeanspruchung

    Riedler, M., Winter, G., Minichmayr, R. & Eichlseder, W., 2006, Simulation der Lebensdauer von Bauteilen unter thermomechanischer Ermüdungsbeanspruchung. p. 175-190

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  37. Published

    Tendenzen in der Lebensdauerberechnung

    Eichlseder, W., 2006, Tendenzen in der Lebensdauerberechnung. p. 5-16

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  38. Published

    The Influence of Technological Effects and Multiaxial Loading on the Fatigue Strength of QT Steels

    Fröschl, J., Lamik, A. & Eichlseder, W., 2006, Fatigue 2006. p. 1-8

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  39. Published

    The influences of pre-aging, temperature and strain rate on low cycle fatigue and thermo-mechanical fatigue of CuCo2Be

    Prillhofer, B., Riedler, M. & Eichlseder, W., 2006, Better Properties for Innovative Products. p. 34-43

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  40. Published

    Thermomechanische Ermüdung eines bauteilähnlichen Al-Ersatzprüfkörpers (AlCuBiPb)

    Prillhofer, B., Robert, M., Riedler, M. & Eichlseder, W., 2006, Thermomechanische Ermüdung eines bauteilähnlichen Al-Ersatzprüfkörpers (AlCuBiPb). ASMET, p. 179-187

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  41. Published

    Tribological Studies on Sliding Bearings on the Basis of Damage Analysis

    Grün, F., Godor, I. & Eichlseder, W., 2006, Advanced Problems in Mechanics (APM). p. 200-211

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  42. Published

    Tribological test engineering - Comparison of component tests of sliding bearings with tribological model tests

    Grün, F., Gódor, I. & Eichlseder, W., 2006, In: Transactions of FAMENA. 30, 1, p. 37-44 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    Tribological Test Engineering-Comparsion of Sliding Bearings with Tribological Model Tests

    Grün, F., Godor, I. & Eichlseder, W., 2006, In: Transactions of FAMENA. p. 37-44

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    Tribologische Prüftechnik-Vergleich Bauteilprüfung von Gleitlagern mit Prüfung an einem tribologischem Ersatzmodell

    Grün, F., Godor, I. & Eichlseder, W., 2006, In: Österreichische Ingenieur- und Architekten-Zeitschrift : ÖIAZ. 151 Jg, p. 34-41

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    Tribometric Analysis of two tribo-materials with different contact geometries-critical reflection and simulation of the results

    Grün, F., Godor, I., Araujo, B. & Eichlseder, W., 2006, Analysis and Simulation of Contact Problems. p. 387-388

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  46. Published

    Übertragbarkeit von Versuchsergebnissen an Rundproben auf thermomechanisch beanspruchte Bauteile

    Prillhofer, B., Riedler, M. & Eichlseder, W., 2006, Tagungsband. Montanuniversität Leoben, Lehrstuhl für Allgemeinen Maschinenbau, p. 191-202

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  47. Published

    Universitärer Forschungscluster "Sustainable Technologies in Metal Production and Processing" (STMP)

    Antrekowitsch, H., Biedermann, H., Buchmayr, B., Ebner, F., Eichlseder, W., Harmuth, H., Kepplinger, W., Kessler, F., Krieger, W., Lorber, K. & Ludwig, A., 2006, In: Berg- und hüttenmännische Monatshefte : BHM. 151, p. 263-265

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    Vergleich der Funktionsweise von Tribomaterialien unterschiedlichen Aufbaus in Gleitanwendungen

    Grün, F., Godor, I., Eichlseder, W. & Gärtner, W., 2006, Vergleich der Funktionsweise von Tribomaterialien unterschiedlichen Aufbaus in Gleitanwendungen. p. 89-96

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  49. 2005
  50. Published

    Abschätzung der tolerierbaren Oxidhautgrößen in schwingend belasteten Druckgussbauteilen

    Fagschlunger, C., Eichlseder, W., Sonsino, C., Poetter, K., Brune, M. & Gänser, H.-P., 2005, In: Gießerei-Rundschau. p. 60-66

    Research output: Contribution to journal › Article › Research › peer-review

  51. Published

    A comparison of two experimental methods for assessing the influence of initial defects on fatigue life

    Gänser, H.-P., Godor, I., Eichlseder, W., Pippan, R., Ofner, R. & Vollgger, R., 2005, A comparison of two experimental methods for assessing the influence of initial defects on fatigue life. Eigenverlag, p. 500-500

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  52. Published

    A High Cycle Fatigue Model for Al-Alloys based on Low Cycle Fatigue Data and Notch Sensitivity

    Riedler, M., Araujo, B., Leitner, H. & Eichlseder, W., 2005, A High Cycle Fatigue Model for Al-Alloys based on Low Cycle Fatigue Data and Notch Sensitivity. DAS Secretariat, p. 178-179

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  53. Published

    Applicability of plastic and total hysteresis energy criterions for simulating the TMF lifetime

    Riedler, M., Winter, G., Minichmayr, R. & Eichlseder, W., 2005, Applicability of plastic and total hysteresis energy criterions for simulating the TMF lifetime. p. 35-35

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Previous 1 2 3 4 5 6 Next
View graph of relations

Contact

Phone: 1400

Latest Research Output

View more (287)