Walter Friesenbichler

(Former)

121 - 140 out of 290Page size: 20

Research output

  1. 2015
  2. Published

    Simulation Aided Twin Screw Optimization for Polymer Nanoclay Composites

    Schuschnigg, S., Battisti, M., Joachim, W.-E., Friesenbichler, W. & Holzer, C., 2015, Danube Vltava Sava Polymer Meeting-DVSPM 2015 : Proceedings of a Conference on Polymer Science. Linz, p. 88 O13

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  3. Published

    Visualization of Flow Patterns and Dead Volume in Rubber Processing by Means of Capillary Rheometry with various Die Geometries

    Kerschbaumer, R., Lechner, B., Perko, L. & Friesenbichler, W., 2015, Polymer Processing Society Graz 2015 - Book of Abstract. p. 78 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  4. 2014
  5. Published

    Robuste Prozessführung beim Kautschukspritzgießen unter Nutzung systematischer Simulation und verbesserter Materialdaten

    Fasching, M., Berger, G., Friesenbichler, W., Filz, P. & Helbich, B., Oct 2014, In: GAK : Gummi, Fasern, Kunststoffe. 10/2014, p. 640-644 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    ВЗРЫВНОЙ ПАТРОН

    Bauer, F. (Inventor), Moser, P. (Inventor), Friesenbichler, W. (Inventor), Schatzer, R. (Inventor) & Fertschej, A. (Inventor), 27 Apr 2014, IPC No. F42B 3/ 087 A I, Patent No. RU2012145175, Priority date 25 Mar 2011, Priority No. WO2011EP54635

    Research output: Patent

  7. Published

    Einsatz der Simulation in der systematischen Bauteilentwicklung

    Berger, G. & Friesenbichler, W., 27 Feb 2014, p. 1-38. 38 p.

    Research output: Contribution to conference › Presentation › Research › peer-review

  8. Published

    A Novel Sink Mark Model for High Gloss Injection Molded Parts - Correlation of Deflectometric and Topographic Measurements

    Macher, J., Gruber, D. P., Altenbuchner, T., Pacher, G., Berger, G. & Friesenbichler, W., 2014, In: Polymer Testing. 39, p. 12-19

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Chapter 12: Injection Molding Compounding of Polymer Nanocomposites

    Battisti, M. & Friesenbichler, W., 2014, New Developments in Polymer Composites Research. p. 301-324

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  10. Published

    Detection of Visually Perceptible Sink Marks on High Gloss Injection Molded Parts by Phase Measuring Deflectometry

    Macher, J., Gruber, D. P., Altenbuchner, T., Pacher, G., Berger, G. & Friesenbichler, W., 2014, In: Polymer Testing. p. 42-48

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    Determination of a Robust Process Setting for an Injection Molded Mirror Drive Component Using D-Optimal DoE

    Berger, G., Friesenbichler, W., Luger, H.-J., Gierth, M., Beytollahi, I. & Filz, P., 2014, 30th International Conference of the Polymer Processing Scociety: DIGITAL BOOK OF ABSTRACTS AND CONFERENCE PAPERS. p. 10-390

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  12. Published

    Elongational flow generating devices for the improvement of mechanical properties of PP-PNCs

    Friesenbichler, W., Battisti, M., Chitu, L. & Feuchter, M., 2014, 6th International PMI Conference Proceedings. p. 139-143

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  13. Published

    Evaluation of Rubber Injection Molding Simulation by Correlation of Simulated Curing Degree to Measureable Part Properties

    Fasching, M., Friesenbichler, W. & Berger, G., 2014, 30th International Conference of the Polymer Processing Scociety: DIGITAL BOOK OF ABSTRACTS AND CONFERENCE PAPERS. p. 11-349

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  14. Published

    Hochqualitative Bauteiloberflächen im Spritzguss – Möglichkeiten und Grenzen der Prozessführung

    Friesenbichler, W. & Berger, G., 2014, Tagungsband: Spritzgießen & Veredeln; Produktion funktioneller, hochwertiger Oberflächen. Deutschland: Carl Hanser Verlag GmbH & Co. KG

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  15. Published

    Influence of mold surface temperature on polymer part warpage in rapid heat cycle molding

    Berger, G. R., Pacher, G. A., Pichler, A., Friesenbichler, W. & Gruber, D. P., 2014, Proceedings of PPS 2013 - 29th International Conference of the Polymer Processing Society, Conference Papers. Vol. 1593. p. 189-194 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  16. Published

    Influence of Thermal Conductivity of PP-Based Compounds on Surface Roughness of Rapid Heat Cycle Injection Molded Parts

    Pacher, G., Geissler, B., Macher, J., Berger, G., Gruber, D. P. & Friesenbichler, W., 2014, 30th International Conference of the Polymer Processing Scociety: DIGITAL BOOK OF ABSTRACTS AND CONFERENCE PAPERS. p. 10-136

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  17. Published

    In-mold sensor concept to calculate process-specific rheological properties

    Pacher, G. A., Berger, G. R., Friesenbichler, W., Gruber, D. P. & Macher, J., 2014, In: AIP Conference Proceedings. 1593, p. 179-182

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Measurement of the visual perceptibility of sink marks on injection molding parts by a new fast processing model

    Gruber, D. P., Macher, J., Haba, D., Berger, G., Pacher, G. & Friesenbichler, W., 2014, In: Polymer Testing. 33, p. 7-12

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Model for the Prediction of Bulk Temperature Changes and Pressure Losses in Rubber Compounds Flowing Through Conical Dies: An Engineering Approach: Wiley Online Library - Polymer Engineering & Science

    Perko, L., Fasching, M. & Friesenbichler, W., 2014

    Research output: Non-textual form › Web publication/site › Transfer

  20. Published

    Model for the Prediction of Bulk Temperature Rises and Pressure Losses in Conical Dies for Rubber Compounds – an Engineering Approach

    Perko, L., Fasching, M. & Friesenbichler, W., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  21. Published

    Model for the Prediction of Bulk Temperature Rises and Pressure Losses in Conical Dies for Rubber Compounds – an Engineering Approach

    Perko, L., Fasching, M. & Friesenbichler, W., 2014, 30th International Conference of the Polymer Processing Scociety: DIGITAL BOOK OF ABSTRACTS AND CONFERENCE PAPERS. p. 04-129

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  22. Published

    PP-Polymer Nanocomposites with Improved Mechanical Properties Using Elongational Flow Devices at the Injection Molding Compounder

    Battisti, M. G. & Friesenbichler, W., 2014, In: AIP Conference Proceedings. 1593, p. 195-198

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1...3 4 5 6 7 8 9 10 ...15 Next
View graph of relations

Latest Research Output

View more (290)