Walter Friesenbichler

(Former)

201 - 290 out of 290Page size: 100

Research output

  1. 2011
  2. Published

    Cluster Award 2011 - Das beste Kooperationsprojekt zwischen Unternehmen und F&E Einrichtung

    Friesenbichler, W., 2011, In: Österreichische Kunststoff-Zeitschrift. p. 229-230

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    Development and validation of a physical model for the expansion injection molding process

    Friesenbichler, W., Rajganesh Jegadeesan, X. & Steinbichler, G., 2011,

    PPS 27: Program & Abstracts

    .     p. 199-199

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  4. Published

    Feierliche Inbetriebnahme des weltweit einzigartigen MUL-Spritzgießcompounders

    Friesenbichler, W. & Battisti, M., 2011, In: VLK-News. p. 18-19

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    Feierliche Inbetriebnahme des weltweit einzigartigen MUL-Spritzgießcompounders

    Friesenbichler, W. & Battisti, M., 2011, In: Österreichische Kunststoff-Zeitschrift. p. 292-292

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    Improving the polymer surface quality by infrared radtiation driven dynamic mold temperature control

    Berger, G., Roock, S., Gruber, D. P., Friesenbichler, W. & Steinbichler, G., 2011,

    PPS 27: Program & Abstracts

    .     p. 199-199

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  7. Published

    Influence of steel-, polymer grade and surface roughness on wetting

    Lugger, M., Schmied, F., Berger, G., Teichert, C. & Friesenbichler, W., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  8. Published

    Leichtbaupotentiale in der E-Mobility: Kunststofftechnische Herausforderungen beim Batteriegehäuse

    Kienzl, W., Berger, G. & Friesenbichler, W., 2011, 20. Leobener Kunststoff-Kolloquium: Polymerer Leichtbau. p. 131-142

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  9. Published

    Measuring the pressure dependent viscosity at high shear rates using a new rheological injection mould

    Friesenbichler, W., Duretek, I., Rajganesh Jegadeesan, X. & Selvasankar, R. K., 2011, In: Polimery/Polymers. 56, 1, p. 58-62

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    Nachruf auf O.Univ.-Prof. i. R. Dr. rer. nat. Dipl.-Phys. Werner Knappe

    Friesenbichler, W., 2011, In: Österreichische Kunststoff-Zeitschrift. p. 294-295

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    Neue Maplan-Gummispritzmaschine für die Kunststofftechnik Leoben

    Friesenbichler, W., 2011, In: Österreichische Kunststoff-Zeitschrift. p. 293-293

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    Novel approach to the measurement of the visual perceptibility of sink marks on injection molding parts

    Gruber, D. P., Berger, G., Pacher, G. & Friesenbichler, W., 2011, In: Polymer Testing. p. 651-656

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Replication of Stochastic and Geometric Micro Structures. Aspects of Visual Appearance

    Berger, G., Gruber, D. P., Friesenbichler, W., Teichert, C. & Burgsteiner, M., 2011, In: International polymer processing. XXVI, p. 313-322

    Research output: Contribution to journal › Article › Research › peer-review

  14. 2010
  15. Published

    40 Jahre Kunststofftechnik Leoben

    Friesenbichler, W. (Editor), 2010, Österreich: Eigenverlag.

    Research output: Book/Report › Book › Research

  16. Published

    Ein innovativer systematischer Ansatz für die beschleunigte Produktentwicklung von komplexen Spritzgießteilen

    Friesenbichler, W., Brunnthaler, M., Altendorfer, F. & Bürtlmair, H., 2010, In: Österreichische Kunststoff-Zeitschrift. p. 10-13

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    Hochglanzoberflächen beim Spritzgießen - Quantitative topografische Beurteilung der Formenstahl- und Kunststoffoberfläche

    Berger, G., Friesenbichler, W., Reitter, M., Jutz, S. & Langecker, G., 2010, In: MP materials testing : Materialprüfung . 52, p. 211-221

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Hochglanzoberflächen beim Spritzgießen. Quantitive topografische Beurteilung der Formenstahl- und Kunststoffoberfläche

    Berger, G., Friesenbichler, W., Reitter, M., Jutz, S. & Langecker, G., 2010, In: MP materials testing : Materialprüfung . 52, p. 211-221

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Measurement of pressure dependent viscosity and its influence on injection molding simulation

    Friesenbichler, W., Rajganesh Jegadeesan, X., Lucyshyn, T., Filz, P. & Webelhaus, K., 2010, 4th International PMI Conference - Conference Proceedings. p. 215-219

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  20. Published

    Novel methodologies for the measurement of preceptual surface properties

    Gruber, D. P. & Friesenbichler, W., 2010, Book of Abstracts. p. 63-63

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  21. Published

    Overview of influences on demolding forces in injection molding

    Berger, G. & Friesenbichler, W., 2010, 4th International PMI Conference - Conference Proceedings. p. 197-206

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  22. Published

    Physical model for the expansion injection molding process and degradation effects on the injection molded parts

    Friesenbichler, W., Rajganesh Jegadeesan, X., Steinbichler, G. & Aust, N., 2010, 4th International PMI Conference - Conference Proceedings. p. 220-226

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  23. Published

    Praxisnahe Viskositäten für die Simulation

    Friesenbichler, W., Duretek, I. & Rajganesh Jegadeesan, X., 2010, In: Kunststoffe. 3, p. 37-40

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    The abrasive wear of plastic mould steels as a function of steel hardness

    Oláh, L., Friesenbichler, W. & Zinner, S., 2010, Book of Abstracts. p. 112-113

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  25. Published

    The abrasive wear of plastic mould steels as a function of steel hardness

    Oláh, L., Friesenbichler, W. & Zinner, S., 2010.

    Research output: Contribution to conference › Poster › Research › peer-review

  26. Published

    Virtual Process Design in Expansion Injection Molding

    Rajganesh Jegadeesan, X., Friesenbichler, W. & Steinbichler, G., 2010, In: Kunststoffe <München> / Kunststoffe international. 100, p. 148-152

    Research output: Contribution to journal › Article › Research › peer-review

  27. Published

    Virtuelle Prozessauslegung beim Expansionsspritzgießen

    Rajganesh Jegadeesan, X., Friesenbichler, W. & Steinbichler, G., 2010, In: Kunststoffe. p. 204-208

    Research output: Contribution to journal › Article › Research › peer-review

  28. 2009
  29. Published

    Abrasive wear measurements of various polyamide compounds under real-injection molding conditions

    Oláh, L. & Friesenbichler, W., 2009,

    PPS 2009 Programme & Abstracts

    .     p. 56-56

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  30. Published

    Advanced compounding: extrusion of polypropylene nanocomposites using the melt pump

    Kracalik, M., Laske, S., Gschweitl, M., Friesenbichler, W. & Langecker, G., 2009, In: Journal of Applied Polymer Science. 113, p. 1422-1428

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    A Wizard to Get the Processing Conditions for Injection Molds

    Fertschej, A., Friesenbichler, W. & Windhager, W., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  32. Published

    A Wizard to Get the Processing Conditions for Injection Molds

    Fertschej, A., Friesenbichler, W., Windhager, W. & Meister, M., 2009

    Research output: Non-textual form › Web publication/site › Research

  33. Published

    Biopolymer Paper for Laser Printing Applications

    Laske, S., Piontek, M., Friesenbichler, W., Wallner, G., Achatz, P., Burkhalter, R. & Langecker, G., 2009, PPS-25 Program & Abstracts. p. 78-78

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  34. Published

    Biopolymer Paper for Laser Printing Applications: 25th Annual Meeting of the Polymer Processing Society

    Langecker, G., Laske, S., Piontek, M., Friesenbichler, W., Wallner, G., Achatz, P. & Burkhalter, R., 2009

    Research output: Non-textual form › Web publication/site › Research

  35. Published

    Demolding Forces and Coefficients of Friction in Injection Molding. A new Mold and first results

    Berger, G., Friesenbichler, W., Schöfer, G. & Freudenschuß, G., 2009, In: Purasuchikkusu-eji = Plastics age. 55, p. 87-94

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    Demolding forces and coefficients of friction in injection molding. A new practical measurement apparatus

    Berger, G. & Friesenbichler, W., 2009, Proceedings of ANTEC 2009. p. 1699-1703

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  37. Published

    Estimation of reinforcement in compatibilized polypropylene nanocomposites by extensional rheology

    Laske, S., Kracalik, M., Gschweitl, M., Feuchter, M., Maier, G., Pinter, G., Thomann, R., Friesenbichler, W. & Langecker, G., 2009, In: Journal of Applied Polymer Science. 111, p. 2253-2259

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    Estimation of reinforcement in compatibilized polypropylene nanocomposites by extensional rheology

    Laske, S., Kracalik, M., Gschweitl, M., Feuchter, M., Maier, G., Pinter, G., Thomann, R., Friesenbichler, W. & Langecker, G., 2009, In: VLK-News. 17. Jahrg., p. 6-8

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    Influence of cavity pressure and injection rate on the surface roughness of PP, PC, ABS and ABS-PC

    Pacher, G., Berger, G. & Friesenbichler, W., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  40. Published

    Influence of cavity pressure and injection rate on the surface roughness of PP, PC, ABS and ABS-PC

    Pacher, G., Berger, G. & Friesenbichler, W., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  41. Published

    Influence on Demolding in Injection Moulding

    Berger, G. & Friesenbichler, W., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  42. Published

    Influence on Demolding in Injection Moulding

    Berger, G. & Friesenbichler, W., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  43. Published

    Influences of steel grade and surface roughness on demolding forces in injection molding

    Berger, G., Friesenbichler, W. & Perko, J., 2009, Proceedings TOOL09. p. 25-37

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  44. Published

    Influences of Surface Roughness and Polypropylene Grade on Demolding Forces and Coefficients of Friction

    Berger, G., Friesenbichler, W., Burgsteiner, M. & Lorenz, B., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  45. Published

    Influences of Surface Roughness and Polypropylene Grade on Demolding Forces and Coefficients of Friction

    Berger, G., Friesenbichler, W. & Burgsteiner, M., 2009

    Research output: Non-textual form › Web publication/site › Research

  46. Published

    Measurement of pressure dependent viscosity and its influence on injection moulding simulation

    Holzer, C., Lucyshyn, T., Friesenbichler, W. & Duretek, I., 2009,

    Programme & Abstracts of PPS 2009

    .     p. 153-153

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  47. Published

    New Rheological Injection Mould to Measure Pressure Dependent Viscosity in High Shear Rate Range

    Friesenbichler, W., Rajganesh Jegadeesan, X., Duretek, I. & Ramesh Kumar, S., 2009,

    PPS-25 Program & Abstracts

    .     p. 185-185

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  48. Published

    Physical Model for the Expansion Injection Molding Process and Degradation Effects on the Injection Molded Parts due to Extreme Processing Conditions

    Jegadeesan, R., Friesenbichler, W., Langecker, G. & Steinbichler, G., 2009

    Research output: Non-textual form › Web publication/site › Research

  49. Published

    Pressure dependent viscosity and its importance for injection molding simulations

    Rajganesh Jegadeesan, X., Friesenbichler, W., Duretek, I., Filz, P. & Webelhaus, K., 2009, Conference Proceedings. p. 217-222

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  50. Published

    Replication of a draw-polished cavity surface into PP and PC. Influence of flow length, wall thickness and injection molding parameters

    Burgsteiner, M., Berger, G. & Friesenbichler, W., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  51. Published

    Replication of a draw-polished cavity surface into PP and PC. Influence of flow length, wall thickness and injection molding parameters

    Burgsteiner, M., Berger, G. & Friesenbichler, W., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  52. Published

    Semi-industrial approach for wear measurement in injection moulds

    Friesenbichler, W. & Oláh, L., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  53. Published

    Structure Replication in Injection Moulding

    Berger, G. & Friesenbichler, W., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  54. Published

    Structure Replication in Injection Moulding

    Berger, G. & Friesenbichler, W., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  55. Published

    Temperature and Pressure Dependence of Thermal Conductivity of Polypropylene Filled with Micro-Scale Fillers

    Duretek, I., Friesenbichler, W. & Kucher, C., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  56. Published

    Temperature and Pressure Dependence of Thermal Conductivity of Polypropylene Filled with Micro-Scale Fillers

    Duretek, I., Friesenbichler, W. & Kucher, C., 2009, Proceedings of a Conference on Polyolefins and Polymelamines. p. 96-98

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  57. Published

    Thermal Conductivity of Talc Filled Polypropylene Measured at High Pressures

    Duretek, I., Friesenbichler, W. & Kucher, C., 2009, PPS-25 Program & Abstracts . p. 135-135

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  58. Published

    Thermal Conductivity of Talc Filled Polypropylene Measured at High Pressures: 25th Annual Meeting of the Polymer Processing Society

    Duretek, I., Friesenbichler, W. & Kucher, C., 2009

    Research output: Non-textual form › Web publication/site › Research

  59. Published

    Viskositätsdaten für die Spritzgieß-Simulation

    Friesenbichler, W., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  60. Published

    Wear of plastic mold steels under injection molding conditions

    Oláh, L. & Friesenbichler, W., 2009, In: Transactions of FAMENA. 33, p. 15-24

    Research output: Contribution to journal › Article › Research › peer-review

  61. 2008
  62. Published

    Advanced Compounding - Einsatz einer Schmelzepumpe und In-Line NIR Messtechnik für die Aufbereitung von Polypropylen Nanocomposites

    Kracalik, M., Laske, S., Feuchter, M., Maier, G., Pinter, G., Friesenbichler, W. & Langecker, G., 2008, Effizienz im Blickpunkt; Fakten - Technik - Konsequenzen. p. 1-21

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  63. Published

    Advanced Compounding of Polymer Nanocomposites: Assembling a Melt Pump and In-line Near Infrared Spectroscopy into Extrusion Line

    Kracalik, M., Laske, S., Feuchter, M., Maier, G., Pinter, G., Friesenbichler, W. & Langecker, G., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  64. Published

    A new practical measurement for demolding forces and coefficients of friction in injection molding

    Berger, G., Friesenbichler, W., Schöfer, G. & Freudenschuß, G., 2008, Proceeding of the PPS-24. p. 1-7

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  65. Published

    New Insights into Feedstock Behaviour and Injection Moulding Simulation for PIM

    Kukla, C., Duretek, I., Friesenbichler, W. & Thornagel, M., 2008, Euro PM2008 Proceedings Vol 2. p. 287-292

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  66. Published

    Optimization of Compatibilizer Admixture in Polypropylene-Organclay Nanocomposites by Extensional Rheology

    Kracalik, M., Laske, S., Feuchter, M., Maier, G., Pinter, G., Friesenbichler, W. & Langecker, G., 2008, ASPM 2008 - 9th Austrian Polymer Meeting - Book of Abstracts. p. 43-43

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  67. Published

    Qualitätsgesicherte Aufbeereitung von Polymer-Nanocomposites unter Verwendung von in-line NIR-Spektroskopie

    Friesenbichler, W., Kracalik, M. & Laske, S., 2008, Extrusion - Rheologie und neue Technolgien zur Steigerung der Produktvität - Fortbildungsseminar. p. 1-16

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  68. 2007
  69. Published

    Investigations of the Rheology and Reactivity of Extrudable Wood-Resin Compounds

    Braun, J., Duretek, I., Müller, U., Friesenbichler, W. & Endesfelder, A., 3 Apr 2007, In: Monatshefte für Chemie = Chemical monthly. 138.2007, p. 337-341 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  70. Published

    Simulation des spritzgießprozesses von mikrobauteilen

    Cramer, A., Michaeli, W., Friesenbichler, W. & Duretek, I., 1 Jan 2007, In: Zeitschrift Kunststofftechnik = Journal of plastics technology. 1

    Research output: Contribution to journal › Article › Research › peer-review

  71. Published

    Abrasive/corresive wear on plastic mold steels, measured under practical processing conditions

    Friesenbichler, W., 2007.

    Research output: Contribution to conference › Poster › Research › peer-review

  72. Published

    Abrasive/corresive wear on plastic mold steels, measured under practical processing conditions

    Friesenbichler, W., Berger, G. & Perko, J., 2007, PPS-23 Program and Book of Abstracts. p. 176-176

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  73. Published

    Abrasive/corresive wear on plastic mold steels, measured under practical processing conditions: PPS-23 The Polymer Processing Society 23rd Annual Meeting

    Friesenbichler, W., Berger, G. & Perko, J., 2007

    Research output: Non-textual form › Web publication/site › Research

  74. Published

    Charakterisierung von Spritzgieß-Formteiloberflächen

    Berger, G., Friesenbichler, W. & Gruber, D. P., 2007, In: KC-aktuell (Informationen aus dem Kunstoff-Cluster). p. 2-3

    Research output: Contribution to journal › Article › Research › peer-review

  75. Published

    Fast Determination of Reinforcement in Polymer Nanocomposites

    Kracalik, M., Laske, S., Gschweitl, M., Feuchter, M., Maier, G., Pinter, G., Friesenbichler, W. & Langecker, G., 2007, NanoEurope 2007. p. 13-14

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  76. Published

    Simulation der Spritzgießprozesses von Mikrobauteilen

    Cramer, A., Michaeli, W., Friesenbichler, W. & Duretek, I., 2007, In: Zeitschrift Kunststofftechnik : Journal of plastics technology. 3, p. 1-26

    Research output: Contribution to journal › Article › Research › peer-review

  77. 2006
  78. Published

    19. Leobener Kunststoff Kolloquium - Spritzgieß- und Extrusionstechnik - Innovationen aus Industrie und Forschung

    Friesenbichler, W. (Editor) & Laske, S. (Editor), 2006, Eigenverlag.

    Research output: Book/Report › Book › Research

  79. Published

    Abrasive/corresive Wear on Plastic Mould Steels, measured under practical conditions

    Friesenbichler, W., Langecker, G. & Caliskanoglu, D., 2006, Tooling Materials and their applications from research to market. p. 267-290

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  80. Published

    A new practical testing apparatus to evaluate corrision on plastic mold steel

    Friesenbichler, W., Berger, G., Langecker, G., Caliskanoglu, D., Hiebeler, B. J. & Perko, J., 2006, Tooling materials and their applications from research to market. p. 291-298

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  81. Published

    Detection of Surface Structure and Appearance of Injection Molded Parts.

    Langecker, G., Friesenbichler, W., Berger, G. R. & Gruber, D., 2006, Program and Abstracts of the 22nd Annual Meeting of the Polymer Processing Society, Yamagata, Japan 2006. p. 218-218

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  82. Published

    Forschung für die Praxis am Institut für Kunststoffverarbeitung - Ausewählte Beispiele aus den Arbeiten der letzten 17 Jahre

    Friesenbichler, W., 2006, 19. Leobener Kunststoff Kolloquium - Spritzgieß- und Extrusionstechnik - Innovationen aus Industrie und Forschung. p. 1-36

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  83. Published

    Hochglanzoberflächen von Spritzgussteilen, Herstellung und Charakterisierung

    Friesenbichler, W., Langecker, G., Berger, G., Reitter, M. & Jutz, S., 2006, 19. Leobener Kunststoff Kolloqium - Spritzgieß- und Extrusionstechnik - Innovationen aus Industrie und Forschung. p. 1-16

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  84. Published

    Investigation of the rheology and reactivity of extrudable wood-resin-compounds

    Braun, J., Duretek, I., Müller, U., Friesenbichler, W. & Endesfelder, A., 2006.

    Research output: Contribution to conference › Poster › Research › peer-review

  85. Published

    Praxisnahe Prüfmethoden für die Messung des abrasiven und korrosiven Verschleißes

    Friesenbichler, W., Berger, G. & Perko, J., 2006, 19. Leobener Kunststoff Kolloquium - Spritzgieß- und Extrusionstechnik - Innovationen aus Industrie und Forschung. p. 1-21

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  86. Published

    Praxisnahe Verschleißprüfung

    Friesenbichler, W., 2006.

    Research output: Contribution to conference › Poster › Research › peer-review

  87. Published

    Study on rheological behaviour of polymer melts at high shear rates using a new micro-rheology technique

    Duretek, I., Friesenbichler, W., Schuschnigg, S., Jegadeesan, R. & Langecker, G., 2006, Past and future of polymer engineering technology and science. p. 117-130

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  88. Published

    Study on rheological behaviour of polymer melts at increased pressure levels with the consideration of the compression heat

    Rajganesh Jegadeesan, X., Friesenbichler, W., Duretek, I., Schuschnigg, S. & Langecker, G., 2006, The Chain of Knowledge - From Catalyst to Application. p. 1-1

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  89. Published

    Viskositätsmessungen bei extrem hohen Schergeschwindigkeiten unter Berücksichtigung von Schererwärmung und Druckeinfluss

    Duretek, I., Friesenbichler, W., Schuschnigg, S. & Rajganesh Jegadeesan, X., 2006, 19. Leobener Kunststoff Kolloquium - Spritzgieß- und Extrusionstechnik - Innovationen aus Industrie und Forschung. p. 1-20

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  90. 2005
  91. Published

    Investigation of Flow Behaviour of Extrudable Wood/Melamine Resin Composites

    Nguyen, H. L., Duretek, I., Müller, U., Friesenbichler, W. & Endesfelder, A., 2005.

    Research output: Contribution to conference › Poster › Research › peer-review

  92. Published

    Investigation of Flow Behaviour of Extrudable Wood/Melamine Resin Composites

    Nguyen, H. L., Duretek, I., Müller, U., Friesenbichler, W. & Endesfelder, A., 2005, Proceedings of the 2nd Annual European Rheology Conference. p. ---

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  93. Published

    Polymer Melt Rheology at High shear rates Using a New Micro-Rheology Technique,

    Friesenbichler, W., Langecker, G., Duretek, I. & Schuschnigg, S., 2005, Proceeding of the 21st Annual Meeting of the Polymer Processing Society. p. 87--

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  94. 2004
  95. Published

    Rheological Characterization of Extrudable Wood/Melamine Resin Composites

    Müller, U., Nguyen, H. L., Rätzsch, M., Duretek, I. & Friesenbichler, W., 2004.

    Research output: Contribution to conference › Poster › Research › peer-review

  96. 1998
  97. Published

    Rheological measurements on the by-pass-extrusion rheometer at flexible polyvinylchloride

    Duretek, I., Friesenbichler, W. & Langecker, G., 1998, Application and processing of plastics and rubber. p. 31-35

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  98. 1996
  99. Published

    Auswirkung der Versuchsparameter auf die Meßergebnisse von p-v-T-Diagrammen für Thermoplaste und Kautschuke

    Duretek, I., Langecker, G. & Friesenbichler, W., 1996, In: Polimeri. 17, p. 177-182

    Research output: Contribution to journal › Article › Research › peer-review

  100. 1995
  101. Published

    Auswirkung der Versuchsparameter auf die Messergebnisse von pvT-Diagrammen für Thermoplaste und Kautschuke

    Duretek, I., Langecker, G. & Friesenbichler, W., 1995, 13.Days of Plastics and Rubber Engineers Society. p. 66-69

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Previous 1 2 3 Next
View graph of relations

Latest Research Output

View more (290)