Walter Friesenbichler

(Former)

51 - 100 out of 290Page size: 50

Research output

  1. 2017
  2. Published

    Strömungs- und Temperaturverhältnisse in der Kautschuk-Plastifiziereinheit

    Kerschbaumer, R., Lechner, B., Graninger, G. & Friesenbichler, W., Apr 2017, 26. Leobener Kunststoff-Kolloquium 20. und 21. April 2017: Schriftenreihe Kunststofftechnik. Friesenbichler, W. & Berger, G. (eds.). Leoben, Vol. 7. p. 155-164 10 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  3. Published

    THE IMPORTANCE OF VISCOELASTICITY AND PRESSURE DEPENDENCE OF VISCOSITY FOR SIMULATION OF MELT FLOW IN INJECTION MOLDING AND CAPILLARY RHEOMETRY

    Friesenbichler, W., Neunhäuserer, A., Fasching, M. A. & Mitsoulis, E., Apr 2017

    Research output: Non-textual form › Digital or Visual Products › Research

  4. Published

    Verbesserung der Wärmeleitfähigkeit von HDPE durch Einsatz mikro- und nanoskaliger Füllstoffe

    Stieger, S., Berger, G., Battisti, M. & Friesenbichler, W., Apr 2017, 26. Leobener Kunststoff-Kolloquium 20. und 21. April 2017: Schriftenreihe Kunststofftechnik. Friesenbichler, W. & Berger, G. (eds.). Leoben, Vol. 7. p. 247-248 2 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  5. Published

    Flow behaviour of rubber in capillary and injection moulding dies

    Mitsoulis, E., Battisti, M., Neunhäuserer, A., Perko, L., Friesenbichler, W., Ansari, M. & Hatzikiriakos, S. G., 5 Mar 2017, In: Plastics, rubber and composites. 46.2017, 3, p. 110-118 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    Determination of Thermal Conductivity of an Industrial Rubber Compound: Challenges, Problems and Comparison of Different Test Methods

    Kerschbaumer, R., Lechner, B., Tscharnutter, D., Wanner, A. J. & Friesenbichler, W., 2017, Conference Proceedings of the RubberCon.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  7. Published

    Flow Behavior of PP-Polymer Nanocomposites in Capillary and Injection Molding Dies

    Mitsoulis, E., Battisti, M., Neunhäuserer, A., Perko, L. & Friesenbichler, W., 2017, In: International polymer processing. 32.2017, 2, p. 217-226 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  8. 2016
  9. Published

    Visualization of the Inlet Flow Behavior for Different Rubber Compounds using various Die Geometries

    Kerschbaumer, R., Perko, L., Lechner, B. & Friesenbichler, W., 28 Oct 2016, p. 1-2. 2 p.

    Research output: Contribution to conference › Presentation › Research › peer-review

  10. Published

    A First Approach to Visualize the Flow Behavior in the Screw Channel for a CSM-Rubber Compound

    Kerschbaumer, R., Lechner, B., Graninger, G., Haselmann, M. & Friesenbichler, W., Oct 2016, p. 1-2. 2 p.

    Research output: Contribution to conference › Paper › peer-review

  11. Published

    A First Approach to Visualize the Flow Behavior in the Screw Channel for a CSM-Rubber Compound

    Kerschbaumer, R., Lechner, B., Graninger, G., Haselmann, M. & Friesenbichler, W., Oct 2016, p. 1-2. 2 p.

    Research output: Contribution to conference › Poster › Research › peer-review

  12. Published

    Visualization of the Inlet Flow Behavior for Different Rubber Compounds using various Die Geometries

    Kerschbaumer, R., Perko, L., Lechner, B. & Friesenbichler, W., Oct 2016, p. 1-2. 2 p.

    Research output: Contribution to conference › Paper › peer-review

  13. Published

    On the Use of Bionic Cooling Structures in Injection Molding

    Berger, G., Zorn, D., Bodor, C., Friesenbichler, W. & Bevc, F., 22 Sept 2016, p. 155-161. 7 p.

    Research output: Contribution to conference › Presentation › Research › peer-review

  14. Published

    On the Use of Bionic Cooling Structures in Injection Molding

    Berger, G., Zorn, D., Bodor, C., Friesenbichler, W. & Bevc, F., 22 Sept 2016, p. 155-161. 7 p.

    Research output: Contribution to conference › Paper › peer-review

  15. Published

    On the Use of Bionic Cooling Structures in Injection Molding

    Berger, G., Zorn, D., Bodor, C., Friesenbichler, W. & Bevc, F., 22 Sept 2016, Conference Proceedings: 7th bi-annual International Conference of Polymers & Moulds Innovations. Gent, p. 155-161 7 p. 21

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  16. Published

    Simulation of Rubber Injection Molding - Challenges and Limitations

    Friesenbichler, W., Berger, G. & Fasching, M., 22 Sept 2016, p. 179-183. 4 p.

    Research output: Contribution to conference › Paper › peer-review

  17. Published

    Simulation of Rubber Injection Molding - Challenges and Limitations

    Friesenbichler, W., Berger, G. & Fasching, M., 22 Sept 2016, p. 179-183. 4 p.

    Research output: Contribution to conference › Presentation › Research › peer-review

  18. Published

    Simulation of Rubber Injection Molding - Challenges and Limitations

    Friesenbichler, W., Berger, G. & Fasching, M., 22 Sept 2016, Conference Proceedings: 7th bi-annual International Conference of Polymer & Moulds Innovations. Gent, p. 179-183 4 p. 34

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  19. Published

    Using elongational flow to enhance the properties of polypropylene nanocomposites

    Arunachalam, S., Battisti, M., Perko, L., Stieger, S. & Friesenbichler, W., 4 Aug 2016, In: SPE Plastics Research Online / Society of Plastic Engineers. 2016, 4 p.

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    A New Device for Measuring Shear Viscosity of Rubbers on a Rubber Injection Molding Machine

    Fasching, M., Friesenbichler, W., Leitner, E. & Berger, G., Jul 2016, p. 1-5. 5 p.

    Research output: Contribution to conference › Paper › peer-review

  21. Published

    Characterization of the Temperature Profile during Dosing of Different Rubber Compounds under Steady State Conditions by Means of a Specially Designed Screw Test Stand

    Kerschbaumer, R., Lechner, B., Graninger, G. & Friesenbichler, W., Jul 2016, p. 1-5. 5 p.

    Research output: Contribution to conference › Paper › peer-review

  22. Published

    Influence of Processing Conditions and Filler Type and on the Crystallinity of PLA Compounds

    Pacher, G., Hutterer, T., Berger, G. & Friesenbichler, W., Jul 2016, p. 1-5. 5 p.

    Research output: Contribution to conference › Paper › peer-review

  23. Published

    Development for Manufacturing Practice - Example Leoben

    Friesenbichler, W., 23 Jun 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  24. Published

    Rheometry of Polymer Melt using Processing Machines

    Friesenbichler, W., Neunhäuserer, A. & Duretek, I., 19 May 2016, p. 2-5. 4 p.

    Research output: Contribution to conference › Presentation › Research › peer-review

  25. E-pub ahead of print

    A novel online rheometer for elongational viscosity measurement of polymer melts

    Köpplmayr, T., Luger, H.-J., Burzic, I., Battisti, M., Perko, L., Friesenbichler, W. & Miethlinger, J., 23 Jan 2016, (E-pub ahead of print) In: Polymer Testing. 50.2016, April, p. 208-215 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    A study on the role of wetting parameters on friction in injection moulding

    Berger, G. R., Steffel, C. & Friesenbichler, W., 2016, In: International Journal of Materials and Product Technology. 52, 1-2, p. 193-211 19 p.

    Research output: Contribution to journal › Article › Research › peer-review

  27. Published

    Determination of a robust process for a union nut. Why d-optimal DoE did not solve random impact behavior?

    Steffel, C., Berger, G. & Friesenbichler, W., 2016, In: AIP Conference Proceedings. 1779

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    Influence of elongational flow generating nozzles on material properties of polypropylene nanocomposites. Part I

    Battisti, M., Perko, L., Arunachalam, S., Stieger, S. & Friesenbichler, W., 2016, In: Polymer engineering and science. p. n/a-n/a

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    Optimization of twin screw extrusion using CFD for polymer/nanoclay composites

    Schuschnigg, S., Battisti, M., Winkler-Ebner, J., Friesenbichler, W. & Holzer, C., 2016, In: AIP Conference Proceedings.

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    Rheometry of polymer melts using processing machines

    Friesenbichler, W., Neunhäuserer, A. & Duretek, I., 2016, In: Korea-Australia Rheology Journal. 28, 3, p. 167-174 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    Rheometry of Polymer Melt using Processing Machines

    Friesenbichler, W., Neunhäuserer, A. & Duretek, I., 2016, The 16th Internaional Symposium on Applied Rheology (ISAR). Korea, p. 2-5 4 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  32. Published

    Vorrichtung und Verfahren zum Faserspritzgießen von Spritzgießteilen

    Petschnig, A. (Inventor), Rojach, M. (Inventor), Friesenbichler, W. (Inventor), Bodor, C. (Inventor), Bevc, F. (Inventor), Berger, G. (Inventor) & Schadler, W. (Inventor), 2016, 3 Dec 2015, Priority No. WO2015181296A1

    Research output: Patent

  33. 2015
  34. Published

    Methoden zur Bestimmung des Vernetzungsgrads an Kautschukformteilen

    Friesenbichler, W. & Fasching, M., 5 Nov 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  35. Published

    Methoden zur Bestimmung des Vernetzungsgrads an Kautschukformteilen

    Friesenbichler, W. & Fasching, M., 5 Nov 2015, Proceedings Rubber meets Science. 5 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  36. Published

    Potentiale der Schlitzdüsenrheometrie für die rheologische Charakterisierung von Kunststoffschmelzen und -compounds

    Friesenbichler, W., Nov 2015, 24. Leobener Kunststoff-Kolloquium: Festkolloquium Kunststoffverarbeitung GRL 75. Leoben, Vol. 24. p. 37-56

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  37. Published

    An Investigation of Mechanical and Thermal Properties of Polypropylene Clay Nanocomposites Containing Different Nanoclays

    Arunachalam, S., Battisti, M. G., Vijayakumar, C. T. & Friesenbichler, W., 1 Oct 2015, In: Macromolecular materials and engineering. 300, 10, p. 966-976 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    A Study on Material Optimization for Polypropylene Nanocomposites Based On Layered Silicates Using Elongational Flow Devices

    Neunhäuserer, A., Friesenbichler, W. & Battisti, M., 23 Sept 2015, p. 28. 1 p.

    Research output: Contribution to conference › Presentation › Research › peer-review

  39. Published

    A Study On Optimization Of Mechanical Properties for Polypropylene Nanocomposites Based On Layered Silicates Using Extensional Flow Inducing Multinozzle Systems

    Neunhäuserer, A., Battisti, M. & Friesenbichler, W., 23 Sept 2015, p. 26. 1 p.

    Research output: Contribution to conference › Presentation › Research › peer-review

  40. Published

    Optimization of Twin Screw Extrusion using CFD for Polymer/Nanoclay Composites: Polymer Processing Society Regional Conference Graz 2015 Book of Abstracts

    Schuschnigg, S., Battisti, M., Winkler-Ebner, J., Friesenbichler, W. & Holzer, C., 21 Sept 2015, p. 182.

    Research output: Contribution to conference › Abstract

  41. Published

    Regional Conference Polymer Processing Society - Book of Abstracts

    Friesenbichler, W., Sept 2015, Eigenverlag. 336 p.

    Research output: Book/Report › Anthology › Research

  42. Published

    Potential for Cure Time Reduction in Rubber Injection Molding and its Analytical Prediction

    Friesenbichler, W., Perko, L. & Fasching, M., 2 Jul 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  43. Published

    Cartucho explosivo

    Moser, P. (Inventor), Bauer, F. (Inventor), Friesenbichler, W. (Inventor), Fertschej, A. (Inventor) & Schatzer, R. (Inventor), 25 Jun 2015, IPC No. F42D 1/ 10 A I, Patent No. ES2538987T, Priority date 25 Mar 2011, Priority No. WO2011EP54635

    Research output: Patent

  44. Published

    A Study on Material Optimization for Polypropylene Nanocomposites Based On Layered Silicates Using Elongational Flow Devices

    Friesenbichler, W., Battisti, M. & Neunhäuserer, A., 11 Jun 2015. 1 p.

    Research output: Contribution to conference › Presentation › Research › peer-review

  45. Published

    A Study on Material Optimization for Polypropylene Nanocomposites Based On Layered Silicates Using Elongational Flow Devices

    Friesenbichler, W., Battisti, M. & Neunhäuserer, A., 11 Jun 2015, Proceedings of the PPS-31. 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  46. Published

    Slit-die Rheometry and its Potential in Polymer Melt Rheology

    Friesenbichler, W., Perko, L. & Fasching, M., 11 Jun 2015. 1 p.

    Research output: Contribution to conference › Presentation › Research › peer-review

  47. Published

    Slit-die Rheometry and its Potential in Polymer Melt Rheology

    Friesenbichler, W., Perko, L. & Fasching, M., 11 Jun 2015, Proceedings of the PPS-31. 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  48. Published

    Potential for Cure Time Reduction in Rubber Injection Molding and its Analytical Prediction

    Friesenbichler, W. & Perko, L., 9 Jun 2015. 1 p.

    Research output: Contribution to conference › Presentation › Research › peer-review

  49. Published

    Potential for Cure Time Reduction in Rubber Injection Molding and its Analytical Prediction

    Friesenbichler, W. & Perko, L., 9 Jun 2015, Proceedings of the PPS-31. 1 p. S12-226

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  50. Published

    Verkürzung der Vulkanisationszeit bei der Elastomerverarbeitung

    Perko, L. & Friesenbichler, W., 1 Jun 2015, In: GAK : Gummi, Fasern, Kunststoffe. 68, 6, p. 431-435 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  51. Published

    Potential for Cure Time Reduction in Rubber Injection Molding and its Analytical Prediction

    Friesenbichler, W., Perko, L. & Fasching, M., Jun 2015, Proceedings of the IRC and DKT 2015; ME E T ING POINT OF THE RUB B E R INDUS T R Y.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  52. Published

    Virtual Modelling of the Rubber Injection Molding Process including Verification in Industrial Scale Experiments

    Fasching, M., Friesenbichler, W. & Berger, G., Jun 2015, Proceedings of the IRC and DKT 2015; ME E T ING POINT OF THE RUB B E R INDUS T R Y.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  53. Published

    Short-term and long-term behavior of PP-polymer nanocomposites produced by injection molding compounding

    Battisti, M. G., Guttmann, P., Chitu, L. & Friesenbichler, W., 22 May 2015, Proceedings of PPS-30: The 30th International Conference of the Polymer Processing Society - Conference Papers. Vol. 1664. 700041

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Previous 1 2 3 4 5 6 Next
View graph of relations

Latest Research Output

View more (290)