Walter Friesenbichler

(Former)

101 - 200 out of 290Page size: 100

Research output

  1. 2015
  2. Published

    Improving the mechanical behavior of polypropylene nanocomposites

    Battisti, M., Arunachalam, S. & Friesenbichler, W., May 2015, In: SPE Plastics Research Online / Society of Plastic Engineers. 10.2417, 005891, p. 1-3

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    Reduction of cure time in elastomer processing

    Perko, L. & Friesenbichler, W., May 2015, In: Rubber, fibres, plastics international. Issue 02/2015, p. 117-121 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  4. Published

    Correlation between Rheotens measurements and reinforcement of polymer nanocomposites in the injection molding compounder

    Battisti, M. G., Friesenbichler, W., Duretek, I. & Guttmann, P., 15 Apr 2015, In: Journal of physics / Conference series. 602, 1, 012012.

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    IMPROVEMENT OF MECHANICAL BEHAVIOR OF POLYPROPYLENE NANOCOMPOSITES VARYING NANOCLAYS AND COMPATIBILIZERS(Nanocomposites II)

    Battisti, M., Arunachalam, S. & Friesenbichler, W., 24 Mar 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  6. Published

    PräzisionsteileIntegrativ entwickelte Präzisionsteile

    Friesenbichler, W., Jan 2015.

    Research output: Contribution to conference › Presentation › Research

  7. Published

    Advanced Mold Concepts to Improve Part Quality and Productivity in Rubber Injection Molding

    Fasching, M., Friesenbichler, W., Pacher, G. & Berger, G., 2015, Polymer Processing Society Graz 2015 - Book of Abstract. p. 49 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  8. Published

    A Study on Material Optimization for Polypropylene Nanocomposites Based On Layered Silicates Using Elongational Flow Devices

    Friesenbichler, W., Battisti, M. & Neunhäuserer, A., 2015, Polymer Processing Society Graz 2015 - Book of Abstracts. p. 28 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  9. Published

    A Study On Optimization Of Mechanical Properties for Polypropylene Nanocomposites Based On Layered Silicates Using Extensional Flow Inducing Multinozzle Systems

    Neunhäuserer, A., Battisti, M. & Friesenbichler, W., 2015, Polymer Processing Society Graz 2015 - Book of Abstracts. p. 26 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  10. Published

    Change of Processing Behavior of Rubbers in Injection Molding caused by Material Storage

    Fasching, M., Friesenbichler, W. & Berger, G., 2015, Polymer Processing Society Graz 2015 - Book of Abstract. p. 103 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  11. Published

    Determination of a robust process for a union nut. Why doptimal DoE did not solve random impact behavior?

    Steffel, C., Berger, G. & Friesenbichler, W., 2015, Polymer Processing Society Graz 2015 - Book of Abstract. p. 52 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  12. Published

    Determination of a robust process for a union nut. Why doptimal DoE did not solve random impact behavior?

    Steffel, C., Berger, G. & Friesenbichler, W., 2015, p. 52. 1 p.

    Research output: Contribution to conference › Presentation › Research › peer-review

  13. Published

    First integrated human like machine vision system for the surface inspection of curved injection molded parts

    Gruber, D., Altenbuchner, T., Macher, J. & Friesenbichler, W., 2015, Polymer Processing Society Graz 2015 - Book of Abstract. p. 48 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  14. Published

    Improvement of mechanical behavior of polypropylene nanocomposites varying nanoclays and compatibilizers

    Battisti, M. G., Sundaresan, A., Guttmann, P. & Friesenbichler, W., 2015, ANTEC 2015 - Proceedings of the Annual Technical Conference and Exhibition of the Society of Plastics Engineers. p. 532-536 5 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  15. Published

    IMPROVEMENT OF MECHANICAL BEHAVIOR OF POLYPROPYLENE NANOCOMPOSITES VARYING NANOCLAYS AND COMPATIBILIZERS(Nanocomposites II)

    Battisti, M., Arunachalam, S. & Friesenbichler, W., 2015, Proceedings of the ANTEC 2015.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  16. Published

    Influence of Rapid Heat Cycle Molding and Filler Type on Part Warpage of PP-based compounds

    Pacher, G., Berger, G., Gruber, D. & Friesenbichler, W., 2015, Polymer Processing Society Graz 2015 - Book of Abstract. p. 50 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  17. Published

    Inline Detection of Material Storage Effects on Processing Behavior of Rubber Compounds

    Fasching, M., Berger, G. & Friesenbichler, W., 2015, Proceedings of the ANTEC 2015.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  18. Published

    Material modelling of PPA-CF30 with fiber data from μCT and injection moulding simulation

    Bodor, C., Tscharnuter, D. & Friesenbichler, W., 2015, Polymer Processing Society Graz 2015 - Book of Abstract. p. 152 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  19. Published

    On the Use of Interfacial Tension Parameter to Predict Reduction of Friction by Mold Coatings in Injection Molding of Polyamide 6

    Berger, G., Steffel, C. & Friesenbichler, W., 2015, p. 51. 1 p.

    Research output: Contribution to conference › Presentation › Research › peer-review

  20. Published

    On the Use of Interfacial Tension Parameter to Predict Reduction of Friction by Mold Coatings in Injection Molding of Polyamide 6

    Berger, G., Steffel, C. & Friesenbichler, W., 2015, Polymer Processing Society Graz 2015 - Book of Abstract. p. 51 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  21. Published

    Robust process control for rubber injection moulding with use of systematic simulations and improved material data

    Fasching, M., Berger, G., Friesenbichler, W., Filz, P. & Helbich, B., 2015, In: International Polymer Science and Technology. 42, 3, p. T1-T3

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Simulation Aided Twin Screw Optimization for Polymer Nanoclay Composites

    Schuschnigg, S., Battisti, M., Joachim, W.-E., Friesenbichler, W. & Holzer, C., 2015, Danube Vltava Sava Polymer Meeting-DVSPM 2015 : Proceedings of a Conference on Polymer Science. Linz, p. 88 O13

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  23. Published

    Visualization of Flow Patterns and Dead Volume in Rubber Processing by Means of Capillary Rheometry with various Die Geometries

    Kerschbaumer, R., Lechner, B., Perko, L. & Friesenbichler, W., 2015, Polymer Processing Society Graz 2015 - Book of Abstract. p. 78 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  24. 2014
  25. Published

    Robuste Prozessführung beim Kautschukspritzgießen unter Nutzung systematischer Simulation und verbesserter Materialdaten

    Fasching, M., Berger, G., Friesenbichler, W., Filz, P. & Helbich, B., Oct 2014, In: GAK : Gummi, Fasern, Kunststoffe. 10/2014, p. 640-644 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    ВЗРЫВНОЙ ПАТРОН

    Bauer, F. (Inventor), Moser, P. (Inventor), Friesenbichler, W. (Inventor), Schatzer, R. (Inventor) & Fertschej, A. (Inventor), 27 Apr 2014, IPC No. F42B 3/ 087 A I, Patent No. RU2012145175, Priority date 25 Mar 2011, Priority No. WO2011EP54635

    Research output: Patent

  27. Published

    Einsatz der Simulation in der systematischen Bauteilentwicklung

    Berger, G. & Friesenbichler, W., 27 Feb 2014, p. 1-38. 38 p.

    Research output: Contribution to conference › Presentation › Research › peer-review

  28. Published

    A Novel Sink Mark Model for High Gloss Injection Molded Parts - Correlation of Deflectometric and Topographic Measurements

    Macher, J., Gruber, D. P., Altenbuchner, T., Pacher, G., Berger, G. & Friesenbichler, W., 2014, In: Polymer Testing. 39, p. 12-19

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    Chapter 12: Injection Molding Compounding of Polymer Nanocomposites

    Battisti, M. & Friesenbichler, W., 2014, New Developments in Polymer Composites Research. p. 301-324

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  30. Published

    Detection of Visually Perceptible Sink Marks on High Gloss Injection Molded Parts by Phase Measuring Deflectometry

    Macher, J., Gruber, D. P., Altenbuchner, T., Pacher, G., Berger, G. & Friesenbichler, W., 2014, In: Polymer Testing. p. 42-48

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    Determination of a Robust Process Setting for an Injection Molded Mirror Drive Component Using D-Optimal DoE

    Berger, G., Friesenbichler, W., Luger, H.-J., Gierth, M., Beytollahi, I. & Filz, P., 2014, 30th International Conference of the Polymer Processing Scociety: DIGITAL BOOK OF ABSTRACTS AND CONFERENCE PAPERS. p. 10-390

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  32. Published

    Elongational flow generating devices for the improvement of mechanical properties of PP-PNCs

    Friesenbichler, W., Battisti, M., Chitu, L. & Feuchter, M., 2014, 6th International PMI Conference Proceedings. p. 139-143

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  33. Published

    Evaluation of Rubber Injection Molding Simulation by Correlation of Simulated Curing Degree to Measureable Part Properties

    Fasching, M., Friesenbichler, W. & Berger, G., 2014, 30th International Conference of the Polymer Processing Scociety: DIGITAL BOOK OF ABSTRACTS AND CONFERENCE PAPERS. p. 11-349

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  34. Published

    Hochqualitative Bauteiloberflächen im Spritzguss – Möglichkeiten und Grenzen der Prozessführung

    Friesenbichler, W. & Berger, G., 2014, Tagungsband: Spritzgießen & Veredeln; Produktion funktioneller, hochwertiger Oberflächen. Deutschland: Carl Hanser Verlag GmbH & Co. KG

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  35. Published

    Influence of mold surface temperature on polymer part warpage in rapid heat cycle molding

    Berger, G. R., Pacher, G. A., Pichler, A., Friesenbichler, W. & Gruber, D. P., 2014, Proceedings of PPS 2013 - 29th International Conference of the Polymer Processing Society, Conference Papers. Vol. 1593. p. 189-194 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  36. Published

    Influence of Thermal Conductivity of PP-Based Compounds on Surface Roughness of Rapid Heat Cycle Injection Molded Parts

    Pacher, G., Geissler, B., Macher, J., Berger, G., Gruber, D. P. & Friesenbichler, W., 2014, 30th International Conference of the Polymer Processing Scociety: DIGITAL BOOK OF ABSTRACTS AND CONFERENCE PAPERS. p. 10-136

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  37. Published

    In-mold sensor concept to calculate process-specific rheological properties

    Pacher, G. A., Berger, G. R., Friesenbichler, W., Gruber, D. P. & Macher, J., 2014, In: AIP Conference Proceedings. 1593, p. 179-182

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    Measurement of the visual perceptibility of sink marks on injection molding parts by a new fast processing model

    Gruber, D. P., Macher, J., Haba, D., Berger, G., Pacher, G. & Friesenbichler, W., 2014, In: Polymer Testing. 33, p. 7-12

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    Model for the Prediction of Bulk Temperature Changes and Pressure Losses in Rubber Compounds Flowing Through Conical Dies: An Engineering Approach: Wiley Online Library - Polymer Engineering & Science

    Perko, L., Fasching, M. & Friesenbichler, W., 2014

    Research output: Non-textual form › Web publication/site › Transfer

  40. Published

    Model for the Prediction of Bulk Temperature Rises and Pressure Losses in Conical Dies for Rubber Compounds – an Engineering Approach

    Perko, L., Fasching, M. & Friesenbichler, W., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  41. Published

    Model for the Prediction of Bulk Temperature Rises and Pressure Losses in Conical Dies for Rubber Compounds – an Engineering Approach

    Perko, L., Fasching, M. & Friesenbichler, W., 2014, 30th International Conference of the Polymer Processing Scociety: DIGITAL BOOK OF ABSTRACTS AND CONFERENCE PAPERS. p. 04-129

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  42. Published

    PP-Polymer Nanocomposites with Improved Mechanical Properties Using Elongational Flow Devices at the Injection Molding Compounder

    Battisti, M. G. & Friesenbichler, W., 2014, In: AIP Conference Proceedings. 1593, p. 195-198

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    Prediction of friction in injection molding by wetting parameters?

    Berger, G., Friesenbichler, W., Steffel, C. & Pacher, G., 2014, 6th International PMI Conference Proceedings. p. 61-66

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  44. Published

    Rapid Heat Cycle Molding, Surface Topography and Visual Appearance of Injection Molded Parts. Research Work in Leoben in the Last 10 Years.

    Berger, G., Friesenbichler, W., Gruber, D. P., Pacher, G. & Macher, J., 2014, ANTEC® 2014 - Proceedings of the Technical Conference & Exhibition. Brown, H. L. & Jones, D. H. (eds.). p. 1700-1705

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  45. Published

    Shear and Extensional Viscosity Measurement for Rubber Compounds by Means of High Pressure Capillary Rheometry

    Friesenbichler, W., Fasching, M. & Perko, L., 2014, 30th International Conference of the Polymer Processing Scociety: DIGITAL BOOK OF ABSTRACTS AND CONFERENCE PAPERS. p. 16-285

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  46. Published

    Short-term and Long-term Behavior of PP-Polymer Nanocomposites Produced by Injection Molding Compounding

    Battisti, M., Guttmann, P., Chitu, L. & Friesenbichler, W., 2014, 30th International Conference of the Polymer Processing Society. p. 649-649

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  47. Published

    Sink mark shape dependin on holdin pressure and rapid heat c clemoldin -mathematical approimation and KE parameters

    Pacher, G. A., Gruber, D. P., Rescher, M., Berger, G. R. & Friesenbichler, W., 2014, 72nd Annual Technical Conference of the Society of Plastics Engineers, ANTEC 2014: The Plastics Conference. January ed. Vol. 2. p. 1716-1720 5 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  48. 2013
  49. Published

    EXPLOSIVE CARTRIDGE

    Moser, P. (Inventor), Bauer, F. F. (Inventor), Friesenbichler, W. (Inventor), Fertschej, A. (Inventor) & Schatzer, R. (Inventor), 27 Nov 2013, IPC No. F42D C I, Patent No. ZA201206754, Priority date 25 Mar 2011, Priority No. WO2011EP54635

    Research output: Patent

  50. Published

    Injection-moulding compounding of PP polymer nanocomposites

    Battisti, M. G. & Friesenbichler, W., 25 Nov 2013, In: Strojniski vestnik = Journal of mechanical engineering. 59, 11, p. 662-668 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  51. Published

    SPRENGPATRONE

    Moser, P. (Inventor), Bauer, F. (Inventor), Friesenbichler, W. (Inventor), Fertschej, A. (Inventor) & Schatzer, R. (Inventor), 30 Jan 2013, IPC No. F42D 1/ 10 A I, Patent No. EP2550502, Priority date 25 Mar 2011, Priority No. WO2011EP54635

    Research output: Patent

  52. Published

    A novel method for the characterization of surface defects remarkably close to the human perception

    Gruber, D. P., Pacher, G., Macher, J., Berger, G. & Friesenbichler, W., 2013, 29th International Conference of the Polymer Processing Society. p. 48-48

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  53. Published

    AN OVERVIEW ON RESEARCH WORK IN LEOBEN IN THE FIELDS OF RAPID HEAT CYCLE MOLDING, SURFACE TOPOGRAPHY AND VISUAL APPEARANCE OF INJECTION MOLDED PARTS

    Pacher, G., Berger, G., Gruber, D. P. & Friesenbichler, W., 2013, ADVANCES IN PLASTICS TECHNOLOGY - Conference Papers. p. Paper No. 27

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  54. Published

    Application and Development of Simulation Software in Polymer Processing

    Lucyshyn, T., Müller, F., Schuschnigg, S., Holzer, C., Perko, L., Fasching, M. & Friesenbichler, W., 2013, In: Berg- und hüttenmännische Monatshefte : BHM. 158, p. 200-205

    Research output: Contribution to journal › Article › Research › peer-review

  55. Published

    Application of deflectometry for surface inspection of high-­‐glossy injection-­‐molded facing parts

    Macher, J., Gruber, D. P., Berger, G. & Friesenbichler, W., 2013, THE PROCEEDINGS OF THE AUSTRIAN – SLOVENIAN POLYMER MEETING 2013: ASPM 2013. Ljubljana, p. 93-95

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  56. Published

    Application of D-­optimal design of experiments on process optimization of an automotive part

    Berger, G., Luger, H.-J., Friesenbichler, W., Beytollahi, I., Gierth, M. & Filz, P., 2013, THE PROCEEDINGS OF THE AUSTRIAN – SLOVENIAN POLYMER MEETING 2013. p. 106-108

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  57. Published

    Ausnutzung der Scher- und Dehnerwärmung zur Heizzeitverkürzung; bei der Verarbeitung von Elastomeren

    Perko, L., Friesenbichler, W. & Fasching, M., 2013, In: Österreichische Kunststoff-Zeitschrift. p. 252-254

    Research output: Contribution to journal › Article › Research › peer-review

  58. Published

    Ausnutzung der Scher- und Dehnerwärmung zur Heizzeitverkürzung; bei der Verarbeitung von Elastomeren

    Perko, L., Friesenbichler, W. & Fasching, M., 2013, In: GAK : Gummi, Fasern, Kunststoffe. 66, p. 622-624

    Research output: Contribution to journal › Article › Research › peer-review

  59. Published

    Correlation between Rheotens Measurements and Reinforcement of Polymer Nanocomposites in the Injection Molding Compounder

    Battisti, M., Duretek, I., Friesenbichler, W., Guttmann, P. & Pinter, G., 2013, 1st International Conference on Rheology and Modelling of Materials - Book of Abstracts. p. 39-39

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  60. Published

    Deformation Analysis of an Automotive Part by Injection Molding Simulation: Influence of Material Data and Mold Modeling on Prediction Quality

    Luger, H.-J., Berger, G., Müller, F., Friesenbichler, W., Beytollahi, I. & Filz, P., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  61. Published

    Deformation Analysis of an Automotive Part by Injection Molding Simulation: Influence of Material Data and Mold Modelling on Prediction Quality

    Luger, H.-J., Berger, G., Müller, F., Friesenbichler, W., Beytollahi, I. & Filz, P., 2013, 29th International Conference of the Polymer Processing Society. p. 59-59

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  62. Published

    Die Wirkung dynamischer Werkzeugtemperierung auf die Oberflächenqualität von Kunststoffteilen

    Pacher, G., Berger, G., Friesenbichler, W. & Gruber, D. P., 2013, 22. Leobener Kunststoff-Kolloquium: Oberlfächen und Grenzflächen in der Polymertechnologie. p. 101-110

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  63. Published

    Elongational viscosity of rubber compounds and improving corresponding models

    Perko, L., Friesenbichler, W., Obendrauf, W., Buchebner, V. & Chaloupka, G., 2013, In: Advances in production engineering & management. 8, p. 126-133

    Research output: Contribution to journal › Article › Research › peer-review

  64. Published

    Influence of material condition on processing of rubber compounds and its representation in simulation

    Fasching, M., Friesenbichler, W. & Berger, G., 2013, THE PROCEEDINGS OF THE AUSTRIAN – SLOVENIAN POLYMER MEETING 2013. p. 75-77

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  65. Published

    Influence of Mold Surface Temperature on Polymer Part Warpage in Rapid Heat Cycle Molding

    Berger, G., Pacher, G., Gruber, D. P., Pichler, A. & Friesenbichler, W., 2013, 29th International Conference of the Polymer Processing Society. p. 49-49

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  66. Published

    INFLUENCE OF PROCESS SETTINGS ON THE TOPOGRAPHY OF SINK MARKS

    Pacher, G., Berger, G., Gruber, D. P. & Friesenbichler, W., 2013, ADVANCES IN PLASTICS TECHNOLOGY - Conference Papers. Gliwice, Polen, p. Paper No. 31

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  67. Published

    In-Mold Sensor Concept to calculate process-specific Rheological Properties

    Pacher, G., Berger, G., Friesenbichler, W., Gruber, D. P. & Macher, J., 2013, 29th International Conference of the Polymer Processing Society. p. 48-48

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  68. Published

    Kosten reduzieren durch systematische Entwicklungsprozesse

    Friesenbichler, W., Gröger, T., Vetschera, R. & Hopmann, C., 2013, In: Kunststoffe. p. 50-53

    Research output: Contribution to journal › Article › Research › peer-review

  69. Published

    Model for the prediction of elegational heating rubber compounds in conical dies

    Perko, L., Fasching, M. & Friesenbichler, W., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  70. Published

    Model for the prediction of elegational heating rubber compounds in conical dies

    Perko, L., Fasching, M. & Friesenbichler, W., 2013, THE PROCEEDINGS OF THE AUSTRIAN – SLOVENIAN POLYMER MEETING 2013. p. 258-259

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  71. Published

    MODEL FOR THE PREDICTION OF SHEAR AND ELONGATIONAL HEATING OF RUBBER COMPOUNDS IN CONICAL DIES

    Perko, L., Fasching, M. & Friesenbichler, W., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  72. Published

    More Gloss, Fewer Weld Lines With Variothermal Molding

    Berger, G., Roock, S., Steinbichler, G., Gießauf, J., Gruber, D. P. & Friesenbichler, W., 2013, In: Plastics technology. 59, 3, p. 30, 60-35, 62

    Research output: Contribution to journal › Article › Research › peer-review

  73. Published

    MULTI-FUNCTIONAL INJECTION MOLD FOR EXAMINING THE INFLUENCE OF RAPID HEAT CYCLE MOLDING ON POLYMER MORPHOLOGY

    Pacher, G., Berger, G. & Friesenbichler, W., 2013, Tagungsband der 3. Tagung Innovation Messtechnik. p. 25-30

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  74. Published

    NEW METHODS FOR QUALITY CONTROL OF INJECTION-MOLDED PARTS

    Macher, J., Gruber, D. P., Berger, G. & Friesenbichler, W., 2013, ANTEC 2013 Conference and Tradeshow. p. 1-4

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  75. Published

    New ways for the characterization of appearance properties of plastic products and components close to human vision

    Gruber, D. P., Berger, G. & Friesenbichler, W., 2013, THE PROCEEDINGS OF THE AUSTRIAN – SLOVENIAN POLYMER MEETING 2013. Ljubljana, p. 11-13

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  76. Published

    PP-Polymer Nanocomposites with improved mechanical properties using elongational flow generating devices at the Injection Molding Compounder

    Friesenbichler, W. & Battisti, M., 2013, PPS-29: 29th International Conference of the Polymer Processing Society Nuremberg, Germany ; 15 - 19 July 2013 ; book abstracts. Altstädt, V. (ed.). Melville, NY, p. 50-50

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  77. Published

    PP-Polymer Nanocomposites with improved mechanical properties using elongational flow generating devices at the Injection Molding Compounder

    Battisti, M. & Friesenbichler, W., 2013, AIP Conference Proceedings 1593. Melville, NY

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  78. Published

    Reducing Costs through Systematic Development Processes

    Friesenbichler, W., Gröger, T., Vetschera, R. & Hopmann, C., 2013, In: Kunststoffe <München> / Kunststoffe international. 103, p. 35-38

    Research output: Contribution to journal › Article › Research › peer-review

  79. Published

    Reibwerte und Entformungskräfte im konventionellen Spritzguss. Vorhersage durch Grenzflächenspannung?

    Berger, G., Friesenbichler, W., Teichert, C., Langecker, G. & Lugger, M., 2013, 22. Leobener Kunststoff-Kolloquium: Oberlfächen und Grenzflächen in der Polymertechnologie. p. 75-89

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  80. Published

    Simulating the Fatigue Life of Fiber-Reinforced Injection Moldings

    Guster, C., Friesenbichler, W., Gröger, T., Mösenbacher, A. & Brunbauer, J., 2013, In: Kunststoffe <München> / Kunststoffe international. p. 92-94

    Research output: Contribution to journal › Article › Research › peer-review

  81. Published

    Simulation der Lebensdauer faserverstärkter Spritzgussteile

    Guster, C., Friesenbichler, W., Gröger, T., Mösenbacher, A. & Brunbauer, J., 2013, In: Kunststoffe. p. 158-161

    Research output: Contribution to journal › Article › Research › peer-review

  82. Published

    Systematic Virtual Optimization of the Rubber Injection Moulding Process Including Practical Verification

    Fasching, M., Berger, G., Friesenbichler, W. & Gierth, M., 2013, 29th International Conference of the Polymer Processing Society. p. 181-182

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  83. Published

    Variotherm Injection Molding Process with BFMold Technology and Electric Heating: Simulation and Experimental Validation

    Pichler, A., Rus, P., Kukla, C., Berger, G., Müller, F., Lucyshyn, T., Pacher, G. & Friesenbichler, W., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  84. Published

    Wahrnehmungsnahe Messung des Sehens und Fühlens von Kunststoffoberflächen

    Gruber, D. P., Berger, G., Macher, J., Pacher, G. & Friesenbichler, W., 2013, 22. Leobener Kunststoff-Kolloquium: Oberlfächen und Grenzflächen in der Polymertechnologie. p. 138-149

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  85. 2012
  86. Published

    Explosive cartridge

    Moser, P. (Inventor), Bauer, F. (Inventor), Friesenbichler, W. (Inventor), Fertschej, A. (Inventor) & Schatzer, R. (Inventor), 27 Sept 2012, IPC No. F42D 1/ 10 A I, Patent No. AU2011231560, Priority date 25 Mar 2011, Priority No. WO2011EP54635

    Research output: Patent

  87. Published

    Verfahren zur Herstellung eines synthetischen Papiers und damit hergestelltes Papier

    Laske, S. (Inventor), Friesenbichler, W. (Inventor), Langecker, G. (Inventor), Achatz, P. (Inventor) & Burkhalter, R. (Inventor), 15 Jan 2012, Patent No. A 28/2009

    Research output: Patent

  88. Published

    Compression induced heating of rubber compounds under processing conditions

    Perko, L., Friesenbichler, W. & Fellner, C., 2012, Abstract Book - The 28th International Conference of Polymer Processing Society (PPS-28). p. 424-424

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  89. Published

    Elongational viscosity of rubber compounds and improving corresponding models

    Perko, L., Friesenbichler, W., Buchebner, V., Chaloupka, G. & Obendrauf, W., 2012, 5th International PMI Conference - Conference Proceedings. p. 141-146

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  90. Published

    Functional Mold Coatings for Dynamic Mold Surface Temperature Control in Injection Molding. Simulation of Joule Heating of Thin Films and Development of a Test System.

    Pacher, G., Berger, G., Friesenbichler, W. & Weiß, H., 2012, Abstract Book - The 28th International Conference of Polymer Processing Society (PPS-28). p. 495-495

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  91. Published

    Functional Mold Coatings for Dynamic Mold Surface Temperature Control in Injection Molding. Simulation of Joule Heating of Thin Films and Development of a Test System.

    Pacher, G., Berger, G., Friesenbichler, W. & Weiß, H., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  92. Published

    Influence of dynamic mold temperature processes on the weld line strength of bi-directional filled tensile bars. A new multi-functional test injection mold to examine surface defects, thin-wall parts and frozen layer formation.

    Berger, G., Pacher, G. & Friesenbichler, W., 2012, Abstract Book - The 28th International Conference of Polymer Processing Society (PPS-28). p. 215-215

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  93. Published

    Injection molding compounding of polymer nanocomposites

    Battisti, M. & Friesenbichler, W., 2012, Abstract Book - The 28th International Conference of Polymer Processing Society (PPS-28). p. 278-278

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  94. Published

    Injection molding compounding of PP polymer nanocomposites

    Battisti, M. & Friesenbichler, W., 2012, 5th International PMI Conference - Conference Proceedings. p. 134-140

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  95. Published

    Methods for measuring elongational viscosity of rubber compounds and enhancement of corresponding models

    Perko, L., Friesenbichler, W. & Obendrauf, W., 2012, BOOK OF ABSTRACTS ICR 2012 – XVIth International Congress on Rheology. p. 271-271

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  96. Published

    Spritzgießcompoundieren nanoverstärkter Polypropylen-Compounds

    Battisti, M. & Friesenbichler, W., 2012, 21. Leobener Kunststoff-Kolloquium: Mit Compoundieren zum Erfolg. p. 61-68

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  97. Published

    Spritzgießen reaktiver Formmassen

    Friesenbichler, W. & Perko, L., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  98. Published

    Spritzgießen von Kunststoffen

    Friesenbichler, W., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  99. Published

    Systematische Entwicklung von Spritzguss-Bauteilen

    Friesenbichler, W., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  100. Published

    Больше блеска, меньше стыков (More gloss, less welding lines)

    Berger, G., Roock, S., Steinbichler, G., Gießauf, J., Gruber, D. P. & Friesenbichler, W., 2012, In: Plastiks. 113, 7, p. 26-29

    Research output: Contribution to journal › Article › Research › peer-review

  101. 2011
  102. Published

    EXPLOSIVE CARTRIDGE

    Moser, P. (Inventor), Bauer, F. (Inventor), Friesenbichler, W. (Inventor), Fertschej, A. (Inventor) & Schatzer, R. (Inventor), 29 Sept 2011, IPC No. F42D 1/ 10 A I, Patent No. CA2793308, Priority date 25 Mar 2011, Priority No. WO2011EP54635

    Research output: Patent

  103. Published

    EXPLOSIVE CARTRIDGE

    Moser, P. (Inventor), Bauer, F. (Inventor), Friesenbichler, W. (Inventor), Fertschej, A. (Inventor) & Schatzer, R. (Inventor), 29 Sept 2011, IPC No. F42D 1/ 10 A I, Patent No. WO2011117394, Priority date 25 Mar 2010, Priority No. EP20100157815

    Research output: Patent

  104. Published

    Explosive cartridge cartouche explosive

    Bauer, F. (Inventor), Fertschej, A. (Inventor), Friesenbichler, W. (Inventor), Moser, P. (Inventor) & Schatzer, R. (Inventor), 25 Mar 2011

    Research output: Patent

  105. Published

    A new injection moulding machine rheometer to study the rheological behaviour of polymer melts at very high shear-rates

    Selvasankar, R. K., Duretek, I., Friesenbichler, W. & Holzer, C., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

Previous 1 2 3 Next
View graph of relations

Latest Research Output

View more (290)